Re: failure to install DirectX security update

I don't have this problem. My machine doesn't have a touchpad
and I don't see process mentioned below. The task manager shows
the CPU is 98% idle.

Today I tried manually downloading the update. In this case, too,
the installation hangs. It hangs almost at the beginning while
"Checking for necessary space."

Would appreciate any other suggestions to help get around this.

Anoop

DG wrote:
> There appears to be a problem with the Synpatics touchpad driver on many
> laptops. My install hangs with high CPU use ~70% by the SynTPenh.exe
> driver. Others have noted the same behavior. Here's how I got the update
> to work.
>
> Download the update directly from the microsoft site here:
>
> http://www.microsoft.com/technet/sec.../ms05-050.mspx
>
> I ran the update, had it stall as usual, then went to task manager, verifed
> that the above mentioned driver was using up lots of CPU time, then ended
> the process. The update then continued to proceed on its own without a
> hitch.
>
> A followup check of windows update verifies that the install went correctly
> and requires no more updates.
>
>
> <ghanwani@gmail.com> wrote in message
> news:1129959569.054274.164670@g43g2000cwa.googlegr oups.com...
> > MS Update has failed to install the following Win 2K update
> > 2 times - Security Update for DirectX 9 for Windows 2000
> > (KB904706).
> >
> > The error code that I get is 0x800706BE. It downloads and
> > initializes the updates fine, but when it starts installing,
> > it freezes halfway through the process and ultimately gives up.
> > This has happened on two separate occasions.
> >
> > FWIW, I'm running Windows 2000 SP4 and all of the critical
> > updates. I also have Norton Antivirus 2005. I've never had a
> > problem with the updates before.
> >
> > Would appreciate any help with dealing with this issue.

I have the exact same problem. Windows2000 SP4 with all updates except
Security Update for DirectX 9 for Windows 2000 (KB904706) that freezes when
it starts installing. Did you get yours fixed? If you did I would appreciate
if you can share it with me.


"ghanwani@gmail.com" wrote:

>
> I don't have this problem. My machine doesn't have a touchpad
> and I don't see process mentioned below. The task manager shows
> the CPU is 98% idle.
>
> Today I tried manually downloading the update. In this case, too,
> the installation hangs. It hangs almost at the beginning while
> "Checking for necessary space."
>
> Would appreciate any other suggestions to help get around this.
>
> Anoop
>
> DG wrote:
> > There appears to be a problem with the Synpatics touchpad driver on many
> > laptops. My install hangs with high CPU use ~70% by the SynTPenh.exe
> > driver. Others have noted the same behavior. Here's how I got the update
> > to work.
> >
> > Download the update directly from the microsoft site here:
> >
> > http://www.microsoft.com/technet/sec.../ms05-050.mspx
> >
> > I ran the update, had it stall as usual, then went to task manager, verifed
> > that the above mentioned driver was using up lots of CPU time, then ended
> > the process. The update then continued to proceed on its own without a
> > hitch.
> >
> > A followup check of windows update verifies that the install went correctly
> > and requires no more updates.
> >
> >
> > <ghanwani@gmail.com> wrote in message
> > news:1129959569.054274.164670@g43g2000cwa.googlegr oups.com...
> > > MS Update has failed to install the following Win 2K update
> > > 2 times - Security Update for DirectX 9 for Windows 2000
> > > (KB904706).
> > >
> > > The error code that I get is 0x800706BE. It downloads and
> > > initializes the updates fine, but when it starts installing,
> > > it freezes halfway through the process and ultimately gives up.
> > > This has happened on two separate occasions.
> > >
> > > FWIW, I'm running Windows 2000 SP4 and all of the critical
> > > updates. I also have Norton Antivirus 2005. I've never had a
> > > problem with the updates before.
> > >
> > > Would appreciate any help with dealing with this issue.
>
>

My problem was caused by the Synaptics touchpad driver on the laptop. I used
an external mouse to stop that process in Task Manager and afterwards run the
update from the separate downloaded file and it fixed the problem.

"agl806" wrote:

> I have the exact same problem. Windows2000 SP4 with all updates except
> Security Update for DirectX 9 for Windows 2000 (KB904706) that freezes when
> it starts installing. Did you get yours fixed? If you did I would appreciate
> if you can share it with me.
>
>
> "ghanwani@gmail.com" wrote:
>
> >
> > I don't have this problem. My machine doesn't have a touchpad
> > and I don't see process mentioned below. The task manager shows
> > the CPU is 98% idle.
> >
> > Today I tried manually downloading the update. In this case, too,
> > the installation hangs. It hangs almost at the beginning while
> > "Checking for necessary space."
> >
> > Would appreciate any other suggestions to help get around this.
> >
> > Anoop
> >
> > DG wrote:
> > > There appears to be a problem with the Synpatics touchpad driver on many
> > > laptops. My install hangs with high CPU use ~70% by the SynTPenh.exe
> > > driver. Others have noted the same behavior. Here's how I got the update
> > > to work.
> > >
> > > Download the update directly from the microsoft site here:
> > >
> > > http://www.microsoft.com/technet/sec.../ms05-050.mspx
> > >
> > > I ran the update, had it stall as usual, then went to task manager, verifed
> > > that the above mentioned driver was using up lots of CPU time, then ended
> > > the process. The update then continued to proceed on its own without a
> > > hitch.
> > >
> > > A followup check of windows update verifies that the install went correctly
> > > and requires no more updates.
> > >
> > >
> > > <ghanwani@gmail.com> wrote in message
> > > news:1129959569.054274.164670@g43g2000cwa.googlegr oups.com...
> > > > MS Update has failed to install the following Win 2K update
> > > > 2 times - Security Update for DirectX 9 for Windows 2000
> > > > (KB904706).
> > > >
> > > > The error code that I get is 0x800706BE. It downloads and
> > > > initializes the updates fine, but when it starts installing,
> > > > it freezes halfway through the process and ultimately gives up.
> > > > This has happened on two separate occasions.
> > > >
> > > > FWIW, I'm running Windows 2000 SP4 and all of the critical
> > > > updates. I also have Norton Antivirus 2005. I've never had a
> > > > problem with the updates before.
> > > >
> > > > Would appreciate any help with dealing with this issue.
> >
> >

agl806 wrote:
> I have the exact same problem. Windows2000 SP4 with all updates except
> Security Update for DirectX 9 for Windows 2000 (KB904706) that freezes when
> it starts installing. Did you get yours fixed? If you did I would appreciate
> if you can share it with me.

Nope. Haven't been able to resolve the issue yet. I still have
Windows
Update telling me I have updates ready to install, but I just ignore
it. If
other updates show up, I usually make sure to uncheck this one so that
the others can install.

Does anyone know if we can post this issue somewhere where someone
from Microsoft might be able to help? It looks like quite a few people
have
been experiencing the same issue.

Anoop

HI, Iam suresh

I found the same problem in installing the update.
The system got hangs if the installation is started and CPU usage will be 100%

My system Conf:
CPU : AMD Athlon 64 3200+
MB : K8N NEO4-F

Please suggest to solve this problem
"ghanwani@gmail.com" wrote:

>
> agl806 wrote:
> > I have the exact same problem. Windows2000 SP4 with all updates except
> > Security Update for DirectX 9 for Windows 2000 (KB904706) that freezes when
> > it starts installing. Did you get yours fixed? If you did I would appreciate
> > if you can share it with me.
>
> Nope. Haven't been able to resolve the issue yet. I still have
> Windows
> Update telling me I have updates ready to install, but I just ignore
> it. If
> other updates show up, I usually make sure to uncheck this one so that
> the others can install.
>
> Does anyone know if we can post this issue somewhere where someone
> from Microsoft might be able to help? It looks like quite a few people
> have
> been experiencing the same issue.
>
> Anoop
>
>