Hi Darrell,
Thanks for the reply. The issue was/is pic vs apic. My older images are pic
based and do work on newer apic hardware. Thanks again.
Michael
""Darrell Gorter[MSFT]"" wrote:
> Hello Michael,
> Create the Image with on an APIC ACPI single processor system.
> You can then deploy the image on a APIC ACPI multi processor system and
> have the system detect and install the processors.
> However the system still both have to be APIC ACPI.
> If some of the system are PIC ACPI, you have to create an additional image
> for PIC systems.
>
> There unattended settings were available for Windows 2000 to go from a
> single to a multi processor hal.
> With Windows 2003 and Windows XP the OS should detect the additional
> processor and make the change.
>
>
> This article talks about hal options:
> 309283 HAL options after Windows XP or Windows Server 2003 Setup
> http://support.microsoft.com/?id=309283
>
> Thanks,
> Darrell Gorter[MSFT]
>
> This posting is provided "AS IS" with no warranties, and confers no rights
> --------------------
> <Thread-Topic: Multi hal sysprep images
> <thread-index: AcXiDS6cGs6ZxoWZTLCYPAunwCwMXg==
> <X-WBNR-Posting-Host: 24.39.220.175
> <From: "=?Utf-8?B?TWljaGFlbCBSYWR6aWs=?="
> <MichaelRadzik@discussions.microsoft.com>
> <References: <0B1F88CA-7918-404F-8CE5-532A068D905F@microsoft.com>
> <eN6flya4FHA.3876@TK2MSFTNGP09.phx.gbl>
> <Subject: Re: Multi hal sysprep images
> <Date: Sat, 5 Nov 2005 05:31:09 -0800
> <Lines: 33
> <Message-ID: <7C278003-4249-4240-BFD1-D6539F599F25@microsoft.com>
> <MIME-Version: 1.0
> <Content-Type: text/plain;
> < charset="Utf-8"
> <Content-Transfer-Encoding: 8bit
> <X-Newsreader: Microsoft CDO for Windows 2000
> <Content-Class: urn:content-classes:message
> <Importance: normal
> <Priority: normal
> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> <Newsgroups: microsoft.public.windowsxp.setup_deployment
> <NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
> <Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSF TNGXA03.phx.gbl
> <Xref: TK2MSFTNGXA01.phx.gbl
> microsoft.public.windowsxp.setup_deployment:37367
> <X-Tomcat-NG: microsoft.public.windowsxp.setup_deployment
> <
> <Hello, thank you for the responce. hwid was a typo my part(just copied and
> <pasted). I have tried using acpiapic_up, and ACPI APCI_UP (according to
> MS),
> <each time I am ending up with an image that will not work on a single cpu
> <system.
> <
> <"yjfbee" wrote:
> <
> <> maybe the hwid is wrong .
> <> i write acpiapic_up instead hwid .
> <> can you test it ?
> <>
> <>
> <> "Michael Radzik" <Michael Radzik@discussions.microsoft.com> ôÈëÃûÃ
> ¢ÃÂÎÅ:0B1F88CA-7918-404F-8CE5-532A068D905F@microsoft.com...
> <> > Hello,
> <> >
> <> > I have trying to creat a multi Hal sysprep image. I have created it on
> new
> <> > dual core system and I am using UpdateUPHAL
> <> > "hwid,%SystemDrive%\Sysprep\Hal\Hal.inf" in the sysprep.inf , but I
> have
> <> > been
> <> > able to make a successfully working image, it works on other mp
> machines
> <> > but
> <> > not single cpu models. I am thinking part of the problem is that I do
> not
> <> > have all the neccesary files needed for the Hals, can someone help me
> <> > figure
> <> > out what I should have? Any suggestions, idea , previous experience
> <> > greatly
> <> > appreciated.
> <> >
> <> > Thank you,
> <> > Michael Radzik
> <>
> <>
> <>
> <
>
>