Currently on Microsoft Windows XP Professional edition with SP2 can't seen to
update to Microsoft .Net Framework 2.0: x86 (KB829019) and receiving Error
Code:0x643 and the only anti-spyware program are Microsoft AntiSpyware beta
and Ad-Aware SE Professional. Also no Framework 2.0 beta installed. So how
can I install the update to Framework 2.0?

I have got Error 0x1011 3 out of 3 times trying to install this update how do
I fix?

"Something" wrote:

> Currently on Microsoft Windows XP Professional edition with SP2 can't seen to
> update to Microsoft .Net Framework 2.0: x86 (KB829019) and receiving Error
> Code:0x643 and the only anti-spyware program are Microsoft AntiSpyware beta
> and Ad-Aware SE Professional. Also no Framework 2.0 beta installed. So how
> can I install the update to Framework 2.0?
>

I had Microsoft NET framework 2.0 beta 2 installed that was the problem,after
I uninstalled Microsoft .Net Framework 2.0 beta 2 the update to
Microsoft .Net Framework 2.0: x86 (KB829019) worked fine
"madgamerps2" wrote:

> I have got Error 0x1011 3 out of 3 times trying to install this update how do
> I fix?
>
> "Something" wrote:
>
> > Currently on Microsoft Windows XP Professional edition with SP2 can't seen to
> > update to Microsoft .Net Framework 2.0: x86 (KB829019) and receiving Error
> > Code:0x643 and the only anti-spyware program are Microsoft AntiSpyware beta
> > and Ad-Aware SE Professional. Also no Framework 2.0 beta installed. So how
> > can I install the update to Framework 2.0?
> >

Still have the same Error message of Code:0x643

"madgamerps2" wrote:

> I had Microsoft NET framework 2.0 beta 2 installed that was the problem,after
> I uninstalled Microsoft .Net Framework 2.0 beta 2 the update to
> Microsoft .Net Framework 2.0: x86 (KB829019) worked fine
> "madgamerps2" wrote:
>
> > I have got Error 0x1011 3 out of 3 times trying to install this update how do
> > I fix?
> >
> > "Something" wrote:
> >
> > > Currently on Microsoft Windows XP Professional edition with SP2 can't seen to
> > > update to Microsoft .Net Framework 2.0: x86 (KB829019) and receiving Error
> > > Code:0x643 and the only anti-spyware program are Microsoft AntiSpyware beta
> > > and Ad-Aware SE Professional. Also no Framework 2.0 beta installed. So how
> > > can I install the update to Framework 2.0?
> > >

Were you on the Beta version? If not then that suggestion would not apply.

I found a reference to one person with the same error message, caused by
apparently having 'too many firewalls' active.

Reduce your firewall protection and try again (go offline, disable any
third-party firewall, and ensure that Windows Firewall is active - then go
back online)


see if that helps.


--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"Something" <Something@discussions.microsoft.com> wrote in message
news:5D8373F7-D040-464F-B41D-BBD6C150036F@microsoft.com...
> Still have the same Error message of Code:0x643
>
> "madgamerps2" wrote:
>
>> I had Microsoft NET framework 2.0 beta 2 installed that was the
>> problem,after
>> I uninstalled Microsoft .Net Framework 2.0 beta 2 the update to
>> Microsoft .Net Framework 2.0: x86 (KB829019) worked fine
>> "madgamerps2" wrote:
>>
>> > I have got Error 0x1011 3 out of 3 times trying to install this update
>> > how do
>> > I fix?
>> >
>> > "Something" wrote:
>> >
>> > > Currently on Microsoft Windows XP Professional edition with SP2 can't
>> > > seen to
>> > > update to Microsoft .Net Framework 2.0: x86 (KB829019) and receiving
>> > > Error
>> > > Code:0x643 and the only anti-spyware program are Microsoft
>> > > AntiSpyware beta
>> > > and Ad-Aware SE Professional. Also no Framework 2.0 beta installed.
>> > > So how
>> > > can I install the update to Framework 2.0?
>> > >

Ah I shut down my firewall and still getting the same error Code:0x643.

"Noel Paton" wrote:

> Were you on the Beta version? If not then that suggestion would not apply.
>
> I found a reference to one person with the same error message, caused by
> apparently having 'too many firewalls' active.
>
> Reduce your firewall protection and try again (go offline, disable any
> third-party firewall, and ensure that Windows Firewall is active - then go
> back online)
>
>
> see if that helps.
>
>
> --
> Noel Paton (MS-MVP 2002-2006, Windows)
>
> Nil Carborundum Illegitemi
> http://www.crashfixpc.com/millsrpch.htm
>
> http://tinyurl.com/6oztj
>
> Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
>
> "Something" <Something@discussions.microsoft.com> wrote in message
> news:5D8373F7-D040-464F-B41D-BBD6C150036F@microsoft.com...
> > Still have the same Error message of
> >
> > "madgamerps2" wrote:
> >
> >> I had Microsoft NET framework 2.0 beta 2 installed that was the
> >> problem,after
> >> I uninstalled Microsoft .Net Framework 2.0 beta 2 the update to
> >> Microsoft .Net Framework 2.0: x86 (KB829019) worked fine
> >> "madgamerps2" wrote:
> >>
> >> > I have got Error 0x1011 3 out of 3 times trying to install this update
> >> > how do
> >> > I fix?
> >> >
> >> > "Something" wrote:
> >> >
> >> > > Currently on Microsoft Windows XP Professional edition with SP2 can't
> >> > > seen to
> >> > > update to Microsoft .Net Framework 2.0: x86 (KB829019) and receiving
> >> > > Error
> >> > > Code:0x643 and the only anti-spyware program are Microsoft
> >> > > AntiSpyware beta
> >> > > and Ad-Aware SE Professional. Also no Framework 2.0 beta installed.
> >> > > So how
> >> > > can I install the update to Framework 2.0?
> >> > >
>
>
>

I have been unable to install the .NET update. I am running Windows 2000
Professional on an IBM ThinkPad Laptop. I do not have any beta versions of
..net installed. I have Microsoft .Net Framework 1.1 as well as the hotfix
for it - (KB886903). I tried installing it with the critical updates, then
seperate from the critical updates. Both times I got error 0x659; I have no
idea what that error means.

Additionally, as recommended on this forum, I tried going to the Microsoft
..NET Framework developer centerand downloading/installing it directly from
that site
(http://msdn.microsoft.com/netframewo.../default.aspx). I
tried installing the Redistributal Package (2.0 x86) as the site says this
must be installed before installing the SDK 2.0 x86 package. It was unable
to install; the error message said that it either could not open the
installation package or a required file.

The only thing I have yet to try is to uninstall the 1.1 version (and
hotfix) before trying to install the 2.0 version. I did not think this was
necessarily causing a problem since all the posts I have read so far said
that only those people with beta versions had to uninstall them first.

I will post again once I have tried uninstalling version 1.1 first.

-tnlindsey

"Something" wrote:

> Ah I shut down my firewall and still getting the same error Code:0x643.
>
> "Noel Paton" wrote:
>
> > Were you on the Beta version? If not then that suggestion would not apply.
> >
> > I found a reference to one person with the same error message, caused by
> > apparently having 'too many firewalls' active.
> >
> > Reduce your firewall protection and try again (go offline, disable any
> > third-party firewall, and ensure that Windows Firewall is active - then go
> > back online)
> >
> >
> > see if that helps.
> >
> >
> > --
> > Noel Paton (MS-MVP 2002-2006, Windows)
> >
> > Nil Carborundum Illegitemi
> > http://www.crashfixpc.com/millsrpch.htm
> >
> > http://tinyurl.com/6oztj
> >
> > Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
> >
> > "Something" <Something@discussions.microsoft.com> wrote in message
> > news:5D8373F7-D040-464F-B41D-BBD6C150036F@microsoft.com...
> > > Still have the same Error message of
> > >
> > > "madgamerps2" wrote:
> > >
> > >> I had Microsoft NET framework 2.0 beta 2 installed that was the
> > >> problem,after
> > >> I uninstalled Microsoft .Net Framework 2.0 beta 2 the update to
> > >> Microsoft .Net Framework 2.0: x86 (KB829019) worked fine
> > >> "madgamerps2" wrote:
> > >>
> > >> > I have got Error 0x1011 3 out of 3 times trying to install this update
> > >> > how do
> > >> > I fix?
> > >> >
> > >> > "Something" wrote:
> > >> >
> > >> > > Currently on Microsoft Windows XP Professional edition with SP2 can't
> > >> > > seen to
> > >> > > update to Microsoft .Net Framework 2.0: x86 (KB829019) and receiving
> > >> > > Error
> > >> > > Code:0x643 and the only anti-spyware program are Microsoft
> > >> > > AntiSpyware beta
> > >> > > and Ad-Aware SE Professional. Also no Framework 2.0 beta installed.
> > >> > > So how
> > >> > > can I install the update to Framework 2.0?
> > >> > >
> >
> >
> >

Ever think about beginning a new thread about /your/ problem, instead of
"piggybacking" onto all these other threads, no matter how similar their
problems may be?
--
~PA Bear

tnlindsey wrote:
> I have been unable to install the .NET update. I am running Windows 2000
> Professional on an IBM ThinkPad Laptop. I do not have any beta versions
> of .net installed. I have Microsoft .Net Framework 1.1 as well as the
> hotfix for it - (KB886903). I tried installing it with the critical
> updates, then seperate from the critical updates. Both times I got error
> 0x659; I have no idea what that error means.
>
> Additionally, as recommended on this forum, I tried going to the Microsoft
> .NET Framework developer centerand downloading/installing it directly from
> that site
> (http://msdn.microsoft.com/netframewo.../default.aspx).
> I tried installing the Redistributal Package (2.0 x86) as the site says
> this must be installed before installing the SDK 2.0 x86 package. It was
> unable to install; the error message said that it either could not open
> the installation package or a required file.
>
> The only thing I have yet to try is to uninstall the 1.1 version (and
> hotfix) before trying to install the 2.0 version. I did not think this
> was necessarily causing a problem since all the posts I have read so far
> said that only those people with beta versions had to uninstall them
> first.
>
> I will post again once I have tried uninstalling version 1.1 first.\
<snip>

Well for me always I received the same error Code:0x643 when I tried to
update to .Net Framework 2.0.


"PA Bear" wrote:

> Ever think about beginning a new thread about /your/ problem, instead of
> "piggybacking" onto all these other threads, no matter how similar their
> problems may be?
> --
> ~PA Bear
>
> tnlindsey wrote:
> > I have been unable to install the .NET update. I am running Windows 2000
> > Professional on an IBM ThinkPad Laptop. I do not have any beta versions
> > of .net installed. I have Microsoft .Net Framework 1.1 as well as the
> > hotfix for it - (KB886903). I tried installing it with the critical
> > updates, then seperate from the critical updates. Both times I got error
> > 0x659; I have no idea what that error means.
> >
> > Additionally, as recommended on this forum, I tried going to the Microsoft
> > .NET Framework developer centerand downloading/installing it directly from
> > that site
> > (http://msdn.microsoft.com/netframewo.../default.aspx).
> > I tried installing the Redistributal Package (2.0 x86) as the site says
> > this must be installed before installing the SDK 2.0 x86 package. It was
> > unable to install; the error message said that it either could not open
> > the installation package or a required file.
> >
> > The only thing I have yet to try is to uninstall the 1.1 version (and
> > hotfix) before trying to install the 2.0 version. I did not think this
> > was necessarily causing a problem since all the posts I have read so far
> > said that only those people with beta versions had to uninstall them
> > first.
> >
> > I will post again once I have tried uninstalling version 1.1 first.\
> <snip>
>
>

(I'm working on it - honest!) - PABear's comment was directed purely at the
post from tnlindsey, and was definitely not pointed in your direction!!

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"Something" <Something@discussions.microsoft.com> wrote in message
newsD31C4CC-42A6-4B83-BA23-AC7E2AFB3CB3@microsoft.com...
> Well for me always I received the same error Code:0x643 when I tried to
> update to .Net Framework 2.0.
>
>