Cari, I ran a program called "Everest computer checks" and it came back with
the following:
Graphics Processor Properties:
Video Adapter Sapphire Radeon 9200 SE
GPU Code Name RV280 (AGP 8x 1002 / 5964, Rev 01)
GPU Clock 200 MHz (original: 200 MHz)
Memory Clock 164 MHz (original: 166 MHz
Is this what we are looking for?
Everest has a complete list of the whole computer if there is anything else
you may need.
--
john22
"Cari (MS-MVP)" wrote:
> Let's see what DirectX identifies it as:
>
> Start, Run (type) dxdiag (enter)
>
> You should find out what graphics card or adapter (built in) you have by
> letting it go through it's 'collecting information' then clicking on the
> Display tab.... Let us know what it says in the Device box.
> --
> Cari (MS-MVP)
> Printing & Imaging
> http://www.coribright.com/windows
>
>
>
> "John" <John@discussions.microsoft.com> wrote in message
> news:03D232EA-2CD3-4F8D-97EB-3E371D7F4973@microsoft.com...
> >I like to learn by doing things myself Cari, but I can't identify the
> > driver's manufacturer. How do I do this?
> > --
> > john22
> >
> >
> > "Cari (MS-MVP)" wrote:
> >
> >> First thing I would do is reinstall your graphics card drivers.... from
> >> the
> >> graphics card manufacturer's website.
> >> --
> >> Cari (MS-MVP)
> >> Printing & Imaging
> >> http://www.coribright.com/windows
> >>
> >>
> >>
> >> "John" <John@discussions.microsoft.com> wrote in message
> >> news:622112B2-0A0B-4504-BA00-99D459898121@microsoft.com...
> >> > Yes Cari there is one which is greyed out which says " Hide modes that
> >> > this
> >> > monitor cannot display"
> >> > --
> >> > john22
> >> >
> >> >
> >> > "Cari (MS-MVP)" wrote:
> >> >
> >> >> Is there a box to check or uncheck above or below it?
> >> >> --
> >> >> Cari (MS-MVP)
> >> >> Printing & Imaging
> >> >> http://www.coribright.com/windows
> >> >>
> >> >>
> >> >>
> >> >> "John" <John@discussions.microsoft.com> wrote in message
> >> >> news
90ACAFD-D20E-4894-8537-602148471649@microsoft.com...
> >> >> > Because of a previous problem it was suggested that I change the
> >> >> > size
> >> >> > of
> >> >> > my
> >> >> > screen resolution, which I did.
> >> >> >
> >> >> > It was also suggested that I change the "Screen refresh rate" if the
> >> >> > screen
> >> >> > starts to flicker. I don't get a choice to change the rate as I only
> >> >> > have
> >> >> > have one choice under the Monitor tab, which is " Use hardware
> >> >> > default
> >> >> > setting".
> >> >> >
> >> >> > The flickering is not a constant problem, but each time I try to
> >> >> > drag a
> >> >> > window display, it is very slow and gives a wobbling effect.
> >> >> > Previously
> >> >> > I
> >> >> > could drag a display across the screen without any problems.
> >> >> >
> >> >> > Any suggestions please.
> >> >> >
> >> >> > john22
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>