The problem is that local area connection 4 is getting a 192.168.0.x
address. I had thought that this was because you had inadvertently enabled
ICS on the local area connection for the 192.168.2.1 adapter. Evidently,
this is not the case - So, either the 'modem' is actually a router which
provides this address, or you are connected to a Linux NAT device (L.A.C. on
Linix IGD?) which provides this address. In order to make this
configuration work, you must at the very least change the subnet for local
area connection 4 to something other than 192.168.0.x. Most likely this
should be done on whatever presently resides at 192.168.0.1.

Doug Sherman
MCSE, MCSA, MCP+I, MVP

"Ray" <Ray@discussions.microsoft.com> wrote in message
news:6C8E957C-EA90-4A9C-8CF4-0D7408859144@microsoft.com...
> Seen those before but like I said the problem is I can't even enable ICS
> because I get a error message saying the IP address 192.168.0.1 is already
> used. but I set both LAN connection to get there IPs automatically. Still
> nothing...
>
> "Doug Sherman [MVP]" wrote:
>
> > ICS should be enabled on L.A.C #4 Actiontec Gateway. See:
> >
> > http://support.microsoft.com/kb/314066/en-us
> >
> > And
> >
> > http://support.microsoft.com/kb/308006/en-us
> >
> > Doug Sherman
> > MCSE, MCSA, MCP+I, MVP
> >
> > "Ray" <Ray@discussions.microsoft.com> wrote in message
> > news:9C67CA35-678D-4DFD-9794-B0EF62466CEB@microsoft.com...
> > > can you walk me step by step? which connection should I turn on ICS?
I
> > only
> > > have teo choices. "Xbox" LAN & "Actiontec modem" LAN. The modem LAN is
set
> > to
> > > get it's IP automatically. Then there is the Linix IGD
gateway....looks
> > like
> > > I will be buying a router cause this is crazy....!!!
> > >
> > > "Doug Sherman [MVP]" wrote:
> > >
> > > > Try:
> > > >
> > > > 1. Make sure that you have not inadvertently enabled ICS on the LAN
> > > > connection.
> > > >
> > > > 2. The LAN/xbox network cannot be 192.168.2.x. It must be
192.168.0.x
> > and
> > > > the LAN adapter in the ICS computer must be 192.168.0.1 - you can
set
> > this
> > > > manually or set to obtain an address automatically. Also the LAN
> > adapter
> > > > should not have a default gateway or DNS entry.
> > > >
> > > > Doug Sherman
> > > > MCSE, MCSA, MCP+I, MVP
> > > >
> > > > "Ray" <Ray@discussions.microsoft.com> wrote in message
> > > > news:CEEA3734-B83B-466A-8D0B-B90CCA569AFD@microsoft.com...
> > > > > I'm trying to share the net connection with my xbox. The modem
> > connects to
> > > > > the PC via USB. Then the xbox is hooked on to the NIC. I already
have
> > it
> > > > set
> > > > > up so I can FTP back and forth. The problem is when the xbox is
turned
> > on
> > > > I
> > > > > can't access the internet on the PC. I went to (Network
connections)
> > and
> > > > seen
> > > > > this:
> > > > >
> > > > > Internet Gateway:
> > > > > L.A.C. on Linix IGD (this connection disables and reconnects when
you
> > > > power
> > > > > off the xbox)
> > > > >
> > > > > LAN or High Speed:
> > > > > L.A.C (this is the xbox connection)
> > > > >
> > > > > &
> > > > >
> > > > > L.A.C #4 Actiontec Gateway #2 (this is the modem connection)
> > > > >
> > > > > When I try to go into the Actiontec and check the box for ICS I
get an
> > > > > message saying it will us IP 192.168.0.1 then anerror message
saying:
> > > > >
> > > > > ICS can not be enabled. A LAN connection is already configured
with
> > the IP
> > > > > address that is required for automatic IP adressing.
> > > > >
> > > > > The xbox LAN is set to 192.168.2.1 I tried setting it to (obtain
> > > > > automatically) but got the same error message.
> > > > >
> > > > > I'm lost now I would like to get this working instead of buying a
> > router.
> > > > I
> > > > > have dsl with sprint if that helps any.
> > > > >
> > > > > I did a inconfig and this is what i got:
> > > > >
> > > > > Ethernet adapter local area connection:
> > > > >
> > > > > Connection-specific DNS suffix:
> > > > > IP address..................192.168.2.1
> > > > > subnet mask................255.255.255.0
> > > > > default gateway...........192.168.2.1
> > > > >
> > > > > Ethernet adapter local area connection 4:
> > > > >
> > > > > Connection-specific DNS suffix :domain.actdsltmp
> > > > > IP address..................192.168.0.2
> > > > > Subnet mask..............255.255.255.0
> > > > > Default gateway..........192.168.0.1
> > > > >
> > > >
> > > >
> > > >
> >
> >
> >