Drivers Won't Install

That's how I've been doing it Gerry. That's how the software prompts you to
do it. It asks you to plug it in after the driver installation.

But that's where the whole thing goes awry. I get that error 80% of the way
through the drive install. After I send the info to Microsoft and the window
closes, the installation continues. Asks me to plug in the device and
doesn't sense it. But then the XP programming takes over when it senses a
new device being plugged in and begins a search for the installation software
which it cannot find every time.

Things that make you go hmmmmmm! LOL! Thanks Gerry!
--
Intermediate Level User


"Gerry Cornell" wrote:

> Jeff
>
> Try installing the software before the hardware.
>
> --
>
> Hope this helps.
>
> Gerry
> ~~~~
> FCA
> Stourport, England
>
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
>
>
> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> news:B09A726B-5C22-4718-9F45-1BA6942483F6@microsoft.com...
> > The model number is DAP-M0004. It is a portable player. The software is
> > to
> > setup the drivers and media center to sync the MP3 player. I believe that
> > the only thing that is not installing is the USB drivers for the player.
> > When I plug it into the USB port, the install software wizard cannot find
> > the
> > correct software to run the device. Even when the CD-ROM containing the
> > drivers is in the drive.
> >
> > ----------------------------
> > Intermediate Level User
> >
> >
> > "Gerry Cornell" wrote:
> >
> >> Jeff
> >>
> >> What Creative Zen Micro MP3 Model number. They seem mainly to be
> >> portable players.
> >>
> >> --
> >>
> >> Hope this helps.
> >>
> >> Gerry
> >> ~~~~
> >> FCA
> >> Stourport, England
> >>
> >> Enquire, plan and execute
> >> ~~~~~~~~~~~~~~~~~~~
> >>
> >>
> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> news:51F4C776-A942-4B38-946E-B6F978C3D36B@microsoft.com...
> >> > Gerry,
> >> >
> >> > I have MSN Messenger 7.0. I saw your post and went ahead with the
> >> > uninstall
> >> > and then tried installing the Creative software again. No Go! Same
> >> > thing!
> >> > At 80% of the driver install, is stops with a Creative Driver Setup
> >> > encountered a problem and needs to close window.
> >> >
> >> > I happen to have a second PC in the office with Windows 98 SE on it. I
> >> > said
> >> > "What the heck", and decided to try the install on that PC. The MP3
> >> > player
> >> > and all related software work flawlessly on it. But...it is just a
> >> > basic
> >> > PC
> >> > that I use to entertain my child with her learning programs and games.
> >> >
> >> > I'm still searching for answers and it doesn't help that it's the
> >> > holiday
> >> > and all the manufacturers are closed. But I do send out a great big
> >> > THANK
> >> > YOU to you for sticking with me on this. Any more ideas are greatly
> >> > appreciated!!!
> >> >
> >> > I'm almost ready to do a Service Pack 2 uninstall but I am just not
> >> > sure
> >> > what it will do to this PC. Service Pack 2 has been on here since it's
> >> > release, and I have had very few problems other than what was stated on
> >> > my
> >> > initial post in this thread.
> >> >
> >> > BTW...My name is Jeff. :-)
> >> > --
> >> > Intermediate Level User
> >> >
> >> >
> >> > "Gerry Cornell" wrote:
> >> >
> >> >> Are you using MSN Messenger?
> >> >>
> >> >> Do the errors disappear if you uninstall MSN Messenger.
> >> >>
> >> >> Alternatively:
> >> >>
> >> >> Posted by "Anonymous" at eventid.net:
> >> >>
> >> >>
> >> >> "Error code: C0000005 - I would get this event on every boot, and like
> >> >> another user who posted here, it was caused by having MSN Messenger
> >> >> 7.5
> >> >> starting automatically when Windows starts. If I run MSN Messenger
> >> >> after
> >> >> the
> >> >> boot has completed (i.e. manually start it), there is no COM error
> >> >> recorded.
> >> >> To disable Messenger from running automatically, open MSN Messenger,
> >> >> and
> >> >> go
> >> >> to Tools -> Options -> General -> and uncheck 'Automatically run
> >> >> Messenger
> >> >> when I log on to Windows'."
> >> >>
> >> >> --
> >> >>
> >> >> Hope this helps.
> >> >>
> >> >> Gerry
> >> >> ~~~~
> >> >> FCA
> >> >> Stourport, England
> >> >>
> >> >> Enquire, plan and execute
> >> >> ~~~~~~~~~~~~~~~~~~~
> >> >>
> >> >>
> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> news:30B7AA72-F268-4E57-95D1-64FCADA452AB@microsoft.com...
> >> >> > Event Type: Error
> >> >> > Event Source: EventSystem
> >> >> > Event Category: (50)
> >> >> > Event ID: 4609
> >> >> > Date: 12/31/2005
> >> >> > Time: 4:34:24 PM
> >> >> > User: N/A
> >> >> > Computer: MEYER
> >> >> > Description:
> >> >> > The COM+ Event System detected a bad return code during its internal
> >> >> > processing. HRESULT was C0000005 from line 44 of
> >> >> > d:\qxp_slp\com\com1x\src\events\tier1\eventsystemo bj.cpp. Please
> >> >> > contact
> >> >> > Microsoft Product Support Services to report this error.
> >> >> >
> >> >> > For more information, see Help and Support Center at
> >> >> > http://go.microsoft.com/fwlink/events.asp.
> >> >> >
> >> >> > --
> >> >> > Intermediate Level User
> >> >> >
> >> >> >
> >> >> > "Gerry Cornell" wrote:
> >> >> >
> >> >> >>
> >> >> >>
> >> >> >> Please look in the System and Application logs in Event Viewer for
> >> >> >> Warning and Error Reports over the last 2 days use and post copies
> >> >> >> here.
> >> >> >>
> >> >> >> You can access Event Viewer by selecting Start, Administrative
> >> >> >> Tools,
> >> >> >> and
> >> >> >> Event Viewer. When researching the meaning of the error,
> >> >> >> information
> >> >> >> regarding Event ID, Source and Description are important.
> >> >> >>
> >> >> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
> >> >> >> http://support.microsoft.com/default...308427&sd=tech
> >> >> >>
> >> >> >> Part of the Description of the error will include a link, which you
> >> >> >> should
> >> >> >> double click for further information. You can copy using copy and
> >> >> >> paste.
> >> >> >> Often the link will, however, say there is no further information.
> >> >> >> http://go.microsoft.com/fw.link/events.asp
> >> >> >> (Please note the hyperlink above is for illustration purposes only)
> >> >> >>
> >> >> >> A tip for posting copies of Error Reports! Run Event Viewer and
> >> >> >> double
> >> >> >> click on the error you want to copy. In the window, which appears
> >> >> >> is a
> >> >> >> button resembling two pages. Double click the button and close
> >> >> >> Event
> >> >> >> Viewer. Now start your message (email) and do a paste into the body
> >> >> >> of the message. This will paste the info from the Event Viewer
> >> >> >> Error
> >> >> >> Report complete with links into the message. Make sure this is the
> >> >> >> first
> >> >> >> paste after exiting from Event Viewer.
> >> >> >>
> >> >> >>
> >> >> >> Hope this helps.
> >> >> >>
> >> >> >> Gerry
> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> FCA
> >> >> >>
> >> >> >> Stourport, Worcs, England
> >> >> >> Enquire, plan and execute.
> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> Please tell the newsgroup how any
> >> >> >> suggested solution worked for you.
> >> >> >>
> >> >> >> http://dts-l.org/goodpost.htm
> >> >> >>
> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >>
> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> >> news:E5049915-3431-4712-A646-6FB424D14F11@microsoft.com...
> >> >> >> >I have been attempting to install a Creative Zen Micro MP3 player
> >> >> >> >and
> >> >> >> >the
> >> >> >> > drivers will not install from the supplied CD-ROM. It gets 80%
> >> >> >> > through
> >> >> >> > the
> >> >> >> > driver installation and I get a pop-up window telling me
> >> >> >> > "Creative
> >> >> >> > Driver
> >> >> >> > Setup has encountered a problem and needs to close. We are sorry
> >> >> >> > for
> >> >> >> > this
> >> >> >> > inconvenience". So I click the button to send it to Microsoft.
> >> >> >> > It
> >> >> >> > continues
> >> >> >> > the installation after the window closes and tells me it has
> >> >> >> > successfully
> >> >> >> > installed. But...it can't find the device when I plug it in as
> >> >> >> > asked!!!
> >> >> >> > I
> >> >> >> > have gone to Creative's web site and downloaded the drivers and
> >> >> >> > after I
> >> >> >> > plug
> >> >> >> > the device in, the Hardware Installation Wizard still cannot find
> >> >> >> > the
> >> >> >> > drivers. I have gone so far as attempting to install after a
> >> >> >> > clean
> >> >> >> > boot
> >> >> >> > with
> >> >> >> > the same results.
> >> >> >> >
> >> >> >> > I have Windows XP Home Edition with SP2 and all current updates
> >> >> >> > on
> >> >> >> > the
> >> >> >> > update website for Microsoft. I'm thinking it is another gremlin
> >> >> >> > of
> >> >> >> > SP2,
> >> >> >> > but
> >> >> >> > I have installed other hardware with no problems. The only other
> >> >> >> > thing
> >> >> >> > that
> >> >> >> > I have noticed since SP2 installation was WMP 10 won't recognize
> >> >> >> > my
> >> >> >> > CD
> >> >> >> > or
> >> >> >> > DVD
> >> >> >> > burner while Sonic RecordNow recognizes both. Wierd!!!
> >> >> >> >
> >> >> >> > Any help would be very much appreciated as Creative has no
> >> >> >> > idea!!!
> >> >> >> > --
> >> >> >> > Intermediate Level User
> >> >> >>
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Jeff

This line leaves me floundering "Things that make you go hmmmmmm! LOL!
Thanks Gerry!"

Have you just discovered the Browse button or decided not to let Microsoft
auto find?

--

Hope this helps.

Gerry
~~~~
FCA
Stourport, England

Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~



"CrazyDaze" <lizsjeff@msn.com> wrote in message
news:22FBA842-8AC3-4852-A370-C5F31335DFD9@microsoft.com...
> That's how I've been doing it Gerry. That's how the software prompts you
> to
> do it. It asks you to plug it in after the driver installation.
>
> But that's where the whole thing goes awry. I get that error 80% of the
> way
> through the drive install. After I send the info to Microsoft and the
> window
> closes, the installation continues. Asks me to plug in the device and
> doesn't sense it. But then the XP programming takes over when it senses a
> new device being plugged in and begins a search for the installation
> software
> which it cannot find every time.
>
> Things that make you go hmmmmmm! LOL! Thanks Gerry!
> --
> Intermediate Level User
>
>
> "Gerry Cornell" wrote:
>
>> Jeff
>>
>> Try installing the software before the hardware.
>>
>> --
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~
>> FCA
>> Stourport, England
>>
>> Enquire, plan and execute
>> ~~~~~~~~~~~~~~~~~~~
>>
>>
>> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> news:B09A726B-5C22-4718-9F45-1BA6942483F6@microsoft.com...
>> > The model number is DAP-M0004. It is a portable player. The software
>> > is
>> > to
>> > setup the drivers and media center to sync the MP3 player. I believe
>> > that
>> > the only thing that is not installing is the USB drivers for the
>> > player.
>> > When I plug it into the USB port, the install software wizard cannot
>> > find
>> > the
>> > correct software to run the device. Even when the CD-ROM containing
>> > the
>> > drivers is in the drive.
>> >
>> > ----------------------------
>> > Intermediate Level User
>> >
>> >
>> > "Gerry Cornell" wrote:
>> >
>> >> Jeff
>> >>
>> >> What Creative Zen Micro MP3 Model number. They seem mainly to be
>> >> portable players.
>> >>
>> >> --
>> >>
>> >> Hope this helps.
>> >>
>> >> Gerry
>> >> ~~~~
>> >> FCA
>> >> Stourport, England
>> >>
>> >> Enquire, plan and execute
>> >> ~~~~~~~~~~~~~~~~~~~
>> >>
>> >>
>> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> >> news:51F4C776-A942-4B38-946E-B6F978C3D36B@microsoft.com...
>> >> > Gerry,
>> >> >
>> >> > I have MSN Messenger 7.0. I saw your post and went ahead with the
>> >> > uninstall
>> >> > and then tried installing the Creative software again. No Go! Same
>> >> > thing!
>> >> > At 80% of the driver install, is stops with a Creative Driver Setup
>> >> > encountered a problem and needs to close window.
>> >> >
>> >> > I happen to have a second PC in the office with Windows 98 SE on it.
>> >> > I
>> >> > said
>> >> > "What the heck", and decided to try the install on that PC. The MP3
>> >> > player
>> >> > and all related software work flawlessly on it. But...it is just a
>> >> > basic
>> >> > PC
>> >> > that I use to entertain my child with her learning programs and
>> >> > games.
>> >> >
>> >> > I'm still searching for answers and it doesn't help that it's the
>> >> > holiday
>> >> > and all the manufacturers are closed. But I do send out a great big
>> >> > THANK
>> >> > YOU to you for sticking with me on this. Any more ideas are greatly
>> >> > appreciated!!!
>> >> >
>> >> > I'm almost ready to do a Service Pack 2 uninstall but I am just not
>> >> > sure
>> >> > what it will do to this PC. Service Pack 2 has been on here since
>> >> > it's
>> >> > release, and I have had very few problems other than what was stated
>> >> > on
>> >> > my
>> >> > initial post in this thread.
>> >> >
>> >> > BTW...My name is Jeff. :-)
>> >> > --
>> >> > Intermediate Level User
>> >> >
>> >> >
>> >> > "Gerry Cornell" wrote:
>> >> >
>> >> >> Are you using MSN Messenger?
>> >> >>
>> >> >> Do the errors disappear if you uninstall MSN Messenger.
>> >> >>
>> >> >> Alternatively:
>> >> >>
>> >> >> Posted by "Anonymous" at eventid.net:
>> >> >>
>> >> >>
>> >> >> "Error code: C0000005 - I would get this event on every boot, and
>> >> >> like
>> >> >> another user who posted here, it was caused by having MSN Messenger
>> >> >> 7.5
>> >> >> starting automatically when Windows starts. If I run MSN Messenger
>> >> >> after
>> >> >> the
>> >> >> boot has completed (i.e. manually start it), there is no COM error
>> >> >> recorded.
>> >> >> To disable Messenger from running automatically, open MSN
>> >> >> Messenger,
>> >> >> and
>> >> >> go
>> >> >> to Tools -> Options -> General -> and uncheck 'Automatically run
>> >> >> Messenger
>> >> >> when I log on to Windows'."
>> >> >>
>> >> >> --
>> >> >>
>> >> >> Hope this helps.
>> >> >>
>> >> >> Gerry
>> >> >> ~~~~
>> >> >> FCA
>> >> >> Stourport, England
>> >> >>
>> >> >> Enquire, plan and execute
>> >> >> ~~~~~~~~~~~~~~~~~~~
>> >> >>
>> >> >>
>> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> >> >> news:30B7AA72-F268-4E57-95D1-64FCADA452AB@microsoft.com...
>> >> >> > Event Type: Error
>> >> >> > Event Source: EventSystem
>> >> >> > Event Category: (50)
>> >> >> > Event ID: 4609
>> >> >> > Date: 12/31/2005
>> >> >> > Time: 4:34:24 PM
>> >> >> > User: N/A
>> >> >> > Computer: MEYER
>> >> >> > Description:
>> >> >> > The COM+ Event System detected a bad return code during its
>> >> >> > internal
>> >> >> > processing. HRESULT was C0000005 from line 44 of
>> >> >> > d:\qxp_slp\com\com1x\src\events\tier1\eventsystemo bj.cpp. Please
>> >> >> > contact
>> >> >> > Microsoft Product Support Services to report this error.
>> >> >> >
>> >> >> > For more information, see Help and Support Center at
>> >> >> > http://go.microsoft.com/fwlink/events.asp.
>> >> >> >
>> >> >> > --
>> >> >> > Intermediate Level User
>> >> >> >
>> >> >> >
>> >> >> > "Gerry Cornell" wrote:
>> >> >> >
>> >> >> >>
>> >> >> >>
>> >> >> >> Please look in the System and Application logs in Event Viewer
>> >> >> >> for
>> >> >> >> Warning and Error Reports over the last 2 days use and post
>> >> >> >> copies
>> >> >> >> here.
>> >> >> >>
>> >> >> >> You can access Event Viewer by selecting Start, Administrative
>> >> >> >> Tools,
>> >> >> >> and
>> >> >> >> Event Viewer. When researching the meaning of the error,
>> >> >> >> information
>> >> >> >> regarding Event ID, Source and Description are important.
>> >> >> >>
>> >> >> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
>> >> >> >> http://support.microsoft.com/default...308427&sd=tech
>> >> >> >>
>> >> >> >> Part of the Description of the error will include a link, which
>> >> >> >> you
>> >> >> >> should
>> >> >> >> double click for further information. You can copy using copy
>> >> >> >> and
>> >> >> >> paste.
>> >> >> >> Often the link will, however, say there is no further
>> >> >> >> information.
>> >> >> >> http://go.microsoft.com/fw.link/events.asp
>> >> >> >> (Please note the hyperlink above is for illustration purposes
>> >> >> >> only)
>> >> >> >>
>> >> >> >> A tip for posting copies of Error Reports! Run Event Viewer and
>> >> >> >> double
>> >> >> >> click on the error you want to copy. In the window, which
>> >> >> >> appears
>> >> >> >> is a
>> >> >> >> button resembling two pages. Double click the button and close
>> >> >> >> Event
>> >> >> >> Viewer. Now start your message (email) and do a paste into the
>> >> >> >> body
>> >> >> >> of the message. This will paste the info from the Event Viewer
>> >> >> >> Error
>> >> >> >> Report complete with links into the message. Make sure this is
>> >> >> >> the
>> >> >> >> first
>> >> >> >> paste after exiting from Event Viewer.
>> >> >> >>
>> >> >> >>
>> >> >> >> Hope this helps.
>> >> >> >>
>> >> >> >> Gerry
>> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> FCA
>> >> >> >>
>> >> >> >> Stourport, Worcs, England
>> >> >> >> Enquire, plan and execute.
>> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> Please tell the newsgroup how any
>> >> >> >> suggested solution worked for you.
>> >> >> >>
>> >> >> >> http://dts-l.org/goodpost.htm
>> >> >> >>
>> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >>
>> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> >> >> >> news:E5049915-3431-4712-A646-6FB424D14F11@microsoft.com...
>> >> >> >> >I have been attempting to install a Creative Zen Micro MP3
>> >> >> >> >player
>> >> >> >> >and
>> >> >> >> >the
>> >> >> >> > drivers will not install from the supplied CD-ROM. It gets
>> >> >> >> > 80%
>> >> >> >> > through
>> >> >> >> > the
>> >> >> >> > driver installation and I get a pop-up window telling me
>> >> >> >> > "Creative
>> >> >> >> > Driver
>> >> >> >> > Setup has encountered a problem and needs to close. We are
>> >> >> >> > sorry
>> >> >> >> > for
>> >> >> >> > this
>> >> >> >> > inconvenience". So I click the button to send it to
>> >> >> >> > Microsoft.
>> >> >> >> > It
>> >> >> >> > continues
>> >> >> >> > the installation after the window closes and tells me it has
>> >> >> >> > successfully
>> >> >> >> > installed. But...it can't find the device when I plug it in
>> >> >> >> > as
>> >> >> >> > asked!!!
>> >> >> >> > I
>> >> >> >> > have gone to Creative's web site and downloaded the drivers
>> >> >> >> > and
>> >> >> >> > after I
>> >> >> >> > plug
>> >> >> >> > the device in, the Hardware Installation Wizard still cannot
>> >> >> >> > find
>> >> >> >> > the
>> >> >> >> > drivers. I have gone so far as attempting to install after a
>> >> >> >> > clean
>> >> >> >> > boot
>> >> >> >> > with
>> >> >> >> > the same results.
>> >> >> >> >
>> >> >> >> > I have Windows XP Home Edition with SP2 and all current
>> >> >> >> > updates
>> >> >> >> > on
>> >> >> >> > the
>> >> >> >> > update website for Microsoft. I'm thinking it is another
>> >> >> >> > gremlin
>> >> >> >> > of
>> >> >> >> > SP2,
>> >> >> >> > but
>> >> >> >> > I have installed other hardware with no problems. The only
>> >> >> >> > other
>> >> >> >> > thing
>> >> >> >> > that
>> >> >> >> > I have noticed since SP2 installation was WMP 10 won't
>> >> >> >> > recognize
>> >> >> >> > my
>> >> >> >> > CD
>> >> >> >> > or
>> >> >> >> > DVD
>> >> >> >> > burner while Sonic RecordNow recognizes both. Wierd!!!
>> >> >> >> >
>> >> >> >> > Any help would be very much appreciated as Creative has no
>> >> >> >> > idea!!!
>> >> >> >> > --
>> >> >> >> > Intermediate Level User
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>

I do the recommended function everytime until it gives me reason not to.
Like in these circumstances. Then I tell it where to go because I know that
it is located there, and it still comes back with an unsuccesful search for
the software.

Sorry for the humor remark, but the only thing I can do short of formatting
and re-installing the OS is laugh about this now. I was told by a separate
source today to do a boot from CD-ROM System Recovery. All of this just for
a dawg gone MP3 Player.

But again...thanks for sticking with me on this! I do appreciate all your
input!!!!
--
Intermediate Level User


"Gerry Cornell" wrote:

> Jeff
>
> This line leaves me floundering "Things that make you go hmmmmmm! LOL!
> Thanks Gerry!"
>
> Have you just discovered the Browse button or decided not to let Microsoft
> auto find?
>
> --
>
> Hope this helps.
>
> Gerry
> ~~~~
> FCA
> Stourport, England
>
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
>
>
>
> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> news:22FBA842-8AC3-4852-A370-C5F31335DFD9@microsoft.com...
> > That's how I've been doing it Gerry. That's how the software prompts you
> > to
> > do it. It asks you to plug it in after the driver installation.
> >
> > But that's where the whole thing goes awry. I get that error 80% of the
> > way
> > through the drive install. After I send the info to Microsoft and the
> > window
> > closes, the installation continues. Asks me to plug in the device and
> > doesn't sense it. But then the XP programming takes over when it senses a
> > new device being plugged in and begins a search for the installation
> > software
> > which it cannot find every time.
> >
> > Things that make you go hmmmmmm! LOL! Thanks Gerry!
> > --
> > Intermediate Level User
> >
> >
> > "Gerry Cornell" wrote:
> >
> >> Jeff
> >>
> >> Try installing the software before the hardware.
> >>
> >> --
> >>
> >> Hope this helps.
> >>
> >> Gerry
> >> ~~~~
> >> FCA
> >> Stourport, England
> >>
> >> Enquire, plan and execute
> >> ~~~~~~~~~~~~~~~~~~~
> >>
> >>
> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> news:B09A726B-5C22-4718-9F45-1BA6942483F6@microsoft.com...
> >> > The model number is DAP-M0004. It is a portable player. The software
> >> > is
> >> > to
> >> > setup the drivers and media center to sync the MP3 player. I believe
> >> > that
> >> > the only thing that is not installing is the USB drivers for the
> >> > player.
> >> > When I plug it into the USB port, the install software wizard cannot
> >> > find
> >> > the
> >> > correct software to run the device. Even when the CD-ROM containing
> >> > the
> >> > drivers is in the drive.
> >> >
> >> > ----------------------------
> >> > Intermediate Level User
> >> >
> >> >
> >> > "Gerry Cornell" wrote:
> >> >
> >> >> Jeff
> >> >>
> >> >> What Creative Zen Micro MP3 Model number. They seem mainly to be
> >> >> portable players.
> >> >>
> >> >> --
> >> >>
> >> >> Hope this helps.
> >> >>
> >> >> Gerry
> >> >> ~~~~
> >> >> FCA
> >> >> Stourport, England
> >> >>
> >> >> Enquire, plan and execute
> >> >> ~~~~~~~~~~~~~~~~~~~
> >> >>
> >> >>
> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> news:51F4C776-A942-4B38-946E-B6F978C3D36B@microsoft.com...
> >> >> > Gerry,
> >> >> >
> >> >> > I have MSN Messenger 7.0. I saw your post and went ahead with the
> >> >> > uninstall
> >> >> > and then tried installing the Creative software again. No Go! Same
> >> >> > thing!
> >> >> > At 80% of the driver install, is stops with a Creative Driver Setup
> >> >> > encountered a problem and needs to close window.
> >> >> >
> >> >> > I happen to have a second PC in the office with Windows 98 SE on it.
> >> >> > I
> >> >> > said
> >> >> > "What the heck", and decided to try the install on that PC. The MP3
> >> >> > player
> >> >> > and all related software work flawlessly on it. But...it is just a
> >> >> > basic
> >> >> > PC
> >> >> > that I use to entertain my child with her learning programs and
> >> >> > games.
> >> >> >
> >> >> > I'm still searching for answers and it doesn't help that it's the
> >> >> > holiday
> >> >> > and all the manufacturers are closed. But I do send out a great big
> >> >> > THANK
> >> >> > YOU to you for sticking with me on this. Any more ideas are greatly
> >> >> > appreciated!!!
> >> >> >
> >> >> > I'm almost ready to do a Service Pack 2 uninstall but I am just not
> >> >> > sure
> >> >> > what it will do to this PC. Service Pack 2 has been on here since
> >> >> > it's
> >> >> > release, and I have had very few problems other than what was stated
> >> >> > on
> >> >> > my
> >> >> > initial post in this thread.
> >> >> >
> >> >> > BTW...My name is Jeff. :-)
> >> >> > --
> >> >> > Intermediate Level User
> >> >> >
> >> >> >
> >> >> > "Gerry Cornell" wrote:
> >> >> >
> >> >> >> Are you using MSN Messenger?
> >> >> >>
> >> >> >> Do the errors disappear if you uninstall MSN Messenger.
> >> >> >>
> >> >> >> Alternatively:
> >> >> >>
> >> >> >> Posted by "Anonymous" at eventid.net:
> >> >> >>
> >> >> >>
> >> >> >> "Error code: C0000005 - I would get this event on every boot, and
> >> >> >> like
> >> >> >> another user who posted here, it was caused by having MSN Messenger
> >> >> >> 7.5
> >> >> >> starting automatically when Windows starts. If I run MSN Messenger
> >> >> >> after
> >> >> >> the
> >> >> >> boot has completed (i.e. manually start it), there is no COM error
> >> >> >> recorded.
> >> >> >> To disable Messenger from running automatically, open MSN
> >> >> >> Messenger,
> >> >> >> and
> >> >> >> go
> >> >> >> to Tools -> Options -> General -> and uncheck 'Automatically run
> >> >> >> Messenger
> >> >> >> when I log on to Windows'."
> >> >> >>
> >> >> >> --
> >> >> >>
> >> >> >> Hope this helps.
> >> >> >>
> >> >> >> Gerry
> >> >> >> ~~~~
> >> >> >> FCA
> >> >> >> Stourport, England
> >> >> >>
> >> >> >> Enquire, plan and execute
> >> >> >> ~~~~~~~~~~~~~~~~~~~
> >> >> >>
> >> >> >>
> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> >> news:30B7AA72-F268-4E57-95D1-64FCADA452AB@microsoft.com...
> >> >> >> > Event Type: Error
> >> >> >> > Event Source: EventSystem
> >> >> >> > Event Category: (50)
> >> >> >> > Event ID: 4609
> >> >> >> > Date: 12/31/2005
> >> >> >> > Time: 4:34:24 PM
> >> >> >> > User: N/A
> >> >> >> > Computer: MEYER
> >> >> >> > Description:
> >> >> >> > The COM+ Event System detected a bad return code during its
> >> >> >> > internal
> >> >> >> > processing. HRESULT was C0000005 from line 44 of
> >> >> >> > d:\qxp_slp\com\com1x\src\events\tier1\eventsystemo bj.cpp. Please
> >> >> >> > contact
> >> >> >> > Microsoft Product Support Services to report this error.
> >> >> >> >
> >> >> >> > For more information, see Help and Support Center at
> >> >> >> > http://go.microsoft.com/fwlink/events.asp.
> >> >> >> >
> >> >> >> > --
> >> >> >> > Intermediate Level User
> >> >> >> >
> >> >> >> >
> >> >> >> > "Gerry Cornell" wrote:
> >> >> >> >
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> Please look in the System and Application logs in Event Viewer
> >> >> >> >> for
> >> >> >> >> Warning and Error Reports over the last 2 days use and post
> >> >> >> >> copies
> >> >> >> >> here.
> >> >> >> >>
> >> >> >> >> You can access Event Viewer by selecting Start, Administrative
> >> >> >> >> Tools,
> >> >> >> >> and
> >> >> >> >> Event Viewer. When researching the meaning of the error,
> >> >> >> >> information
> >> >> >> >> regarding Event ID, Source and Description are important.
> >> >> >> >>
> >> >> >> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
> >> >> >> >> http://support.microsoft.com/default...308427&sd=tech
> >> >> >> >>
> >> >> >> >> Part of the Description of the error will include a link, which
> >> >> >> >> you
> >> >> >> >> should
> >> >> >> >> double click for further information. You can copy using copy
> >> >> >> >> and
> >> >> >> >> paste.
> >> >> >> >> Often the link will, however, say there is no further
> >> >> >> >> information.
> >> >> >> >> http://go.microsoft.com/fw.link/events.asp
> >> >> >> >> (Please note the hyperlink above is for illustration purposes
> >> >> >> >> only)
> >> >> >> >>
> >> >> >> >> A tip for posting copies of Error Reports! Run Event Viewer and
> >> >> >> >> double
> >> >> >> >> click on the error you want to copy. In the window, which
> >> >> >> >> appears
> >> >> >> >> is a
> >> >> >> >> button resembling two pages. Double click the button and close
> >> >> >> >> Event
> >> >> >> >> Viewer. Now start your message (email) and do a paste into the
> >> >> >> >> body
> >> >> >> >> of the message. This will paste the info from the Event Viewer
> >> >> >> >> Error
> >> >> >> >> Report complete with links into the message. Make sure this is
> >> >> >> >> the
> >> >> >> >> first
> >> >> >> >> paste after exiting from Event Viewer.
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> Hope this helps.
> >> >> >> >>
> >> >> >> >> Gerry
> >> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> >> FCA
> >> >> >> >>
> >> >> >> >> Stourport, Worcs, England
> >> >> >> >> Enquire, plan and execute.
> >> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> >> Please tell the newsgroup how any
> >> >> >> >> suggested solution worked for you.
> >> >> >> >>
> >> >> >> >> http://dts-l.org/goodpost.htm
> >> >> >> >>
> >> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
> >> >> >> >>
> >> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> >> >> news:E5049915-3431-4712-A646-6FB424D14F11@microsoft.com...
> >> >> >> >> >I have been attempting to install a Creative Zen Micro MP3
> >> >> >> >> >player
> >> >> >> >> >and
> >> >> >> >> >the
> >> >> >> >> > drivers will not install from the supplied CD-ROM. It gets
> >> >> >> >> > 80%
> >> >> >> >> > through
> >> >> >> >> > the
> >> >> >> >> > driver installation and I get a pop-up window telling me
> >> >> >> >> > "Creative
> >> >> >> >> > Driver
> >> >> >> >> > Setup has encountered a problem and needs to close. We are
> >> >> >> >> > sorry
> >> >> >> >> > for
> >> >> >> >> > this
> >> >> >> >> > inconvenience". So I click the button to send it to
> >> >> >> >> > Microsoft.
> >> >> >> >> > It
> >> >> >> >> > continues
> >> >> >> >> > the installation after the window closes and tells me it has
> >> >> >> >> > successfully
> >> >> >> >> > installed. But...it can't find the device when I plug it in

Jeff

Does the USB port work properly with other devices?

Have you tried another USB port?

What drivers are installed for the USB port?

--

Hope this helps.

Gerry
~~~~
FCA
Stourport, England

Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


"CrazyDaze" <lizsjeff@msn.com> wrote in message
news:7547F1DE-9B8E-413D-BD6B-4A71167DA528@microsoft.com...
>I do the recommended function everytime until it gives me reason not to.
> Like in these circumstances. Then I tell it where to go because I know
> that
> it is located there, and it still comes back with an unsuccesful search
> for
> the software.
>
> Sorry for the humor remark, but the only thing I can do short of
> formatting
> and re-installing the OS is laugh about this now. I was told by a
> separate
> source today to do a boot from CD-ROM System Recovery. All of this just
> for
> a dawg gone MP3 Player.
>
> But again...thanks for sticking with me on this! I do appreciate all your
> input!!!!
> --
> Intermediate Level User
>
>
> "Gerry Cornell" wrote:
>
>> Jeff
>>
>> This line leaves me floundering "Things that make you go hmmmmmm! LOL!
>> Thanks Gerry!"
>>
>> Have you just discovered the Browse button or decided not to let
>> Microsoft
>> auto find?
>>
>> --
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~
>> FCA
>> Stourport, England
>>
>> Enquire, plan and execute
>> ~~~~~~~~~~~~~~~~~~~
>>
>>
>>
>> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> news:22FBA842-8AC3-4852-A370-C5F31335DFD9@microsoft.com...
>> > That's how I've been doing it Gerry. That's how the software prompts
>> > you
>> > to
>> > do it. It asks you to plug it in after the driver installation.
>> >
>> > But that's where the whole thing goes awry. I get that error 80% of
>> > the
>> > way
>> > through the drive install. After I send the info to Microsoft and the
>> > window
>> > closes, the installation continues. Asks me to plug in the device and
>> > doesn't sense it. But then the XP programming takes over when it
>> > senses a
>> > new device being plugged in and begins a search for the installation
>> > software
>> > which it cannot find every time.
>> >
>> > Things that make you go hmmmmmm! LOL! Thanks Gerry!
>> > --
>> > Intermediate Level User
>> >
>> >
>> > "Gerry Cornell" wrote:
>> >
>> >> Jeff
>> >>
>> >> Try installing the software before the hardware.
>> >>
>> >> --
>> >>
>> >> Hope this helps.
>> >>
>> >> Gerry
>> >> ~~~~
>> >> FCA
>> >> Stourport, England
>> >>
>> >> Enquire, plan and execute
>> >> ~~~~~~~~~~~~~~~~~~~
>> >>
>> >>
>> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> >> news:B09A726B-5C22-4718-9F45-1BA6942483F6@microsoft.com...
>> >> > The model number is DAP-M0004. It is a portable player. The
>> >> > software
>> >> > is
>> >> > to
>> >> > setup the drivers and media center to sync the MP3 player. I
>> >> > believe
>> >> > that
>> >> > the only thing that is not installing is the USB drivers for the
>> >> > player.
>> >> > When I plug it into the USB port, the install software wizard cannot
>> >> > find
>> >> > the
>> >> > correct software to run the device. Even when the CD-ROM containing
>> >> > the
>> >> > drivers is in the drive.
>> >> >
>> >> > ----------------------------
>> >> > Intermediate Level User
>> >> >
>> >> >
>> >> > "Gerry Cornell" wrote:
>> >> >
>> >> >> Jeff
>> >> >>
>> >> >> What Creative Zen Micro MP3 Model number. They seem mainly to be
>> >> >> portable players.
>> >> >>
>> >> >> --
>> >> >>
>> >> >> Hope this helps.
>> >> >>
>> >> >> Gerry
>> >> >> ~~~~
>> >> >> FCA
>> >> >> Stourport, England
>> >> >>
>> >> >> Enquire, plan and execute
>> >> >> ~~~~~~~~~~~~~~~~~~~
>> >> >>
>> >> >>
>> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> >> >> news:51F4C776-A942-4B38-946E-B6F978C3D36B@microsoft.com...
>> >> >> > Gerry,
>> >> >> >
>> >> >> > I have MSN Messenger 7.0. I saw your post and went ahead with
>> >> >> > the
>> >> >> > uninstall
>> >> >> > and then tried installing the Creative software again. No Go!
>> >> >> > Same
>> >> >> > thing!
>> >> >> > At 80% of the driver install, is stops with a Creative Driver
>> >> >> > Setup
>> >> >> > encountered a problem and needs to close window.
>> >> >> >
>> >> >> > I happen to have a second PC in the office with Windows 98 SE on
>> >> >> > it.
>> >> >> > I
>> >> >> > said
>> >> >> > "What the heck", and decided to try the install on that PC. The
>> >> >> > MP3
>> >> >> > player
>> >> >> > and all related software work flawlessly on it. But...it is just
>> >> >> > a
>> >> >> > basic
>> >> >> > PC
>> >> >> > that I use to entertain my child with her learning programs and
>> >> >> > games.
>> >> >> >
>> >> >> > I'm still searching for answers and it doesn't help that it's the
>> >> >> > holiday
>> >> >> > and all the manufacturers are closed. But I do send out a great
>> >> >> > big
>> >> >> > THANK
>> >> >> > YOU to you for sticking with me on this. Any more ideas are
>> >> >> > greatly
>> >> >> > appreciated!!!
>> >> >> >
>> >> >> > I'm almost ready to do a Service Pack 2 uninstall but I am just
>> >> >> > not
>> >> >> > sure
>> >> >> > what it will do to this PC. Service Pack 2 has been on here
>> >> >> > since
>> >> >> > it's
>> >> >> > release, and I have had very few problems other than what was
>> >> >> > stated
>> >> >> > on
>> >> >> > my
>> >> >> > initial post in this thread.
>> >> >> >
>> >> >> > BTW...My name is Jeff. :-)
>> >> >> > --
>> >> >> > Intermediate Level User
>> >> >> >
>> >> >> >
>> >> >> > "Gerry Cornell" wrote:
>> >> >> >
>> >> >> >> Are you using MSN Messenger?
>> >> >> >>
>> >> >> >> Do the errors disappear if you uninstall MSN Messenger.
>> >> >> >>
>> >> >> >> Alternatively:
>> >> >> >>
>> >> >> >> Posted by "Anonymous" at eventid.net:
>> >> >> >>
>> >> >> >>
>> >> >> >> "Error code: C0000005 - I would get this event on every boot,
>> >> >> >> and
>> >> >> >> like
>> >> >> >> another user who posted here, it was caused by having MSN
>> >> >> >> Messenger
>> >> >> >> 7.5
>> >> >> >> starting automatically when Windows starts. If I run MSN
>> >> >> >> Messenger
>> >> >> >> after
>> >> >> >> the
>> >> >> >> boot has completed (i.e. manually start it), there is no COM
>> >> >> >> error
>> >> >> >> recorded.
>> >> >> >> To disable Messenger from running automatically, open MSN
>> >> >> >> Messenger,
>> >> >> >> and
>> >> >> >> go
>> >> >> >> to Tools -> Options -> General -> and uncheck 'Automatically run
>> >> >> >> Messenger
>> >> >> >> when I log on to Windows'."
>> >> >> >>
>> >> >> >> --
>> >> >> >>
>> >> >> >> Hope this helps.
>> >> >> >>
>> >> >> >> Gerry
>> >> >> >> ~~~~
>> >> >> >> FCA
>> >> >> >> Stourport, England
>> >> >> >>
>> >> >> >> Enquire, plan and execute
>> >> >> >> ~~~~~~~~~~~~~~~~~~~
>> >> >> >>
>> >> >> >>
>> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> >> >> >> news:30B7AA72-F268-4E57-95D1-64FCADA452AB@microsoft.com...
>> >> >> >> > Event Type: Error
>> >> >> >> > Event Source: EventSystem
>> >> >> >> > Event Category: (50)
>> >> >> >> > Event ID: 4609
>> >> >> >> > Date: 12/31/2005
>> >> >> >> > Time: 4:34:24 PM
>> >> >> >> > User: N/A
>> >> >> >> > Computer: MEYER
>> >> >> >> > Description:
>> >> >> >> > The COM+ Event System detected a bad return code during its
>> >> >> >> > internal
>> >> >> >> > processing. HRESULT was C0000005 from line 44 of
>> >> >> >> > d:\qxp_slp\com\com1x\src\events\tier1\eventsystemo bj.cpp.
>> >> >> >> > Please
>> >> >> >> > contact
>> >> >> >> > Microsoft Product Support Services to report this error.
>> >> >> >> >
>> >> >> >> > For more information, see Help and Support Center at
>> >> >> >> > http://go.microsoft.com/fwlink/events.asp.
>> >> >> >> >
>> >> >> >> > --
>> >> >> >> > Intermediate Level User
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > "Gerry Cornell" wrote:
>> >> >> >> >
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> Please look in the System and Application logs in Event
>> >> >> >> >> Viewer
>> >> >> >> >> for
>> >> >> >> >> Warning and Error Reports over the last 2 days use and post
>> >> >> >> >> copies
>> >> >> >> >> here.
>> >> >> >> >>
>> >> >> >> >> You can access Event Viewer by selecting Start,
>> >> >> >> >> Administrative
>> >> >> >> >> Tools,
>> >> >> >> >> and
>> >> >> >> >> Event Viewer. When researching the meaning of the error,
>> >> >> >> >> information
>> >> >> >> >> regarding Event ID, Source and Description are important.
>> >> >> >> >>
>> >> >> >> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows
>> >> >> >> >> XP
>> >> >> >> >> http://support.microsoft.com/default...308427&sd=tech
>> >> >> >> >>
>> >> >> >> >> Part of the Description of the error will include a link,
>> >> >> >> >> which
>> >> >> >> >> you
>> >> >> >> >> should
>> >> >> >> >> double click for further information. You can copy using copy
>> >> >> >> >> and
>> >> >> >> >> paste.
>> >> >> >> >> Often the link will, however, say there is no further
>> >> >> >> >> information.
>> >> >> >> >> http://go.microsoft.com/fw.link/events.asp
>> >> >> >> >> (Please note the hyperlink above is for illustration purposes
>> >> >> >> >> only)
>> >> >> >> >>
>> >> >> >> >> A tip for posting copies of Error Reports! Run Event Viewer
>> >> >> >> >> and
>> >> >> >> >> double
>> >> >> >> >> click on the error you want to copy. In the window, which
>> >> >> >> >> appears
>> >> >> >> >> is a
>> >> >> >> >> button resembling two pages. Double click the button and
>> >> >> >> >> close
>> >> >> >> >> Event
>> >> >> >> >> Viewer. Now start your message (email) and do a paste into
>> >> >> >> >> the
>> >> >> >> >> body
>> >> >> >> >> of the message. This will paste the info from the Event
>> >> >> >> >> Viewer
>> >> >> >> >> Error
>> >> >> >> >> Report complete with links into the message. Make sure this
>> >> >> >> >> is
>> >> >> >> >> the
>> >> >> >> >> first
>> >> >> >> >> paste after exiting from Event Viewer.
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> Hope this helps.
>> >> >> >> >>
>> >> >> >> >> Gerry
>> >> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> >> FCA
>> >> >> >> >>
>> >> >> >> >> Stourport, Worcs, England
>> >> >> >> >> Enquire, plan and execute.
>> >> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> >> Please tell the newsgroup how any
>> >> >> >> >> suggested solution worked for you.
>> >> >> >> >>
>> >> >> >> >> http://dts-l.org/goodpost.htm
>> >> >> >> >>
>> >> >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~
>> >> >> >> >>
>> >> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
>> >> >> >> >> news:E5049915-3431-4712-A646-6FB424D14F11@microsoft.com...
>> >> >> >> >> >I have been attempting to install a Creative Zen Micro MP3
>> >> >> >> >> >player
>> >> >> >> >> >and
>> >> >> >> >> >the
>> >> >> >> >> > drivers will not install from the supplied CD-ROM. It gets
>> >> >> >> >> > 80%
>> >> >> >> >> > through
>> >> >> >> >> > the
>> >> >> >> >> > driver installation and I get a pop-up window telling me
>> >> >> >> >> > "Creative
>> >> >> >> >> > Driver
>> >> >> >> >> > Setup has encountered a problem and needs to close. We are
>> >> >> >> >> > sorry
>> >> >> >> >> > for
>> >> >> >> >> > this
>> >> >> >> >> > inconvenience". So I click the button to send it to
>> >> >> >> >> > Microsoft.
>> >> >> >> >> > It
>> >> >> >> >> > continues
>> >> >> >> >> > the installation after the window closes and tells me it
>> >> >> >> >> > has
>> >> >> >> >> > successfully
>> >> >> >> >> > installed. But...it can't find the device when I plug it
>> >> >> >> >> > in

Yes...other devices work properly on the USB ports I have been using. I
even went out and bought a new 2.0 USB 4 port PCI card and installed it.
Then went through the entire install process with the same results.

The USB port drivers for the factory installed USB ports are provided by
Microsoft and dated 7/1/2001, version 5.1.2600.0.
--
Intermediate Level User


"Gerry Cornell" wrote:

> Jeff
>
> Does the USB port work properly with other devices?
>
> Have you tried another USB port?
>
> What drivers are installed for the USB port?
>
> --
>
> Hope this helps.
>
> Gerry
> ~~~~
> FCA
> Stourport, England
>
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
>
>
> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> news:7547F1DE-9B8E-413D-BD6B-4A71167DA528@microsoft.com...
> >I do the recommended function everytime until it gives me reason not to.
> > Like in these circumstances. Then I tell it where to go because I know
> > that
> > it is located there, and it still comes back with an unsuccesful search
> > for
> > the software.
> >
> > Sorry for the humor remark, but the only thing I can do short of
> > formatting
> > and re-installing the OS is laugh about this now. I was told by a
> > separate
> > source today to do a boot from CD-ROM System Recovery. All of this just
> > for
> > a dawg gone MP3 Player.
> >
> > But again...thanks for sticking with me on this! I do appreciate all your
> > input!!!!
> > --
> > Intermediate Level User
> >
> >
> > "Gerry Cornell" wrote:
> >
> >> Jeff
> >>
> >> This line leaves me floundering "Things that make you go hmmmmmm! LOL!
> >> Thanks Gerry!"
> >>
> >> Have you just discovered the Browse button or decided not to let
> >> Microsoft
> >> auto find?
> >>
> >> --
> >>
> >> Hope this helps.
> >>
> >> Gerry
> >> ~~~~
> >> FCA
> >> Stourport, England
> >>
> >> Enquire, plan and execute
> >> ~~~~~~~~~~~~~~~~~~~
> >>
> >>
> >>
> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> news:22FBA842-8AC3-4852-A370-C5F31335DFD9@microsoft.com...
> >> > That's how I've been doing it Gerry. That's how the software prompts
> >> > you
> >> > to
> >> > do it. It asks you to plug it in after the driver installation.
> >> >
> >> > But that's where the whole thing goes awry. I get that error 80% of
> >> > the
> >> > way
> >> > through the drive install. After I send the info to Microsoft and the
> >> > window
> >> > closes, the installation continues. Asks me to plug in the device and
> >> > doesn't sense it. But then the XP programming takes over when it
> >> > senses a
> >> > new device being plugged in and begins a search for the installation
> >> > software
> >> > which it cannot find every time.
> >> >
> >> > Things that make you go hmmmmmm! LOL! Thanks Gerry!
> >> > --
> >> > Intermediate Level User
> >> >
> >> >
> >> > "Gerry Cornell" wrote:
> >> >
> >> >> Jeff
> >> >>
> >> >> Try installing the software before the hardware.
> >> >>
> >> >> --
> >> >>
> >> >> Hope this helps.
> >> >>
> >> >> Gerry
> >> >> ~~~~
> >> >> FCA
> >> >> Stourport, England
> >> >>
> >> >> Enquire, plan and execute
> >> >> ~~~~~~~~~~~~~~~~~~~
> >> >>
> >> >>
> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> news:B09A726B-5C22-4718-9F45-1BA6942483F6@microsoft.com...
> >> >> > The model number is DAP-M0004. It is a portable player. The
> >> >> > software
> >> >> > is
> >> >> > to
> >> >> > setup the drivers and media center to sync the MP3 player. I
> >> >> > believe
> >> >> > that
> >> >> > the only thing that is not installing is the USB drivers for the
> >> >> > player.
> >> >> > When I plug it into the USB port, the install software wizard cannot
> >> >> > find
> >> >> > the
> >> >> > correct software to run the device. Even when the CD-ROM containing
> >> >> > the
> >> >> > drivers is in the drive.
> >> >> >
> >> >> > ----------------------------
> >> >> > Intermediate Level User
> >> >> >
> >> >> >
> >> >> > "Gerry Cornell" wrote:
> >> >> >
> >> >> >> Jeff
> >> >> >>
> >> >> >> What Creative Zen Micro MP3 Model number. They seem mainly to be
> >> >> >> portable players.
> >> >> >>
> >> >> >> --
> >> >> >>
> >> >> >> Hope this helps.
> >> >> >>
> >> >> >> Gerry
> >> >> >> ~~~~
> >> >> >> FCA
> >> >> >> Stourport, England
> >> >> >>
> >> >> >> Enquire, plan and execute
> >> >> >> ~~~~~~~~~~~~~~~~~~~
> >> >> >>
> >> >> >>
> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> >> news:51F4C776-A942-4B38-946E-B6F978C3D36B@microsoft.com...
> >> >> >> > Gerry,
> >> >> >> >
> >> >> >> > I have MSN Messenger 7.0. I saw your post and went ahead with
> >> >> >> > the
> >> >> >> > uninstall
> >> >> >> > and then tried installing the Creative software again. No Go!
> >> >> >> > Same
> >> >> >> > thing!
> >> >> >> > At 80% of the driver install, is stops with a Creative Driver
> >> >> >> > Setup
> >> >> >> > encountered a problem and needs to close window.
> >> >> >> >
> >> >> >> > I happen to have a second PC in the office with Windows 98 SE on
> >> >> >> > it.
> >> >> >> > I
> >> >> >> > said
> >> >> >> > "What the heck", and decided to try the install on that PC. The
> >> >> >> > MP3
> >> >> >> > player
> >> >> >> > and all related software work flawlessly on it. But...it is just
> >> >> >> > a
> >> >> >> > basic
> >> >> >> > PC
> >> >> >> > that I use to entertain my child with her learning programs and
> >> >> >> > games.
> >> >> >> >
> >> >> >> > I'm still searching for answers and it doesn't help that it's the
> >> >> >> > holiday
> >> >> >> > and all the manufacturers are closed. But I do send out a great
> >> >> >> > big
> >> >> >> > THANK
> >> >> >> > YOU to you for sticking with me on this. Any more ideas are
> >> >> >> > greatly
> >> >> >> > appreciated!!!
> >> >> >> >
> >> >> >> > I'm almost ready to do a Service Pack 2 uninstall but I am just
> >> >> >> > not
> >> >> >> > sure
> >> >> >> > what it will do to this PC. Service Pack 2 has been on here
> >> >> >> > since
> >> >> >> > it's
> >> >> >> > release, and I have had very few problems other than what was
> >> >> >> > stated
> >> >> >> > on
> >> >> >> > my
> >> >> >> > initial post in this thread.
> >> >> >> >
> >> >> >> > BTW...My name is Jeff. :-)
> >> >> >> > --
> >> >> >> > Intermediate Level User
> >> >> >> >
> >> >> >> >
> >> >> >> > "Gerry Cornell" wrote:
> >> >> >> >
> >> >> >> >> Are you using MSN Messenger?
> >> >> >> >>
> >> >> >> >> Do the errors disappear if you uninstall MSN Messenger.
> >> >> >> >>
> >> >> >> >> Alternatively:
> >> >> >> >>
> >> >> >> >> Posted by "Anonymous" at eventid.net:
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> "Error code: C0000005 - I would get this event on every boot,
> >> >> >> >> and
> >> >> >> >> like
> >> >> >> >> another user who posted here, it was caused by having MSN
> >> >> >> >> Messenger
> >> >> >> >> 7.5
> >> >> >> >> starting automatically when Windows starts. If I run MSN
> >> >> >> >> Messenger
> >> >> >> >> after
> >> >> >> >> the
> >> >> >> >> boot has completed (i.e. manually start it), there is no COM
> >> >> >> >> error
> >> >> >> >> recorded.
> >> >> >> >> To disable Messenger from running automatically, open MSN
> >> >> >> >> Messenger,
> >> >> >> >> and
> >> >> >> >> go
> >> >> >> >> to Tools -> Options -> General -> and uncheck 'Automatically run
> >> >> >> >> Messenger
> >> >> >> >> when I log on to Windows'."
> >> >> >> >>
> >> >> >> >> --
> >> >> >> >>
> >> >> >> >> Hope this helps.
> >> >> >> >>
> >> >> >> >> Gerry
> >> >> >> >> ~~~~
> >> >> >> >> FCA
> >> >> >> >> Stourport, England
> >> >> >> >>
> >> >> >> >> Enquire, plan and execute
> >> >> >> >> ~~~~~~~~~~~~~~~~~~~
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> "CrazyDaze" <lizsjeff@msn.com> wrote in message
> >> >> >> >> news:30B7AA72-F268-4E57-95D1-64FCADA452AB@microsoft.com...
> >> >> >> >> > Event Type: Error
> >> >> >> >> > Event Source: EventSystem
> >> >> >> >> > Event Category: (50)
> >> >> >> >> > Event ID: 4609
> >> >> >> >> > Date: 12/31/2005
> >> >> >> >> > Time: 4:34:24 PM
> >> >> >> >> > User: N/A
> >> >> >> >> > Computer: MEYER
> >> >> >> >> > Description:
> >> >> >> >> > The COM+ Event System detected a bad return code during its
> >> >> >> >> > internal
> >> >> >> >> > processing. HRESULT was C0000005 from line 44 of
> >> >> >> >> > d:\qxp_slp\com\com1x\src\events\tier1\eventsystemo bj.cpp.
> >> >> >> >> > Please
> >> >> >> >> > contact
> >> >> >> >> > Microsoft Product Support Services to report this error.
> >> >> >> >> >
> >> >> >> >> > For more information, see Help and Support Center at
> >> >> >> >> > http://go.microsoft.com/fwlink/events.asp.
> >> >> >> >> >
> >> >> >> >> > --
> >> >> >> >> > Intermediate Level User
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > "Gerry Cornell" wrote:
> >> >> >> >> >
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> Please look in the System and Application logs in Event
> >> >> >> >> >> Viewer
> >> >> >> >> >> for
> >> >> >> >> >> Warning and Error Reports over the last 2 days use and post
> >> >> >> >> >> copies
> >> >> >> >> >> here.
> >> >> >> >> >>
> >> >> >> >> >> You can access Event Viewer by selecting Start,
> >> >> >> >> >> Administrative
> >> >> >> >> >> Tools,
> >> >> >> >> >> and
> >> >> >> >> >> Event Viewer. When researching the meaning of the error,
> >> >> >> >> >> information
> >> >> >> >> >> regarding Event ID, Source and Description are important.
> >> >> >> >> >>
> >> >> >> >> >> HOW TO: View and Manage Event Logs in Event Viewer in Windows
> >> >> >> >> >> XP