Try here
https://support.ati.com/ics/support/...e&folderID=293

--
Graham Hughes
MVP Digital Media
www.myvideoproblems.co.uk
www.dvds2treasure.com
www.simplydv.com


"John" <John@discussions.microsoft.com> wrote in message
news:61BF4812-9A57-4921-BF38-9DB6E63BBF72@microsoft.com...
> Cari, I ran a program called "Everest computer checks" and it came back
> with
> the following:
>
> Graphics Processor Properties:
> Video Adapter Sapphire Radeon 9200 SE
> GPU Code Name RV280 (AGP 8x 1002 / 5964, Rev 01)
> GPU Clock 200 MHz (original: 200 MHz)
> Memory Clock 164 MHz (original: 166 MHz
>
> Is this what we are looking for?
>
> Everest has a complete list of the whole computer if there is anything
> else
> you may need.
> --
> john22
>
>
> "Cari (MS-MVP)" wrote:
>
>> Let's see what DirectX identifies it as:
>>
>> Start, Run (type) dxdiag (enter)
>>
>> You should find out what graphics card or adapter (built in) you have by
>> letting it go through it's 'collecting information' then clicking on the
>> Display tab.... Let us know what it says in the Device box.
>> --
>> Cari (MS-MVP)
>> Printing & Imaging
>> http://www.coribright.com/windows
>>
>>
>>
>> "John" <John@discussions.microsoft.com> wrote in message
>> news:03D232EA-2CD3-4F8D-97EB-3E371D7F4973@microsoft.com...
>> >I like to learn by doing things myself Cari, but I can't identify the
>> > driver's manufacturer. How do I do this?
>> > --
>> > john22
>> >
>> >
>> > "Cari (MS-MVP)" wrote:
>> >
>> >> First thing I would do is reinstall your graphics card drivers....
>> >> from
>> >> the
>> >> graphics card manufacturer's website.
>> >> --
>> >> Cari (MS-MVP)
>> >> Printing & Imaging
>> >> http://www.coribright.com/windows
>> >>
>> >>
>> >>
>> >> "John" <John@discussions.microsoft.com> wrote in message
>> >> news:622112B2-0A0B-4504-BA00-99D459898121@microsoft.com...
>> >> > Yes Cari there is one which is greyed out which says " Hide modes
>> >> > that
>> >> > this
>> >> > monitor cannot display"
>> >> > --
>> >> > john22
>> >> >
>> >> >
>> >> > "Cari (MS-MVP)" wrote:
>> >> >
>> >> >> Is there a box to check or uncheck above or below it?
>> >> >> --
>> >> >> Cari (MS-MVP)
>> >> >> Printing & Imaging
>> >> >> http://www.coribright.com/windows
>> >> >>
>> >> >>
>> >> >>
>> >> >> "John" <John@discussions.microsoft.com> wrote in message
>> >> >> news90ACAFD-D20E-4894-8537-602148471649@microsoft.com...
>> >> >> > Because of a previous problem it was suggested that I change the
>> >> >> > size
>> >> >> > of
>> >> >> > my
>> >> >> > screen resolution, which I did.
>> >> >> >
>> >> >> > It was also suggested that I change the "Screen refresh rate" if
>> >> >> > the
>> >> >> > screen
>> >> >> > starts to flicker. I don't get a choice to change the rate as I
>> >> >> > only
>> >> >> > have
>> >> >> > have one choice under the Monitor tab, which is " Use hardware
>> >> >> > default
>> >> >> > setting".
>> >> >> >
>> >> >> > The flickering is not a constant problem, but each time I try to
>> >> >> > drag a
>> >> >> > window display, it is very slow and gives a wobbling effect.
>> >> >> > Previously
>> >> >> > I
>> >> >> > could drag a display across the screen without any problems.
>> >> >> >
>> >> >> > Any suggestions please.
>> >> >> >
>> >> >> > john22
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>