Hi upstage,

Here's an easy method to solve that error:
http://www.kellys-korner-xp.com/xp_m.htm#16bit

If that doesn't correct the issue, try this manual method:

1. Browse to C:\WINDOWS\repair
Right-Click and Copy the file named: autoexec.nt *

2. Browse to C:\WINDOWS\System32
Right-Click in that window to Paste the file
(Answer yes if prompted to replace existing file)


* Note: If the file autoexec.nt doesn't exist on your system
right click the link below and select the "Save Target As.."
option to save the file in C:\WINDOWS\System32
http://mvps.org/nibblesnbits/AUTOEXEC.NT

--
Cheers, *Windows_XP_MVP_Shell/User*
Jimmy S. http://mvp.support.microsoft.com

Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
My advice is donated "AS IS" without warranty; nor do I confer any rights.
__________________________________________________ _______


upstage Wrote:
=================
| HI
| Thanks for ur patience have tried the certificate thingy thats OK but
| Um it gets worse
| When i type cmd in the run box I get the following error message
| c:\WINDOWS\System32\cmd.com
| c:\WINDOWS\SYSTEM32\AUTOEXE.NT. The systemfile is not suitable for running
| MS-DOS and Microsoft Windows applications. Choose 'close' to terminate the
| application.
| Same thing applies if i type regedit as well
| Regards Mike
|
|
|
|| Hi upstage,
||
|| Have you tried the other steps suggested in my post? :-)
||
|| upstage Wrote:
|| =================
||| Hi
||| Have downloaded the latest DirectX 9 from Microsoft web site
||| But i still cant install it the message appears on screen
||| A cabinet file necessary for installation cannot be trusted please verify
||| the Cryptographic Services are enabled and the cabinet file certificate is
||| valid.
||| Cryptographic Services definately r so i assume its the cabinet file
||| certificate but i'm at a lost as to what to do next
||| Thanking u in anticipation
|||
|||| Hi upstage,
||||
|||| Here are a few solutions for the DirectX 9 "Logo Testing" error,
|||| as well as other errors when trying to install patches or updates:
||||
|||| Here's a quick solution to try before reading through the other steps:
|||| 1.. Start the Administrative Tools utility in Control Panel.
|||| 2.. Double-click Services.
|||| 3.. Right-click Cryptographic Services, and then click Properties.
|||| 4.. Click Automatic for Startup type, and then click Start.
||||
|||| If that doesn't work, then grab a soda and get ready for some fun. ;-)
||||
|||| 1. Try the resolutions in this recently released MS article:
|||| http://support.microsoft.com/default.aspx?kbid=822798
||||
|||| 2. Save and then Open the "DX9 Logo Error" patch on Line 189
|||| for WinXP at: http://www.kellys-korner-xp.com/xp_tweaks.htm
||||
|||| 3. Repairing Windows is our final option. Boot from your Windows
|||| CD (you may have to press F12 while starting up, or change the
|||| bootup order in your BIOS) and then follow the instructions at:
|||| http://michaelstevenstech.com/XPrepairinstall.htm Good luck! :-)
||||
||||
|||| --
|||| Cheers, *Windows_XP_MVP_Shell/User*
|||| Jimmy S. http://mvp.support.microsoft.com
||||
|||| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
|||| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
|||| My advice is donated "AS IS" without warranty; nor do I confer any rights.
|||| __________________________________________________ _______
||||
||||
|||| upstage Wrote:
|||| =================
||||| Tried to install Callof Duty 2 but the Direct 9 wont install. A message comes
||||| up which says A cabinet cannot be trusted and the INstallation fails
||||| Any ideas greatfully received

HI
Things just get worse well now i`ve reinstalled the missing files (i think)
i now get another error when i run cmd which goes like this
The NTVDM CPU has encountered an illegal instruction.
CS:0f47 IP:fffd OP:0f 00 00 00 00
Arghh!!!
regedit does the same
--
mt


"Jimmy S." wrote:

> Hi upstage,
>
> Here's an easy method to solve that error:
> http://www.kellys-korner-xp.com/xp_m.htm#16bit
>
> If that doesn't correct the issue, try this manual method:
>
> 1. Browse to C:\WINDOWS\repair
> Right-Click and Copy the file named: autoexec.nt *
>
> 2. Browse to C:\WINDOWS\System32
> Right-Click in that window to Paste the file
> (Answer yes if prompted to replace existing file)
>
>
> * Note: If the file autoexec.nt doesn't exist on your system
> right click the link below and select the "Save Target As.."
> option to save the file in C:\WINDOWS\System32
> http://mvps.org/nibblesnbits/AUTOEXEC.NT
>
> --
> Cheers, *Windows_XP_MVP_Shell/User*
> Jimmy S. http://mvp.support.microsoft.com
>
> Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
> MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
> My advice is donated "AS IS" without warranty; nor do I confer any rights.
> __________________________________________________ _______
>
>
> upstage Wrote:
> =================
> | HI
> | Thanks for ur patience have tried the certificate thingy thats OK but
> | Um it gets worse
> | When i type cmd in the run box I get the following error message
> | c:\WINDOWS\System32\cmd.com
> | c:\WINDOWS\SYSTEM32\AUTOEXE.NT. The systemfile is not suitable for running
> | MS-DOS and Microsoft Windows applications. Choose 'close' to terminate the
> | application.
> | Same thing applies if i type regedit as well
> | Regards Mike
> |
> |
> |
> || Hi upstage,
> ||
> || Have you tried the other steps suggested in my post? :-)
> ||
> || upstage Wrote:
> || =================
> ||| Hi
> ||| Have downloaded the latest DirectX 9 from Microsoft web site
> ||| But i still cant install it the message appears on screen
> ||| A cabinet file necessary for installation cannot be trusted please verify
> ||| the Cryptographic Services are enabled and the cabinet file certificate is
> ||| valid.
> ||| Cryptographic Services definately r so i assume its the cabinet file
> ||| certificate but i'm at a lost as to what to do next
> ||| Thanking u in anticipation
> |||
> |||| Hi upstage,
> ||||
> |||| Here are a few solutions for the DirectX 9 "Logo Testing" error,
> |||| as well as other errors when trying to install patches or updates:
> ||||
> |||| Here's a quick solution to try before reading through the other steps:
> |||| 1.. Start the Administrative Tools utility in Control Panel.
> |||| 2.. Double-click Services.
> |||| 3.. Right-click Cryptographic Services, and then click Properties.
> |||| 4.. Click Automatic for Startup type, and then click Start.
> ||||
> |||| If that doesn't work, then grab a soda and get ready for some fun. ;-)
> ||||
> |||| 1. Try the resolutions in this recently released MS article:
> |||| http://support.microsoft.com/default.aspx?kbid=822798
> ||||
> |||| 2. Save and then Open the "DX9 Logo Error" patch on Line 189
> |||| for WinXP at: http://www.kellys-korner-xp.com/xp_tweaks.htm
> ||||
> |||| 3. Repairing Windows is our final option. Boot from your Windows
> |||| CD (you may have to press F12 while starting up, or change the
> |||| bootup order in your BIOS) and then follow the instructions at:
> |||| http://michaelstevenstech.com/XPrepairinstall.htm Good luck! :-)
> ||||
> ||||
> |||| --
> |||| Cheers, *Windows_XP_MVP_Shell/User*
> |||| Jimmy S. http://mvp.support.microsoft.com
> ||||
> |||| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
> |||| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
> |||| My advice is donated "AS IS" without warranty; nor do I confer any rights.
> |||| __________________________________________________ _______
> ||||
> ||||
> |||| upstage Wrote:
> |||| =================
> ||||| Tried to install Callof Duty 2 but the Direct 9 wont install. A message comes
> ||||| up which says A cabinet cannot be trusted and the INstallation fails
> ||||| Any ideas greatfully received
>
>
>

Hi upstage,

You could have been infected by Spyware or a Virus which has added
regedit.com (not regedit.exe) to your computer as well as other malware.

Run an Antivirus scan, an Antispyware scan and then take a look at:
http://www.webuser.co.uk/forums/show...6/page/vc/vc/1

--
Cheers, *Windows_XP_MVP_Shell/User*
Jimmy S. http://mvp.support.microsoft.com

Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
My advice is donated "AS IS" without warranty; nor do I confer any rights.
__________________________________________________ _______


upstage Wrote:
=================
| HI
| Things just get worse well now i`ve reinstalled the missing files (i think)
| i now get another error when i run cmd which goes like this
| The NTVDM CPU has encountered an illegal instruction.
| CS:0f47 IP:fffd OP:0f 00 00 00 00
| Arghh!!!
| regedit does the same
|
|| Hi upstage,
||
|| Here's an easy method to solve that error:
|| http://www.kellys-korner-xp.com/xp_m.htm#16bit
||
|| If that doesn't correct the issue, try this manual method:
||
|| 1. Browse to C:\WINDOWS\repair
|| Right-Click and Copy the file named: autoexec.nt *
||
|| 2. Browse to C:\WINDOWS\System32
|| Right-Click in that window to Paste the file
|| (Answer yes if prompted to replace existing file)
||
||
|| * Note: If the file autoexec.nt doesn't exist on your system
|| right click the link below and select the "Save Target As.."
|| option to save the file in C:\WINDOWS\System32
|| http://mvps.org/nibblesnbits/AUTOEXEC.NT
||
|| --
|| Cheers, *Windows_XP_MVP_Shell/User*
|| Jimmy S. http://mvp.support.microsoft.com
||
|| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
|| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
|| My advice is donated "AS IS" without warranty; nor do I confer any rights.
|| __________________________________________________ _______
||
||
|| upstage Wrote:
|| =================
||| HI
||| Thanks for ur patience have tried the certificate thingy thats OK but
||| Um it gets worse
||| When i type cmd in the run box I get the following error message
||| c:\WINDOWS\System32\cmd.com
||| c:\WINDOWS\SYSTEM32\AUTOEXE.NT. The systemfile is not suitable for running
||| MS-DOS and Microsoft Windows applications. Choose 'close' to terminate the
||| application.
||| Same thing applies if i type regedit as well
||| Regards Mike
|||
|||
|||
|||| Hi upstage,
||||
|||| Have you tried the other steps suggested in my post? :-)
||||
|||| upstage Wrote:
|||| =================
||||| Hi
||||| Have downloaded the latest DirectX 9 from Microsoft web site
||||| But i still cant install it the message appears on screen
||||| A cabinet file necessary for installation cannot be trusted please verify
||||| the Cryptographic Services are enabled and the cabinet file certificate is
||||| valid.
||||| Cryptographic Services definately r so i assume its the cabinet file
||||| certificate but i'm at a lost as to what to do next
||||| Thanking u in anticipation
|||||
|||||| Hi upstage,
||||||
|||||| Here are a few solutions for the DirectX 9 "Logo Testing" error,
|||||| as well as other errors when trying to install patches or updates:
||||||
|||||| Here's a quick solution to try before reading through the other steps:
|||||| 1.. Start the Administrative Tools utility in Control Panel.
|||||| 2.. Double-click Services.
|||||| 3.. Right-click Cryptographic Services, and then click Properties.
|||||| 4.. Click Automatic for Startup type, and then click Start.
||||||
|||||| If that doesn't work, then grab a soda and get ready for some fun. ;-)
||||||
|||||| 1. Try the resolutions in this recently released MS article:
|||||| http://support.microsoft.com/default.aspx?kbid=822798
||||||
|||||| 2. Save and then Open the "DX9 Logo Error" patch on Line 189
|||||| for WinXP at: http://www.kellys-korner-xp.com/xp_tweaks.htm
||||||
|||||| 3. Repairing Windows is our final option. Boot from your Windows
|||||| CD (you may have to press F12 while starting up, or change the
|||||| bootup order in your BIOS) and then follow the instructions at:
|||||| http://michaelstevenstech.com/XPrepairinstall.htm Good luck! :-)
||||||
||||||
|||||| --
|||||| Cheers, *Windows_XP_MVP_Shell/User*
|||||| Jimmy S. http://mvp.support.microsoft.com
||||||
|||||| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
|||||| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
|||||| My advice is donated "AS IS" without warranty; nor do I confer any rights.
|||||| __________________________________________________ _______
||||||
||||||
|||||| upstage Wrote:
|||||| =================
||||||| Tried to install Callof Duty 2 but the Direct 9 wont install. A message comes
||||||| up which says A cabinet cannot be trusted and the INstallation fails
||||||| Any ideas greatfully received

HI
Thanks for ur patience have tried the certificate thingy thats OK but
Um it gets worse
When i type cmd in the run box I get the following error message
c:\WINDOWS\System32\cmd.com
c:\WINDOWS\SYSTEM32\AUTOEXE.NT. The systemfile is not suitable for running
MS-DOS and Microsoft Windows applications. Choose 'close' to terminate the
application.
Same thing applies if i type regedit as well
Regards Mike


--
mt


"Jimmy S." wrote:

> Hi upstage,
>
> Have you tried the other steps suggested in my post? :-)
>
> upstage Wrote:
> =================
> | Hi
> | Have downloaded the latest DirectX 9 from Microsoft web site
> | But i still cant install it the message appears on screen
> | A cabinet file necessary for installation cannot be trusted please verify
> | the Cryptographic Services are enabled and the cabinet file certificate is
> | valid.
> | Cryptographic Services definately r so i assume its the cabinet file
> | certificate but i'm at a lost as to what to do next
> | Thanking u in anticipation
> |
> || Hi upstage,
> ||
> || Here are a few solutions for the DirectX 9 "Logo Testing" error,
> || as well as other errors when trying to install patches or updates:
> ||
> || Here's a quick solution to try before reading through the other steps:
> || 1.. Start the Administrative Tools utility in Control Panel.
> || 2.. Double-click Services.
> || 3.. Right-click Cryptographic Services, and then click Properties.
> || 4.. Click Automatic for Startup type, and then click Start.
> ||
> || If that doesn't work, then grab a soda and get ready for some fun. ;-)
> ||
> || 1. Try the resolutions in this recently released MS article:
> || http://support.microsoft.com/default.aspx?kbid=822798
> ||
> || 2. Save and then Open the "DX9 Logo Error" patch on Line 189
> || for WinXP at: http://www.kellys-korner-xp.com/xp_tweaks.htm
> ||
> || 3. Repairing Windows is our final option. Boot from your Windows
> || CD (you may have to press F12 while starting up, or change the
> || bootup order in your BIOS) and then follow the instructions at:
> || http://michaelstevenstech.com/XPrepairinstall.htm Good luck! :-)
> ||
> ||
> || --
> || Cheers, *Windows_XP_MVP_Shell/User*
> || Jimmy S. http://mvp.support.microsoft.com
> ||
> || Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
> || MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
> || My advice is donated "AS IS" without warranty; nor do I confer any rights.
> || __________________________________________________ _______
> ||
> ||
> || upstage Wrote:
> || =================
> ||| Tried to install Callof Duty 2 but the Direct 9 wont install. A message comes
> ||| up which says A cabinet cannot be trusted and the INstallation fails
> ||| Any ideas greatfully received
>
>
>

Hi upstage,

Here's an easy method to solve that error:
http://www.kellys-korner-xp.com/xp_m.htm#16bit

If that doesn't correct the issue, try this manual method:

1. Browse to C:\WINDOWS\repair
Right-Click and Copy the file named: autoexec.nt *

2. Browse to C:\WINDOWS\System32
Right-Click in that window to Paste the file
(Answer yes if prompted to replace existing file)


* Note: If the file autoexec.nt doesn't exist on your system
right click the link below and select the "Save Target As.."
option to save the file in C:\WINDOWS\System32
http://mvps.org/nibblesnbits/AUTOEXEC.NT

--
Cheers, *Windows_XP_MVP_Shell/User*
Jimmy S. http://mvp.support.microsoft.com

Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
My advice is donated "AS IS" without warranty; nor do I confer any rights.
__________________________________________________ _______


upstage Wrote:
=================
| HI
| Thanks for ur patience have tried the certificate thingy thats OK but
| Um it gets worse
| When i type cmd in the run box I get the following error message
| c:\WINDOWS\System32\cmd.com
| c:\WINDOWS\SYSTEM32\AUTOEXE.NT. The systemfile is not suitable for running
| MS-DOS and Microsoft Windows applications. Choose 'close' to terminate the
| application.
| Same thing applies if i type regedit as well
| Regards Mike
|
|
|
|| Hi upstage,
||
|| Have you tried the other steps suggested in my post? :-)
||
|| upstage Wrote:
|| =================
||| Hi
||| Have downloaded the latest DirectX 9 from Microsoft web site
||| But i still cant install it the message appears on screen
||| A cabinet file necessary for installation cannot be trusted please verify
||| the Cryptographic Services are enabled and the cabinet file certificate is
||| valid.
||| Cryptographic Services definately r so i assume its the cabinet file
||| certificate but i'm at a lost as to what to do next
||| Thanking u in anticipation
|||
|||| Hi upstage,
||||
|||| Here are a few solutions for the DirectX 9 "Logo Testing" error,
|||| as well as other errors when trying to install patches or updates:
||||
|||| Here's a quick solution to try before reading through the other steps:
|||| 1.. Start the Administrative Tools utility in Control Panel.
|||| 2.. Double-click Services.
|||| 3.. Right-click Cryptographic Services, and then click Properties.
|||| 4.. Click Automatic for Startup type, and then click Start.
||||
|||| If that doesn't work, then grab a soda and get ready for some fun. ;-)
||||
|||| 1. Try the resolutions in this recently released MS article:
|||| http://support.microsoft.com/default.aspx?kbid=822798
||||
|||| 2. Save and then Open the "DX9 Logo Error" patch on Line 189
|||| for WinXP at: http://www.kellys-korner-xp.com/xp_tweaks.htm
||||
|||| 3. Repairing Windows is our final option. Boot from your Windows
|||| CD (you may have to press F12 while starting up, or change the
|||| bootup order in your BIOS) and then follow the instructions at:
|||| http://michaelstevenstech.com/XPrepairinstall.htm Good luck! :-)
||||
||||
|||| --
|||| Cheers, *Windows_XP_MVP_Shell/User*
|||| Jimmy S. http://mvp.support.microsoft.com
||||
|||| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
|||| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
|||| My advice is donated "AS IS" without warranty; nor do I confer any rights.
|||| __________________________________________________ _______
||||
||||
|||| upstage Wrote:
|||| =================
||||| Tried to install Callof Duty 2 but the Direct 9 wont install. A message comes
||||| up which says A cabinet cannot be trusted and the INstallation fails
||||| Any ideas greatfully received

HI
Things just get worse well now i`ve reinstalled the missing files (i think)
i now get another error when i run cmd which goes like this
The NTVDM CPU has encountered an illegal instruction.
CS:0f47 IP:fffd OP:0f 00 00 00 00
Arghh!!!
regedit does the same
--
mt


"Jimmy S." wrote:

> Hi upstage,
>
> Here's an easy method to solve that error:
> http://www.kellys-korner-xp.com/xp_m.htm#16bit
>
> If that doesn't correct the issue, try this manual method:
>
> 1. Browse to C:\WINDOWS\repair
> Right-Click and Copy the file named: autoexec.nt *
>
> 2. Browse to C:\WINDOWS\System32
> Right-Click in that window to Paste the file
> (Answer yes if prompted to replace existing file)
>
>
> * Note: If the file autoexec.nt doesn't exist on your system
> right click the link below and select the "Save Target As.."
> option to save the file in C:\WINDOWS\System32
> http://mvps.org/nibblesnbits/AUTOEXEC.NT
>
> --
> Cheers, *Windows_XP_MVP_Shell/User*
> Jimmy S. http://mvp.support.microsoft.com
>
> Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
> MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
> My advice is donated "AS IS" without warranty; nor do I confer any rights.
> __________________________________________________ _______
>
>
> upstage Wrote:
> =================
> | HI
> | Thanks for ur patience have tried the certificate thingy thats OK but
> | Um it gets worse
> | When i type cmd in the run box I get the following error message
> | c:\WINDOWS\System32\cmd.com
> | c:\WINDOWS\SYSTEM32\AUTOEXE.NT. The systemfile is not suitable for running
> | MS-DOS and Microsoft Windows applications. Choose 'close' to terminate the
> | application.
> | Same thing applies if i type regedit as well
> | Regards Mike
> |
> |
> |
> || Hi upstage,
> ||
> || Have you tried the other steps suggested in my post? :-)
> ||
> || upstage Wrote:
> || =================
> ||| Hi
> ||| Have downloaded the latest DirectX 9 from Microsoft web site
> ||| But i still cant install it the message appears on screen
> ||| A cabinet file necessary for installation cannot be trusted please verify
> ||| the Cryptographic Services are enabled and the cabinet file certificate is
> ||| valid.
> ||| Cryptographic Services definately r so i assume its the cabinet file
> ||| certificate but i'm at a lost as to what to do next
> ||| Thanking u in anticipation
> |||
> |||| Hi upstage,
> ||||
> |||| Here are a few solutions for the DirectX 9 "Logo Testing" error,
> |||| as well as other errors when trying to install patches or updates:
> ||||
> |||| Here's a quick solution to try before reading through the other steps:
> |||| 1.. Start the Administrative Tools utility in Control Panel.
> |||| 2.. Double-click Services.
> |||| 3.. Right-click Cryptographic Services, and then click Properties.
> |||| 4.. Click Automatic for Startup type, and then click Start.
> ||||
> |||| If that doesn't work, then grab a soda and get ready for some fun. ;-)
> ||||
> |||| 1. Try the resolutions in this recently released MS article:
> |||| http://support.microsoft.com/default.aspx?kbid=822798
> ||||
> |||| 2. Save and then Open the "DX9 Logo Error" patch on Line 189
> |||| for WinXP at: http://www.kellys-korner-xp.com/xp_tweaks.htm
> ||||
> |||| 3. Repairing Windows is our final option. Boot from your Windows
> |||| CD (you may have to press F12 while starting up, or change the
> |||| bootup order in your BIOS) and then follow the instructions at:
> |||| http://michaelstevenstech.com/XPrepairinstall.htm Good luck! :-)
> ||||
> ||||
> |||| --
> |||| Cheers, *Windows_XP_MVP_Shell/User*
> |||| Jimmy S. http://mvp.support.microsoft.com
> ||||
> |||| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
> |||| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
> |||| My advice is donated "AS IS" without warranty; nor do I confer any rights.
> |||| __________________________________________________ _______
> ||||
> ||||
> |||| upstage Wrote:
> |||| =================
> ||||| Tried to install Callof Duty 2 but the Direct 9 wont install. A message comes
> ||||| up which says A cabinet cannot be trusted and the INstallation fails
> ||||| Any ideas greatfully received
>
>
>

Hi upstage,

You could have been infected by Spyware or a Virus which has added
regedit.com (not regedit.exe) to your computer as well as other malware.

Run an Antivirus scan, an Antispyware scan and then take a look at:
http://www.webuser.co.uk/forums/show...6/page/vc/vc/1

--
Cheers, *Windows_XP_MVP_Shell/User*
Jimmy S. http://mvp.support.microsoft.com

Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
My advice is donated "AS IS" without warranty; nor do I confer any rights.
__________________________________________________ _______


upstage Wrote:
=================
| HI
| Things just get worse well now i`ve reinstalled the missing files (i think)
| i now get another error when i run cmd which goes like this
| The NTVDM CPU has encountered an illegal instruction.
| CS:0f47 IP:fffd OP:0f 00 00 00 00
| Arghh!!!
| regedit does the same
|
|| Hi upstage,
||
|| Here's an easy method to solve that error:
|| http://www.kellys-korner-xp.com/xp_m.htm#16bit
||
|| If that doesn't correct the issue, try this manual method:
||
|| 1. Browse to C:\WINDOWS\repair
|| Right-Click and Copy the file named: autoexec.nt *
||
|| 2. Browse to C:\WINDOWS\System32
|| Right-Click in that window to Paste the file
|| (Answer yes if prompted to replace existing file)
||
||
|| * Note: If the file autoexec.nt doesn't exist on your system
|| right click the link below and select the "Save Target As.."
|| option to save the file in C:\WINDOWS\System32
|| http://mvps.org/nibblesnbits/AUTOEXEC.NT
||
|| --
|| Cheers, *Windows_XP_MVP_Shell/User*
|| Jimmy S. http://mvp.support.microsoft.com
||
|| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
|| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
|| My advice is donated "AS IS" without warranty; nor do I confer any rights.
|| __________________________________________________ _______
||
||
|| upstage Wrote:
|| =================
||| HI
||| Thanks for ur patience have tried the certificate thingy thats OK but
||| Um it gets worse
||| When i type cmd in the run box I get the following error message
||| c:\WINDOWS\System32\cmd.com
||| c:\WINDOWS\SYSTEM32\AUTOEXE.NT. The systemfile is not suitable for running
||| MS-DOS and Microsoft Windows applications. Choose 'close' to terminate the
||| application.
||| Same thing applies if i type regedit as well
||| Regards Mike
|||
|||
|||
|||| Hi upstage,
||||
|||| Have you tried the other steps suggested in my post? :-)
||||
|||| upstage Wrote:
|||| =================
||||| Hi
||||| Have downloaded the latest DirectX 9 from Microsoft web site
||||| But i still cant install it the message appears on screen
||||| A cabinet file necessary for installation cannot be trusted please verify
||||| the Cryptographic Services are enabled and the cabinet file certificate is
||||| valid.
||||| Cryptographic Services definately r so i assume its the cabinet file
||||| certificate but i'm at a lost as to what to do next
||||| Thanking u in anticipation
|||||
|||||| Hi upstage,
||||||
|||||| Here are a few solutions for the DirectX 9 "Logo Testing" error,
|||||| as well as other errors when trying to install patches or updates:
||||||
|||||| Here's a quick solution to try before reading through the other steps:
|||||| 1.. Start the Administrative Tools utility in Control Panel.
|||||| 2.. Double-click Services.
|||||| 3.. Right-click Cryptographic Services, and then click Properties.
|||||| 4.. Click Automatic for Startup type, and then click Start.
||||||
|||||| If that doesn't work, then grab a soda and get ready for some fun. ;-)
||||||
|||||| 1. Try the resolutions in this recently released MS article:
|||||| http://support.microsoft.com/default.aspx?kbid=822798
||||||
|||||| 2. Save and then Open the "DX9 Logo Error" patch on Line 189
|||||| for WinXP at: http://www.kellys-korner-xp.com/xp_tweaks.htm
||||||
|||||| 3. Repairing Windows is our final option. Boot from your Windows
|||||| CD (you may have to press F12 while starting up, or change the
|||||| bootup order in your BIOS) and then follow the instructions at:
|||||| http://michaelstevenstech.com/XPrepairinstall.htm Good luck! :-)
||||||
||||||
|||||| --
|||||| Cheers, *Windows_XP_MVP_Shell/User*
|||||| Jimmy S. http://mvp.support.microsoft.com
||||||
|||||| Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
|||||| MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
|||||| My advice is donated "AS IS" without warranty; nor do I confer any rights.
|||||| __________________________________________________ _______
||||||
||||||
|||||| upstage Wrote:
|||||| =================
||||||| Tried to install Callof Duty 2 but the Direct 9 wont install. A message comes
||||||| up which says A cabinet cannot be trusted and the INstallation fails
||||||| Any ideas greatfully received