RIGHT CLICK on the blank part of the Desktop, select properties, click on
the SETTINGS TAB, make sure you have TRUE COLOR 32 bit and then see if you
can move the slider to 800 x 600. If not click on the ADVANCE button, go to
adapter and be sure yours is shown. go to Monitor and be sure Plug and Play
is checked.
-- Reboot try a different scanning freq, should be 60 hz



I Have forgotten so much of what I once knew.
"A Stranger is a Friend you haven''t met yet."


"emil_lam" wrote:

> Hi,
>
> I've just bought a Topcon VS-10S 10" monitor from shop. Shop staff had
> shown me clearly the monitor could be displayed in 800x600 resolution
> with 30 bit color (I didn't know his PC configuration). When I
> connected the monitor to my PII PC w/ NVIDIA RIVA TNT display card, XP
> Professional & XP Home installed in 2 separate HDs, I found I could
> only get proper display with VGA mode (640x480). If I changed the
> resolution to higher values, the display immediately turned into a
> mess.
>
> I tried forced XP to search for Topcon's driver but I found no Topcon's
> brand name in monitor driver list.
>
> Please tell me how can I use this 10" in higher resolution ? I checked
> from below url that the best resolution for this monitor should be
> 1024x768.
>
> http://www.aures.com/ang/2_pdv/6_monit/a_vs_10s.html
>
>
>
>