The data you require:-
The camcorder is a: Panasonic model no.: NV-GS400GN.
The Fuji digital camera is a: FinePix F610.
Yes, i think the computer is well maintained. Whenever there is an update, i
download it, including SP2. A defrag was done a few days ago.
I also have a Maxtor100gb OneTouchII attached to it by USB. I did disconnect
this, but it made no difference.
Other details you may need are:-
Windows XP (prof) 5.1
AMD Athlon 1.92GHz
512MB RAM
Thank you for your interest.
--
Philip


"John Inzer" wrote:

> Philip wrote:
> > Hi John, i read the trail of post from Russell to you
> > with great interest, and wondered if you might be able to
> > help me. I recently bought a Panasonic
> > 4.0mp camcorder. Every time i try to connect it to the
> > PC, it fails. After the 'new hardware found' window, it
> > attempts to find the drivers, but comes up with the
> > message 'An error occured during the installation of the
> > device. The required section was not found in the INF.' I
> > have tried it with both the USB and Firewire cable, to no
> > availe. I installed the software on a friends PC, and it
> > worked on his machine. I have also deleted and
> > re-installed both USB Enhanced Host Controlled and OHCI
> > Complient IEEE 1394 Host Controller - still the same.
> > To make things worse - i disconnected my Fuji camera (to
> > take on holidays) and i can't connect it either. It comes
> > up with the same answer.
> ================================
> I don't know if I can help or not...what are
> the model numbers of the two cameras?
>
> Is your system well maintained and up to
> date?
>
> --
>
> John Inzer
> MS Picture It! MVP
> How to ask a newsgroup question:
> http://support.microsoft.com/kb/555375
>
>
>
>