Plus this is an "analog" connection so don't try to capture the video using
WMM you won't like the results.
Instead either use the analog capture software that came with the card (if
there was any) or purchase a digital unit (such as a Dazzle 80) and connect
the camera to that to convert to digital for WMM capture.
--
Wojo's Web:
http://www.remember-christopher.dostweb.com/Wojo's_Place/
Also Please visit.....
http://www.remember-christopher.dost...m/christopher/
"KDE" <knott_me@NOSPAM.hotmail.com> wrote in message
news:%23pDdh1r%23FHA.904@TK2MSFTNGP10.phx.gbl...
> s-video is a "video only" carrier, you still need to use the RCA jacks
> for
> the sound. (red and white)
>
>
> "George" <air1@bellsouth.net> wrote in message
> news:eMRmtOo%23FHA.2036@TK2MSFTNGP14.phx.gbl...
> | When I connect camcorder to PC card using S-video cable and try to
> capture
> | the video, I get no audio. But when I use an RCA-plug connection, I get
> | audio.
> |
> | I wondered if anyone had ideas on how to fix the S-video connection
> problem.
> | Here's setup.
> |
> | SYSTEM. WinXP(pro) PC with Windows Movie Maker, and connecting a Sony
> | digital camcorder, abt 3 yrs old. The PC has an ATI Radeon 9000pro
> | all-in-wonder multimedia card...it has a purple cable that ends into a
> big
> | block that has 4 connectors...S-video, RCA-left, RCA-right, RCA-video.
> |
> | RCA-PLUG CAMCORDER CONNECTION. The camera can output to the three RCA
> plugs
> | (wht, red, yellow), and
> | the ATI card can accept this. When used, works fine, but would still
> like
> to
> | use simpler s-video, and resolve its problem
> |
> | S-VIDEO CAMCORDER CONNECTION. The camera can output to S-Video and the
> ATI
> | card can accept same. I linked with s-video cable. But no audio during
> | capture. Don't think it's cable...it buzzes out perfectly with volt/ohm
> | meter. Don't think its audio card because the card gets "TV-tuner"
> sound,
> | plus microphone, CD, and all else. Also, (X) Line-In is checked in
> Windows,
> | I think. (Oddly, in Windows, for "Recording Controls" you can only check
> one
> | at a time from choices... Line-in, TAD-in, Auxillary, etc.)
> |
> | Thanks for any suggestions,
> | George
> |
> |
>
>