My chip is a P4 2.0 GHz and the cmos reports that after I press f1. My
mobo is a TH7ii RAID.

My memory is Samsung MR16R1628AF0-CK8 256x4.

When I enter the bios by pressing del the info on my chip is greyed out
(although it looks correct)

and the setting for my cpu is 800(100)

I just reset the CMOS and replaced the battery. I still get this
error.

I have read that there is a setting in the cmos "Speed Error Hold"
needs to be disabled. This

option in my cmos is disabled and greyed.

I have also read that I need to put the correct speed settings. They
are set at 800(100). Is this

the correct setting for a P4 2.0 Ghz chip?

There is a manual for the motherboard. Read it and change the settings
as per the directions. When you need help with the operating system,
post back.

kilowatt@charter.net wrote:

> My chip is a P4 2.0 GHz and the cmos reports that after I press f1. My
> mobo is a TH7ii RAID.
>
> My memory is Samsung MR16R1628AF0-CK8 256x4.
>
> When I enter the bios by pressing del the info on my chip is greyed out
> (although it looks correct)
>
> and the setting for my cpu is 800(100)
>
> I just reset the CMOS and replaced the battery. I still get this
> error.
>
> I have read that there is a setting in the cmos "Speed Error Hold"
> needs to be disabled. This
>
> option in my cmos is disabled and greyed.
>
> I have also read that I need to put the correct speed settings. They
> are set at 800(100). Is this
>
> the correct setting for a P4 2.0 Ghz chip?
>

The CPU hasn't been swapped or the motherboard changed without reloading XP?

Where is the message being given? Windows or bios error?

"kilowatt@charter.net" wrote:

> My chip is a P4 2.0 GHz and the cmos reports that after I press f1. My
> mobo is a TH7ii RAID.
>
> My memory is Samsung MR16R1628AF0-CK8 256x4.
>
> When I enter the bios by pressing del the info on my chip is greyed out
> (although it looks correct)
>
> and the setting for my cpu is 800(100)
>
> I just reset the CMOS and replaced the battery. I still get this
> error.
>
> I have read that there is a setting in the cmos "Speed Error Hold"
> needs to be disabled. This
>
> option in my cmos is disabled and greyed.
>
> I have also read that I need to put the correct speed settings. They
> are set at 800(100). Is this
>
> the correct setting for a P4 2.0 Ghz chip?
>
>