Windows Could Not Load the Installer for Display

New System build using Intel D945GNT motherboard since I have an old Windows
XP Pro Disc and Don't have a Disc with SP2 I suspect hardware compatibility
problem, can anyone suggest getting past this error and able to install the
OS for Intel D945 Chipset. I have set up RAID 1 with the Intel Utility and it
seems to work.

Thanks in advance,

The XP PRO disk will work just fine with 945 chip set.Where does the problem
exist.Can you get to F6,select s install floppy,select controller,select s
again,
select controller,this time you should get "Use drivers on floppy" or
windows,
select floppy,then press enter at next screen,continue on to installation
of xp.
Also,have you configured RAID in the RAID utility (loads after the BIOS,and
loads
as xp starts).You also,should format at least the #1 SATA drive before you
inst-
all xp,physically disconnect other SATA,boot to xp
cd,recovery,typeiskPart In
DiskPart,create partition,then press ESC key,then type:FORMAT C: /FS:ntfs

"Mario" wrote:

> New System build using Intel D945GNT motherboard since I have an old Windows
> XP Pro Disc and Don't have a Disc with SP2 I suspect hardware compatibility
> problem, can anyone suggest getting past this error and able to install the
> OS for Intel D945 Chipset. I have set up RAID 1 with the Intel Utility and it
> seems to work.
>
> Thanks in advance,
>
>