Windows error message

Glo

Before trying again reboot your machine and do not load any programmes
e.g. Internet Explorer etc. Then select start, Run, type "regsvr32
shodocvw.dll" without the quotes and hit ENTER. Note the time and if it
gives a fail message look in Event Viewer for any messages two minutes
before and after the error occurred and post a copy here.

Where are you with regard to downloading and installing Windows updates?

--


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Using invalid email address

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.

http://dts-l.org/goodpost.htm

~~~~~~~~~~~~~~~~~~~~~~~~


"Glo" <glo@discussions.microsoft.com> wrote in message
news:6ABB3103-110E-4EEE-A92A-22264A7E2367@microsoft.com...
> Hi
> I tried what you stated and when I pressed enter this box came up
> saying,
> RegSvv32
> Yellow triangle LoadLibrary ("shodocvw.dll")failed - The specified
> module
> could not be found.
> Also the error reporting box still comes up everytime I leave the
> internet.
> I did restart my computer after doing this just in case it would work,
> but
> no, it is still the same.
> Any other suggestions would be great, Thank you.
> --
> Glo
>
>
> "Gerry Cornell" wrote:
>
>> Glo
>>
>> For the Internet Explorer errors try:
>>
>> Start, Run, type "regsvr32 shodocvw.dll" without the quotes and hit
>> ENTER. Check later after surfing whether the Application Errors have
>> ceased.
>>
>> You also appear to have encountered problems on 15 November trying to
>> download the November Critical Updates. I am not sure why but you
>> seem
>> to have tried to download / install whilst in Safe Mode, which has
>> resulted in services needed to execute the update not being
>> available.
>>
>> In normal mode select Start, Help and Support, Keep your computer up
>> to
>> date with Windows Update and then follow the instructions on the
>> screen.
>>
>> --
>>
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> FCA
>>
>> Using invalid email address
>>
>> Stourport, Worcs, England
>> Enquire, plan and execute.
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> Please tell the newsgroup how any
>> suggested solution worked for you.
>>
>> http://dts-l.org/goodpost.htm
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>>
>>
>> "Glo" <glo@discussions.microsoft.com> wrote in message
>> news:1B36B4B9-D910-4B84-9063-9236AC41A7A6@microsoft.com...
>> > While waiting for your reply I have tried the following. I did
>> > that
>> > msconfig
>> > in run and went to the start-up and unticked the two lines with the
>> > boxes in
>> > a rowj. I restarted the computer and the error messages did not
>> > appear, but
>> > it said about putting back to normal start up. When I do the two
>> > lines with
>> > the boxes are ticked again, I can't seem to get rid of them. I am
>> > still
>> > getting messages everytime I come off the internet and sending
>> > reports
>> > to
>> > microsoft. So I don't know what else to do, I will have to wait
>> > for
>> > your
>> > reply as I don't want to fiddle too much as I broke my last
>> > computer.
>> > Hope
>> > to hear from you soon, Thank you.
>> > --
>> > Glo
>> >
>> >
>> > "Gerry Cornell" wrote:
>> >
>> >> Glo
>> >>
>> >>
>> >> I now need copies of those Error Reports in Event Viewer on
>> >> Application
>> >> and System tab for the last 2 days. Post only copies of Reports
>> >> where
>> >> the Event Type = Error.
>> >>
>> >> You can access Event Viewer by selecting Start, Administrative
>> >> Tools,
>> >> Event Viewer.
>> >> When researching the meaning of the error, information regarding
>> >> Event
>> >> ID, Source
>> >> and Description are important.
>> >>
>> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
>> >> http://support.microsoft.com/default...&Product=winxp
>> >>
>> >> A tip for posting copies of Error Reports! Run Event Viewer and
>> >> double
>> >> click on the
>> >> error you want to copy. In the window, which appears is a button
>> >> resembling two
>> >> pages. Double click the button and close Event Viewer. Now start
>> >> your
>> >> message
>> >> (email) and do a paste into the body of the message. This will
>> >> paste
>> >> the
>> >> info from the
>> >> Event Viewer Error Report complete with links into the message.
>> >> Make
>> >> sure this is
>> >> the first paste after exiting from Event Viewer.
>> >>
>> >> BTW in what country do you live?
>> >>
>> >>
>> >> --
>> >>
>> >>
>> >> Hope this helps.
>> >>
>> >> Gerry
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> FCA
>> >>
>> >> Using invalid email address
>> >>
>> >> Stourport, Worcs, England
>> >> Enquire, plan and execute.
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> Please tell the newsgroup how any
>> >> suggested solution worked for you.
>> >>
>> >> http://dts-l.org/goodpost.htm
>> >>
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >>
>> >> "Glo" <glo@discussions.microsoft.com> wrote in message
>> >> news:98DF935E-6EE2-4AF5-87FF-6A883D4A142F@microsoft.com...
>> >> >I forgot to mention I keep getting error reports that I send off
>> >> >to
>> >> > microsoft, it seems to be happening alot even when I leave here
>> >> > and
>> >> > start
>> >> > closing the system down, so I don't know if that has something
>> >> > to
>> >> > do
>> >> > with it.
>> >> > --
>> >> > Glo
>> >> >
>> >> >
>> >> > "Glo" wrote:
>> >> >
>> >> >> Hi
>> >> >> My computer is a Medion which I bought from PC World about 5
>> >> >> years
>> >> >> ago,
>> >> >> can't remember exactly when. I have a product recovery c.d and
>> >> >> an
>> >> >> Application and support C.D. The file system is NTFS and it
>> >> >> boots
>> >> >> alright
>> >> >> and I have not noticed anything wrong or not working. I am
>> >> >> posting
>> >> >> from this
>> >> >> computer as it is the only one I have. A few days ago it was
>> >> >> fine
>> >> >> until I
>> >> >> messed it up trying to put this panda software on from a email
>> >> >> I
>> >> >> got
>> >> >> from
>> >> >> them, and took off my e-trust. Then I could not connect to the
>> >> >> internet
>> >> >> until it took me about 10 hours to work out that my user-name
>> >> >> was
>> >> >> not
>> >> >> correct. That is when these messages started. Thank you for
>> >> >> explaining how
>> >> >> to do things you want me to look at otherwise I would not have
>> >> >> a
>> >> >> clue. To me
>> >> >> the computer is like an ocean, it is very large and I will
>> >> >> never
>> >> >> know
>> >> >> all
>> >> >> about it or remember. I hope you can still help me and if I
>> >> >> put
>> >> >> that
>> >> >> recovery disk in would I loose all my software ect. that I have
>> >> >> installed?
>> >> >> Hope to hear from you soon, cheers.
>> >> >> --
>> >> >> Glo
>> >> >>
>> >> >>
>> >> >> "Gerry Cornell" wrote:
>> >> >>
>> >> >> > What is the make and model of your computer?
>> >> >> >
>> >> >> > Do you have a boot disk or Windows XP CD or both?
>> >> >> >
>> >> >> > Is the hard drive formatted as FAT32 or NTFS? -In Windows
>> >> >> > Explorer
>> >> >> > right
>> >> >> > click on your C drive and select Properties. You will see the
>> >> >> > required
>> >> >> > information after File System.
>> >> >> >
>> >> >> > Despite the error messages does the computer boot to the
>> >> >> > Desktop
>> >> >> > and do
>> >> >> > all icons Display?
>> >> >> >
>> >> >> > Are you posting from the computer or another computer?
>> >> >> >
>> >> >> > What doesn't work?
>> >> >> >
>> >> >> > On what date did the computer last boot without any
>> >> >> > noticeable
>> >> >> > error?
>> >> >> >
>> >> >> > Can you access the Desktop without crashing in Safe Mode?
>> >> >> >
>> >> >> > A description of the Safe Mode Boot options in Windows XP
>> >> >> > http://support.microsoft.com/default...b;en-us;315222
>> >> >> >
>> >> >> > --
>> >> >> >
>> >> >> >
>> >> >> > Hope this helps.
>> >> >> >
>> >> >> > Gerry
>> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> > FCA
>> >> >> >
>> >> >> > Using invalid email address
>> >> >> >
>> >> >> > Stourport, Worcs, England
>> >> >> > Enquire, plan and execute.
>> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> > Please tell the newsgroup how any
>> >> >> > suggested solution worked for you.
>> >> >> >
>> >> >> > http://dts-l.org/goodpost.htm
>> >> >> >
>> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >
>> >> >> > "Glo" <glo@discussions.microsoft.com> wrote in message
>> >> >> > news:FBF62BDA-6861-440B-8F43-AC7721F3B616@microsoft.com...
>> >> >> > > Hi
>> >> >> > > I have been through event viewer and this is what came up,
>> >> >> > > I
>> >> >> > > will
>> >> >> > > try
>> >> >> > > and
>> >> >> > > copy it to you.
>> >> >> > > This is one error as there is quite a few. Do you need all
>> >> >> > > the
>> >> >> > > errors? I
>> >> >> > > will include the two messages I receive after the computer
>> >> >> > > starts
>> >> >> > > and
>> >> >> > > the
>> >> >> > > welcome comes up then the desktop and straight after that
>> >> >> > > the
>> >> >> > > first
>> >> >> > > box
>> >> >> > > appears. It has five boxes at the left hand side in a
>> >> >> > > straight
>> >> >> > > line
>> >> >> > > and the
>> >> >> > > message reads. Windows cannot find (it has two boxes in a
>> >> >> > > straight
>> >> >> > > line).
>> >> >> > > Make sure you typed the name correctly and then try again.
>> >> >> > > To
>> >> >> > > search
>> >> >> > > for a
>> >> >> > > file, click start button then click search.
>> >> >> > > The second box reads: Desktop as the title on the left hand
>> >> >> > > side
>> >> >> > > and
>> >> >> > > iis
>> >> >> > > starts the message with a yellow triangle stating. Could
>> >> >> > > not
>> >> >> > > run
>> >> >> > > or
>> >> >> > > load
>> >> >> > > then two boxes in a line. specified in the registry. Make
>> >> >> > > sure
>> >> >> > > the
>> >> >> > > file
>> >> >> > > exits on your computer or remove the reference to it in the
>> >> >> > > registry.
>> >> >> > > That is all it states so I hope this helps you help me to
>> >> >> > > get
>> >> >> > > rid
>> >> >> > > of
>> >> >> > > them.
>> >> >> > > Sorry I could not get back to you any quicker, I been out
>> >> >> > > all
>> >> >> > > day,
>> >> >> > > hope to
>> >> >> > > hear from you soon, Thank you for taking the time to help
>> >> >> > > me.
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > > Event Type: Error
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > > Event Source: Application Error
>> >> >> > > Event Category: None
>> >> >> > > Event ID: 1001
>> >> >> > > Date: 17/11/2005
>> >> >> > > Time: 18:23:43
>> >> >> > > User: N/A
>> >> >> > > Computer: FAMILYROOM
>> >> >> > > Description:
>> >> >> > > Fault bucket 230159893.
>> >> >> > >
>> >> >> > > For more information, see Help and Support Center at
>> >> >> > > http://go.microsoft.com/fwlink/events.asp.
>> >> >> > > Data:
>> >> >> > > 0000: 42 75 63 6b 65 74 3a 20 Bucket:
>> >> >> > > 0008: 32 33 30 31 35 39 38 39 23015989
>> >> >> > > 0010: 33 0d 0a 3..
>> >> >> > > This i
>> >> >> > >
>> >> >> > >
>> >> >> > > --
>> >> >> > > Glo
>> >> >> > >
>> >> >> > >

Hi
Do you mean restart computer as normal or do I have to do something to stop
all my programs coming up? I did go to windows update and it said I was up to
date with everything.
--
Glo


"Gerry Cornell" wrote:

> Glo
>
> Before trying again reboot your machine and do not load any programmes
> e.g. Internet Explorer etc. Then select start, Run, type "regsvr32
> shodocvw.dll" without the quotes and hit ENTER. Note the time and if it
> gives a fail message look in Event Viewer for any messages two minutes
> before and after the error occurred and post a copy here.
>
> Where are you with regard to downloading and installing Windows updates?
>
> --
>
>
> Hope this helps.
>
> Gerry
> ~~~~~~~~~~~~~~~~~~~~~~~~
> FCA
>
> Using invalid email address
>
> Stourport, Worcs, England
> Enquire, plan and execute.
> ~~~~~~~~~~~~~~~~~~~~~~~~
> Please tell the newsgroup how any
> suggested solution worked for you.
>
> http://dts-l.org/goodpost.htm
>
> ~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> "Glo" <glo@discussions.microsoft.com> wrote in message
> news:6ABB3103-110E-4EEE-A92A-22264A7E2367@microsoft.com...
> > Hi
> > I tried what you stated and when I pressed enter this box came up
> > saying,
> > RegSvv32
> > Yellow triangle LoadLibrary ("shodocvw.dll")failed - The specified
> > module
> > could not be found.
> > Also the error reporting box still comes up everytime I leave the
> > internet.
> > I did restart my computer after doing this just in case it would work,
> > but
> > no, it is still the same.
> > Any other suggestions would be great, Thank you.
> > --
> > Glo
> >
> >
> > "Gerry Cornell" wrote:
> >
> >> Glo
> >>
> >> For the Internet Explorer errors try:
> >>
> >> Start, Run, type "regsvr32 shodocvw.dll" without the quotes and hit
> >> ENTER. Check later after surfing whether the Application Errors have
> >> ceased.
> >>
> >> You also appear to have encountered problems on 15 November trying to
> >> download the November Critical Updates. I am not sure why but you
> >> seem
> >> to have tried to download / install whilst in Safe Mode, which has
> >> resulted in services needed to execute the update not being
> >> available.
> >>
> >> In normal mode select Start, Help and Support, Keep your computer up
> >> to
> >> date with Windows Update and then follow the instructions on the
> >> screen.
> >>
> >> --
> >>
> >>
> >> Hope this helps.
> >>
> >> Gerry
> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> FCA
> >>
> >> Using invalid email address
> >>
> >> Stourport, Worcs, England
> >> Enquire, plan and execute.
> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> Please tell the newsgroup how any
> >> suggested solution worked for you.
> >>
> >> http://dts-l.org/goodpost.htm
> >>
> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >>
> >>
> >> "Glo" <glo@discussions.microsoft.com> wrote in message
> >> news:1B36B4B9-D910-4B84-9063-9236AC41A7A6@microsoft.com...
> >> > While waiting for your reply I have tried the following. I did
> >> > that
> >> > msconfig
> >> > in run and went to the start-up and unticked the two lines with the
> >> > boxes in
> >> > a rowj. I restarted the computer and the error messages did not
> >> > appear, but
> >> > it said about putting back to normal start up. When I do the two
> >> > lines with
> >> > the boxes are ticked again, I can't seem to get rid of them. I am
> >> > still
> >> > getting messages everytime I come off the internet and sending
> >> > reports
> >> > to
> >> > microsoft. So I don't know what else to do, I will have to wait
> >> > for
> >> > your
> >> > reply as I don't want to fiddle too much as I broke my last
> >> > computer.
> >> > Hope
> >> > to hear from you soon, Thank you.
> >> > --
> >> > Glo
> >> >
> >> >
> >> > "Gerry Cornell" wrote:
> >> >
> >> >> Glo
> >> >>
> >> >>
> >> >> I now need copies of those Error Reports in Event Viewer on
> >> >> Application
> >> >> and System tab for the last 2 days. Post only copies of Reports
> >> >> where
> >> >> the Event Type = Error.
> >> >>
> >> >> You can access Event Viewer by selecting Start, Administrative
> >> >> Tools,
> >> >> Event Viewer.
> >> >> When researching the meaning of the error, information regarding
> >> >> Event
> >> >> ID, Source
> >> >> and Description are important.
> >> >>
> >> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
> >> >> http://support.microsoft.com/default...&Product=winxp
> >> >>
> >> >> A tip for posting copies of Error Reports! Run Event Viewer and
> >> >> double
> >> >> click on the
> >> >> error you want to copy. In the window, which appears is a button
> >> >> resembling two
> >> >> pages. Double click the button and close Event Viewer. Now start
> >> >> your
> >> >> message
> >> >> (email) and do a paste into the body of the message. This will
> >> >> paste
> >> >> the
> >> >> info from the
> >> >> Event Viewer Error Report complete with links into the message.
> >> >> Make
> >> >> sure this is
> >> >> the first paste after exiting from Event Viewer.
> >> >>
> >> >> BTW in what country do you live?
> >> >>
> >> >>
> >> >> --
> >> >>
> >> >>
> >> >> Hope this helps.
> >> >>
> >> >> Gerry
> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> FCA
> >> >>
> >> >> Using invalid email address
> >> >>
> >> >> Stourport, Worcs, England
> >> >> Enquire, plan and execute.
> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> Please tell the newsgroup how any
> >> >> suggested solution worked for you.
> >> >>
> >> >> http://dts-l.org/goodpost.htm
> >> >>
> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >>
> >> >> "Glo" <glo@discussions.microsoft.com> wrote in message
> >> >> news:98DF935E-6EE2-4AF5-87FF-6A883D4A142F@microsoft.com...
> >> >> >I forgot to mention I keep getting error reports that I send off
> >> >> >to
> >> >> > microsoft, it seems to be happening alot even when I leave here
> >> >> > and
> >> >> > start
> >> >> > closing the system down, so I don't know if that has something
> >> >> > to
> >> >> > do
> >> >> > with it.
> >> >> > --
> >> >> > Glo
> >> >> >
> >> >> >
> >> >> > "Glo" wrote:
> >> >> >
> >> >> >> Hi
> >> >> >> My computer is a Medion which I bought from PC World about 5
> >> >> >> years
> >> >> >> ago,
> >> >> >> can't remember exactly when. I have a product recovery c.d and
> >> >> >> an
> >> >> >> Application and support C.D. The file system is NTFS and it
> >> >> >> boots
> >> >> >> alright
> >> >> >> and I have not noticed anything wrong or not working. I am
> >> >> >> posting
> >> >> >> from this
> >> >> >> computer as it is the only one I have. A few days ago it was
> >> >> >> fine
> >> >> >> until I
> >> >> >> messed it up trying to put this panda software on from a email
> >> >> >> I
> >> >> >> got
> >> >> >> from
> >> >> >> them, and took off my e-trust. Then I could not connect to the
> >> >> >> internet
> >> >> >> until it took me about 10 hours to work out that my user-name
> >> >> >> was
> >> >> >> not
> >> >> >> correct. That is when these messages started. Thank you for
> >> >> >> explaining how
> >> >> >> to do things you want me to look at otherwise I would not have
> >> >> >> a
> >> >> >> clue. To me
> >> >> >> the computer is like an ocean, it is very large and I will
> >> >> >> never
> >> >> >> know
> >> >> >> all
> >> >> >> about it or remember. I hope you can still help me and if I
> >> >> >> put
> >> >> >> that
> >> >> >> recovery disk in would I loose all my software ect. that I have
> >> >> >> installed?
> >> >> >> Hope to hear from you soon, cheers.
> >> >> >> --
> >> >> >> Glo
> >> >> >>
> >> >> >>
> >> >> >> "Gerry Cornell" wrote:
> >> >> >>
> >> >> >> > What is the make and model of your computer?
> >> >> >> >
> >> >> >> > Do you have a boot disk or Windows XP CD or both?
> >> >> >> >
> >> >> >> > Is the hard drive formatted as FAT32 or NTFS? -In Windows
> >> >> >> > Explorer
> >> >> >> > right
> >> >> >> > click on your C drive and select Properties. You will see the
> >> >> >> > required
> >> >> >> > information after File System.
> >> >> >> >
> >> >> >> > Despite the error messages does the computer boot to the
> >> >> >> > Desktop
> >> >> >> > and do
> >> >> >> > all icons Display?
> >> >> >> >
> >> >> >> > Are you posting from the computer or another computer?
> >> >> >> >
> >> >> >> > What doesn't work?
> >> >> >> >
> >> >> >> > On what date did the computer last boot without any
> >> >> >> > noticeable
> >> >> >> > error?
> >> >> >> >
> >> >> >> > Can you access the Desktop without crashing in Safe Mode?
> >> >> >> >
> >> >> >> > A description of the Safe Mode Boot options in Windows XP
> >> >> >> > http://support.microsoft.com/default...b;en-us;315222
> >> >> >> >
> >> >> >> > --
> >> >> >> >
> >> >> >> >
> >> >> >> > Hope this helps.
> >> >> >> >
> >> >> >> > Gerry
> >> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> > FCA
> >> >> >> >
> >> >> >> > Using invalid email address
> >> >> >> >
> >> >> >> > Stourport, Worcs, England
> >> >> >> > Enquire, plan and execute.
> >> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> > Please tell the newsgroup how any
> >> >> >> > suggested solution worked for you.
> >> >> >> >
> >> >> >> > http://dts-l.org/goodpost.htm
> >> >> >> >
> >> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> >
> >> >> >> > "Glo" <glo@discussions.microsoft.com> wrote in message
> >> >> >> > news:FBF62BDA-6861-440B-8F43-AC7721F3B616@microsoft.com...
> >> >> >> > > Hi

This freeware programme is excellent for getting information about your
computer:
Everest Home Edition (freeware)
http://www.lavalys.hu/index.php

Tip: To copy select Report, Quick Report, Plain Text, highlight required
text, right click and select copy. However, whilst this is fine for
posting small amounts of information into newsgroup messages longer
reports will irritate other newsgroup subscribers.

In Everest place the cursor on Software select Report, Quick Report,
Plain Text, click on Send in Email and change the entry in the To box to
my address, which is given below removing dump from the address.

gcjc@btdumpinternet.com


--


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Using invalid email address

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.

http://dts-l.org/goodpost.htm

~~~~~~~~~~~~~~~~~~~~~~~~




"Glo" <glo@discussions.microsoft.com> wrote in message
news:C6C057DD-92DD-41C9-874F-E2DC07AA7393@microsoft.com...
> Hi
> Do you mean restart computer as normal or do I have to do something to
> stop
> all my programs coming up? I did go to windows update and it said I
> was up to
> date with everything.
> --
> Glo
>
>
> "Gerry Cornell" wrote:
>
>> Glo
>>
>> Before trying again reboot your machine and do not load any
>> programmes
>> e.g. Internet Explorer etc. Then select start, Run, type "regsvr32
>> shodocvw.dll" without the quotes and hit ENTER. Note the time and if
>> it
>> gives a fail message look in Event Viewer for any messages two
>> minutes
>> before and after the error occurred and post a copy here.
>>
>> Where are you with regard to downloading and installing Windows
>> updates?
>>
>> --
>>
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> FCA
>>
>> Using invalid email address
>>
>> Stourport, Worcs, England
>> Enquire, plan and execute.
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> Please tell the newsgroup how any
>> suggested solution worked for you.
>>
>> http://dts-l.org/goodpost.htm
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>>
>>
>> "Glo" <glo@discussions.microsoft.com> wrote in message
>> news:6ABB3103-110E-4EEE-A92A-22264A7E2367@microsoft.com...
>> > Hi
>> > I tried what you stated and when I pressed enter this box came up
>> > saying,
>> > RegSvv32
>> > Yellow triangle LoadLibrary ("shodocvw.dll")failed - The specified
>> > module
>> > could not be found.
>> > Also the error reporting box still comes up everytime I leave the
>> > internet.
>> > I did restart my computer after doing this just in case it would
>> > work,
>> > but
>> > no, it is still the same.
>> > Any other suggestions would be great, Thank you.
>> > --
>> > Glo
>> >
>> >
>> > "Gerry Cornell" wrote:
>> >
>> >> Glo
>> >>
>> >> For the Internet Explorer errors try:
>> >>
>> >> Start, Run, type "regsvr32 shodocvw.dll" without the quotes and
>> >> hit
>> >> ENTER. Check later after surfing whether the Application Errors
>> >> have
>> >> ceased.
>> >>
>> >> You also appear to have encountered problems on 15 November trying
>> >> to
>> >> download the November Critical Updates. I am not sure why but you
>> >> seem
>> >> to have tried to download / install whilst in Safe Mode, which has
>> >> resulted in services needed to execute the update not being
>> >> available.
>> >>
>> >> In normal mode select Start, Help and Support, Keep your computer
>> >> up
>> >> to
>> >> date with Windows Update and then follow the instructions on the
>> >> screen.
>> >>
>> >> --
>> >>
>> >>
>> >> Hope this helps.
>> >>
>> >> Gerry
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> FCA
>> >>
>> >> Using invalid email address
>> >>
>> >> Stourport, Worcs, England
>> >> Enquire, plan and execute.
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> Please tell the newsgroup how any
>> >> suggested solution worked for you.
>> >>
>> >> http://dts-l.org/goodpost.htm
>> >>
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >>
>> >>
>> >> "Glo" <glo@discussions.microsoft.com> wrote in message
>> >> news:1B36B4B9-D910-4B84-9063-9236AC41A7A6@microsoft.com...
>> >> > While waiting for your reply I have tried the following. I did
>> >> > that
>> >> > msconfig
>> >> > in run and went to the start-up and unticked the two lines with
>> >> > the
>> >> > boxes in
>> >> > a rowj. I restarted the computer and the error messages did not
>> >> > appear, but
>> >> > it said about putting back to normal start up. When I do the
>> >> > two
>> >> > lines with
>> >> > the boxes are ticked again, I can't seem to get rid of them. I
>> >> > am
>> >> > still
>> >> > getting messages everytime I come off the internet and sending
>> >> > reports
>> >> > to
>> >> > microsoft. So I don't know what else to do, I will have to wait
>> >> > for
>> >> > your
>> >> > reply as I don't want to fiddle too much as I broke my last
>> >> > computer.
>> >> > Hope
>> >> > to hear from you soon, Thank you.
>> >> > --
>> >> > Glo
>> >> >
>> >> >
>> >> > "Gerry Cornell" wrote:
>> >> >
>> >> >> Glo
>> >> >>
>> >> >>
>> >> >> I now need copies of those Error Reports in Event Viewer on
>> >> >> Application
>> >> >> and System tab for the last 2 days. Post only copies of Reports
>> >> >> where
>> >> >> the Event Type = Error.
>> >> >>
>> >> >> You can access Event Viewer by selecting Start, Administrative
>> >> >> Tools,
>> >> >> Event Viewer.
>> >> >> When researching the meaning of the error, information
>> >> >> regarding
>> >> >> Event
>> >> >> ID, Source
>> >> >> and Description are important.
>> >> >>
>> >> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows
>> >> >> XP
>> >> >> http://support.microsoft.com/default...&Product=winxp
>> >> >>
>> >> >> A tip for posting copies of Error Reports! Run Event Viewer and
>> >> >> double
>> >> >> click on the
>> >> >> error you want to copy. In the window, which appears is a
>> >> >> button
>> >> >> resembling two
>> >> >> pages. Double click the button and close Event Viewer. Now
>> >> >> start
>> >> >> your
>> >> >> message
>> >> >> (email) and do a paste into the body of the message. This will
>> >> >> paste
>> >> >> the
>> >> >> info from the
>> >> >> Event Viewer Error Report complete with links into the message.
>> >> >> Make
>> >> >> sure this is
>> >> >> the first paste after exiting from Event Viewer.
>> >> >>
>> >> >> BTW in what country do you live?
>> >> >>
>> >> >>
>> >> >> --
>> >> >>
>> >> >>
>> >> >> Hope this helps.
>> >> >>
>> >> >> Gerry
>> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> FCA
>> >> >>
>> >> >> Using invalid email address
>> >> >>
>> >> >> Stourport, Worcs, England
>> >> >> Enquire, plan and execute.
>> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> Please tell the newsgroup how any
>> >> >> suggested solution worked for you.
>> >> >>
>> >> >> http://dts-l.org/goodpost.htm
>> >> >>
>> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >>
>> >> >> "Glo" <glo@discussions.microsoft.com> wrote in message
>> >> >> news:98DF935E-6EE2-4AF5-87FF-6A883D4A142F@microsoft.com...
>> >> >> >I forgot to mention I keep getting error reports that I send
>> >> >> >off
>> >> >> >to
>> >> >> > microsoft, it seems to be happening alot even when I leave
>> >> >> > here
>> >> >> > and
>> >> >> > start
>> >> >> > closing the system down, so I don't know if that has
>> >> >> > something
>> >> >> > to
>> >> >> > do
>> >> >> > with it.
>> >> >> > --
>> >> >> > Glo
>> >> >> >
>> >> >> >
>> >> >> > "Glo" wrote:
>> >> >> >
>> >> >> >> Hi
>> >> >> >> My computer is a Medion which I bought from PC World about 5
>> >> >> >> years
>> >> >> >> ago,
>> >> >> >> can't remember exactly when. I have a product recovery c.d
>> >> >> >> and
>> >> >> >> an
>> >> >> >> Application and support C.D. The file system is NTFS and it
>> >> >> >> boots
>> >> >> >> alright
>> >> >> >> and I have not noticed anything wrong or not working. I am
>> >> >> >> posting
>> >> >> >> from this
>> >> >> >> computer as it is the only one I have. A few days ago it
>> >> >> >> was
>> >> >> >> fine
>> >> >> >> until I
>> >> >> >> messed it up trying to put this panda software on from a
>> >> >> >> email
>> >> >> >> I
>> >> >> >> got
>> >> >> >> from
>> >> >> >> them, and took off my e-trust. Then I could not connect to
>> >> >> >> the
>> >> >> >> internet
>> >> >> >> until it took me about 10 hours to work out that my
>> >> >> >> user-name
>> >> >> >> was
>> >> >> >> not
>> >> >> >> correct. That is when these messages started. Thank you
>> >> >> >> for
>> >> >> >> explaining how
>> >> >> >> to do things you want me to look at otherwise I would not
>> >> >> >> have
>> >> >> >> a
>> >> >> >> clue. To me
>> >> >> >> the computer is like an ocean, it is very large and I will
>> >> >> >> never
>> >> >> >> know
>> >> >> >> all
>> >> >> >> about it or remember. I hope you can still help me and if I
>> >> >> >> put
>> >> >> >> that
>> >> >> >> recovery disk in would I loose all my software ect. that I
>> >> >> >> have
>> >> >> >> installed?
>> >> >> >> Hope to hear from you soon, cheers.
>> >> >> >> --
>> >> >> >> Glo
>> >> >> >>
>> >> >> >>
>> >> >> >> "Gerry Cornell" wrote:
>> >> >> >>
>> >> >> >> > What is the make and model of your computer?
>> >> >> >> >
>> >> >> >> > Do you have a boot disk or Windows XP CD or both?
>> >> >> >> >
>> >> >> >> > Is the hard drive formatted as FAT32 or NTFS? -In Windows
>> >> >> >> > Explorer
>> >> >> >> > right
>> >> >> >> > click on your C drive and select Properties. You will see
>> >> >> >> > the
>> >> >> >> > required
>> >> >> >> > information after File System.
>> >> >> >> >
>> >> >> >> > Despite the error messages does the computer boot to the
>> >> >> >> > Desktop
>> >> >> >> > and do
>> >> >> >> > all icons Display?
>> >> >> >> >
>> >> >> >> > Are you posting from the computer or another computer?
>> >> >> >> >
>> >> >> >> > What doesn't work?
>> >> >> >> >
>> >> >> >> > On what date did the computer last boot without any
>> >> >> >> > noticeable
>> >> >> >> > error?
>> >> >> >> >
>> >> >> >> > Can you access the Desktop without crashing in Safe Mode?
>> >> >> >> >
>> >> >> >> > A description of the Safe Mode Boot options in Windows XP
>> >> >> >> > http://support.microsoft.com/default...b;en-us;315222
>> >> >> >> >
>> >> >> >> > --
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > Hope this helps.
>> >> >> >> >
>> >> >> >> > Gerry
>> >> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> > FCA
>> >> >> >> >
>> >> >> >> > Using invalid email address
>> >> >> >> >
>> >> >> >> > Stourport, Worcs, England
>> >> >> >> > Enquire, plan and execute.
>> >> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> > Please tell the newsgroup how any
>> >> >> >> > suggested solution worked for you.
>> >> >> >> >
>> >> >> >> > http://dts-l.org/goodpost.htm
>> >> >> >> >
>> >> >> >> > ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> >
>> >> >> >> > "Glo" <glo@discussions.microsoft.com> wrote in message
>> >> >> >> > news:FBF62BDA-6861-440B-8F43-AC7721F3B616@microsoft.com...
>> >> >> >> > > Hi

This site may be able to help.
medion support forum
http://medion.adslweb.co.uk

Help whom and how? Looks to me to be off topic!


--


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Using invalid email address

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.

http://dts-l.org/goodpost.htm

~~~~~~~~~~~~~~~~~~~~~~~~

<jerryyang_la1@yahoo.com> wrote in message
news:1132576614.692222.42010@g47g2000cwa.googlegro ups.com...
> This site may be able to help.
> medion support forum
> http://medion.adslweb.co.uk
>

Hi Gerry
I sent a email to Medion, waiting for a reply, I thought you sent the
message until I looked a while ago and realised it was from someone else, I
thought you must have had enough with this Anyway I went into that msconfig
again and left all the ticks except Load start-up items and the error
messages don't appear. Could I leave the machine as it is in selective start
up or will I have some errors somewhere else? Did you find any faults from
the information I emailed to you?
Cheers
--
Glo


"Gerry Cornell" wrote:

> Help whom and how? Looks to me to be off topic!
>
>
> --
>
>
> Hope this helps.
>
> Gerry
> ~~~~~~~~~~~~~~~~~~~~~~~~
> FCA
>
> Using invalid email address
>
> Stourport, Worcs, England
> Enquire, plan and execute.
> ~~~~~~~~~~~~~~~~~~~~~~~~
> Please tell the newsgroup how any
> suggested solution worked for you.
>
> http://dts-l.org/goodpost.htm
>
> ~~~~~~~~~~~~~~~~~~~~~~~~
>
> <jerryyang_la1@yahoo.com> wrote in message
> news:1132576614.692222.42010@g47g2000cwa.googlegro ups.com...
> > This site may be able to help.
> > medion support forum
> > http://medion.adslweb.co.uk
> >
>
>

Glo

No. Still interested. I was waiting to hear from you. Your email did not
arrive. Try sending again taking care to remove dump from the address I
gave you.

Your discovery using a Selective StartUp is interesting. Below is a
Microsoft Knowledge Base Article about using msconfig to Troubleshoot.
In essence now you have what boots with no problems starting adding
items back one at a time rebooting each time you add one back. You will
reach a point where the problem reappears and know then which item
causes problems. Uncheck that item and continue adding items one by one
rebooting after each addition to see whether you have any items causing
problems.

When you have isolated the problem item come back here.

How to perform a clean boot in Windows XP
http://support.microsoft.com/default...b;en-us;310353

It is not a good idea to run a computer on a selective boot setting.

I looked Medion and my reaction was that it was someone with an interest
in the web site on a membership recruitment drive.

--


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Using invalid email address

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.

http://dts-l.org/goodpost.htm

~~~~~~~~~~~~~~~~~~~~~~~~


"Glo" <glo@discussions.microsoft.com> wrote in message
news:EE93C51A-1C32-42D0-A3F7-9159C2007559@microsoft.com...
> Hi Gerry
> I sent a email to Medion, waiting for a reply, I thought you sent the
> message until I looked a while ago and realised it was from someone
> else, I
> thought you must have had enough with this Anyway I went into that
> msconfig
> again and left all the ticks except Load start-up items and the error
> messages don't appear. Could I leave the machine as it is in
> selective start
> up or will I have some errors somewhere else? Did you find any faults
> from
> the information I emailed to you?
> Cheers
> --
> Glo
>
>
> "Gerry Cornell" wrote:
>
>> Help whom and how? Looks to me to be off topic!
>>
>>
>> --
>>
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> FCA
>>
>> Using invalid email address
>>
>> Stourport, Worcs, England
>> Enquire, plan and execute.
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> Please tell the newsgroup how any
>> suggested solution worked for you.
>>
>> http://dts-l.org/goodpost.htm
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> <jerryyang_la1@yahoo.com> wrote in message
>> news:1132576614.692222.42010@g47g2000cwa.googlegro ups.com...
>> > This site may be able to help.
>> > medion support forum
>> > http://medion.adslweb.co.uk
>> >
>>
>>

Hi Gerry
I have just emailed you the report you wanted, let me know if you got it. I
started doing that selective start up and when I put ctfmon back on the box
came up at start up to put it all back to normal start up. Then when I tried
adding the next one, which was one of those lines with the boxed, two error
messages came up like before. So I put it back to normal start up and the 4
error messages appear as before. So how can I delete them? Also I still get
error sending messages evertime I leave the internet which once or twice
gives me a quick view of a solution but goes off screen before I can do
anything. I keep sending them to microsoft but I am just going in circles.
I hope the email helps you to find the problem, hope to hear from you soon.
--
Glo


"Gerry Cornell" wrote:

> Glo
>
> No. Still interested. I was waiting to hear from you. Your email did not
> arrive. Try sending again taking care to remove dump from the address I
> gave you.
>
> Your discovery using a Selective StartUp is interesting. Below is a
> Microsoft Knowledge Base Article about using msconfig to Troubleshoot.
> In essence now you have what boots with no problems starting adding
> items back one at a time rebooting each time you add one back. You will
> reach a point where the problem reappears and know then which item
> causes problems. Uncheck that item and continue adding items one by one
> rebooting after each addition to see whether you have any items causing
> problems.
>
> When you have isolated the problem item come back here.
>
> How to perform a clean boot in Windows XP
> http://support.microsoft.com/default...b;en-us;310353
>
> It is not a good idea to run a computer on a selective boot setting.
>
> I looked Medion and my reaction was that it was someone with an interest
> in the web site on a membership recruitment drive.
>
> --
>
>
> Hope this helps.
>
> Gerry
> ~~~~~~~~~~~~~~~~~~~~~~~~
> FCA
>
> Using invalid email address
>
> Stourport, Worcs, England
> Enquire, plan and execute.
> ~~~~~~~~~~~~~~~~~~~~~~~~
> Please tell the newsgroup how any
> suggested solution worked for you.
>
> http://dts-l.org/goodpost.htm
>
> ~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> "Glo" <glo@discussions.microsoft.com> wrote in message
> news:EE93C51A-1C32-42D0-A3F7-9159C2007559@microsoft.com...
> > Hi Gerry
> > I sent a email to Medion, waiting for a reply, I thought you sent the
> > message until I looked a while ago and realised it was from someone
> > else, I
> > thought you must have had enough with this Anyway I went into that
> > msconfig
> > again and left all the ticks except Load start-up items and the error
> > messages don't appear. Could I leave the machine as it is in
> > selective start
> > up or will I have some errors somewhere else? Did you find any faults
> > from
> > the information I emailed to you?
> > Cheers
> > --
> > Glo
> >
> >
> > "Gerry Cornell" wrote:
> >
> >> Help whom and how? Looks to me to be off topic!
> >>
> >>
> >> --
> >>
> >>
> >> Hope this helps.
> >>
> >> Gerry
> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> FCA
> >>
> >> Using invalid email address
> >>
> >> Stourport, Worcs, England
> >> Enquire, plan and execute.
> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> Please tell the newsgroup how any
> >> suggested solution worked for you.
> >>
> >> http://dts-l.org/goodpost.htm
> >>
> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >>
> >> <jerryyang_la1@yahoo.com> wrote in message
> >> news:1132576614.692222.42010@g47g2000cwa.googlegro ups.com...
> >> > This site may be able to help.
> >> > medion support forum
> >> > http://medion.adslweb.co.uk
> >> >
> >>
> >>
>
>

Glo

What is the name of the item you added backed which generated the
errors?

Can you see the messages in the boxed, two error messages? If yes what
do they say?

Look in Event Viewer for the Error Reports ( System tab ) at the date
and time they last occurred.

Don't be fussy over a minute or two but ignore any messages from before
you restarted. Please post a copy here You can access Event Viewer by
selecting Start, Administrative Tools, Event Viewer. When researching
the
meaning of the error, information regarding Event ID, Source and
Description are important.

HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/default...&Product=winxp

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Double click the button and close Event
Viewer. Now start your message(email) and do a paste into the body of
the
message. This will paste the info from the Event Viewer Error Report
complete with links into the message. Make sure this is the first paste
after
exiting from Event Viewer.


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Using invalid email address

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.

http://dts-l.org/goodpost.htm

~~~~~~~~~~~~~~~~~~~~~~~~


"Glo" <glo@discussions.microsoft.com> wrote in message
news:C9F7E14A-83A2-4709-90B3-E5AECA54F044@microsoft.com...
> Hi Gerry
> I have just emailed you the report you wanted, let me know if you got
> it. I
> started doing that selective start up and when I put ctfmon back on
> the box
> came up at start up to put it all back to normal start up. Then when
> I tried
> adding the next one, which was one of those lines with the boxed, two
> error
> messages came up like before. So I put it back to normal start up and
> the 4
> error messages appear as before. So how can I delete them? Also I
> still get
> error sending messages evertime I leave the internet which once or
> twice
> gives me a quick view of a solution but goes off screen before I can
> do
> anything. I keep sending them to microsoft but I am just going in
> circles.
> I hope the email helps you to find the problem, hope to hear from you
> soon.
> --
> Glo
>
>
> "Gerry Cornell" wrote:
>
>> Glo
>>
>> No. Still interested. I was waiting to hear from you. Your email did
>> not
>> arrive. Try sending again taking care to remove dump from the address
>> I
>> gave you.
>>
>> Your discovery using a Selective StartUp is interesting. Below is a
>> Microsoft Knowledge Base Article about using msconfig to
>> Troubleshoot.
>> In essence now you have what boots with no problems starting adding
>> items back one at a time rebooting each time you add one back. You
>> will
>> reach a point where the problem reappears and know then which item
>> causes problems. Uncheck that item and continue adding items one by
>> one
>> rebooting after each addition to see whether you have any items
>> causing
>> problems.
>>
>> When you have isolated the problem item come back here.
>>
>> How to perform a clean boot in Windows XP
>> http://support.microsoft.com/default...b;en-us;310353
>>
>> It is not a good idea to run a computer on a selective boot setting.
>>
>> I looked Medion and my reaction was that it was someone with an
>> interest
>> in the web site on a membership recruitment drive.
>>
>> --
>>
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> FCA
>>
>> Using invalid email address
>>
>> Stourport, Worcs, England
>> Enquire, plan and execute.
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>> Please tell the newsgroup how any
>> suggested solution worked for you.
>>
>> http://dts-l.org/goodpost.htm
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>>
>>
>> "Glo" <glo@discussions.microsoft.com> wrote in message
>> news:EE93C51A-1C32-42D0-A3F7-9159C2007559@microsoft.com...
>> > Hi Gerry
>> > I sent a email to Medion, waiting for a reply, I thought you sent
>> > the
>> > message until I looked a while ago and realised it was from someone
>> > else, I
>> > thought you must have had enough with this Anyway I went into that
>> > msconfig
>> > again and left all the ticks except Load start-up items and the
>> > error
>> > messages don't appear. Could I leave the machine as it is in
>> > selective start
>> > up or will I have some errors somewhere else? Did you find any
>> > faults
>> > from
>> > the information I emailed to you?
>> > Cheers
>> > --
>> > Glo
>> >
>> >
>> > "Gerry Cornell" wrote:
>> >
>> >> Help whom and how? Looks to me to be off topic!
>> >>
>> >>
>> >> --
>> >>
>> >>
>> >> Hope this helps.
>> >>
>> >> Gerry
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> FCA
>> >>
>> >> Using invalid email address
>> >>
>> >> Stourport, Worcs, England
>> >> Enquire, plan and execute.
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> Please tell the newsgroup how any
>> >> suggested solution worked for you.
>> >>
>> >> http://dts-l.org/goodpost.htm
>> >>
>> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >>
>> >> <jerryyang_la1@yahoo.com> wrote in message
>> >> news:1132576614.692222.42010@g47g2000cwa.googlegro ups.com...
>> >> > This site may be able to help.
>> >> > medion support forum
>> >> > http://medion.adslweb.co.uk
>> >> >
>> >>
>> >>
>>
>>

I
will include the two messages I receive after the computer starts and the
welcome comes up then the desktop and straight after that the first box
appears. It has five boxes at the left hand side in a straight line and the
message reads. Windows cannot find (it has two boxes in a straight line).
Make sure you typed the name correctly and then try again. To search for a
file, click start button then click search.
The second box reads: Desktop as the title on the left hand side and iis
starts the message with a yellow triangle stating. Could not run or load
then two boxes in a line. specified in the registry. Make sure the file
exits on your computer or remove the reference to it in the registry.
This is the only errors I get except for the error reporting to microsoft
everytime I leave the internet. I hope this helps as I can't find anymore
information.
--
Glo


"