hidden USB peripheral

Sometimes when I plug in a new USB peripheral the installation is successfull
but it is not available in the "explorer". In the properties it says that it
is in location 0; is that the problem ?
The installed device is visible in the "unplug or eject hardware" task.
This happend first with an external HD and to day with an USB/IDE converter.
Can anyone help?
--
DCO

DCO Wrote:
> Sometimes when I plug in a new USB peripheral the installation is
> successfull
> but it is not available in the "explorer". In the properties it says
> that it
> is in location 0; is that the problem ?
> The installed device is visible in the "unplug or eject hardware"
> task.
> This happend first with an external HD and to day with an USB/IDE
> converter.
> Can anyone help?
> --
> DCO

Does the device itself actually works? Try reinstalling a device driver
for it if there is one. If not, try plugging in the USB device and then
going into Disk Managment and try changing the drive letter to another
letter.


--
Evolution54

Keep your dirve pluged and reboot the PC and it will recognize it.
I 've tried this on my laptop and external HD, it works!
"DCO" <DCO@discussions.microsoft.com> ¼¶¼g©ó¶l¥ó·s»D:9E0C9D2F-8823-4C84-8C1B-8D3330362081@microsoft.com...
> Sometimes when I plug in a new USB peripheral the installation is
> successfull
> but it is not available in the "explorer". In the properties it says that
> it
> is in location 0; is that the problem ?
> The installed device is visible in the "unplug or eject hardware" task.
> This happend first with an external HD and to day with an USB/IDE
> converter.
> Can anyone help?
> --
> DCO

No consolation for you, but I have the same problem.
USB mouse & keyboard work fine.
self powered USB hard drive won't show in explorer.
Device manager reports both the USB port and the hard drive as working
correctly.
Disk manager shows it as 'not initialized'.

Plugging into other PCs the USB hard drive works fine.

Took the drive to my PC makers local workshop and plugged into identical
model straight out of the box and all was fine.
Went home and removed all peripherals and had success.
Main culprit seemed to be a pcmcia wireless network card. Toshiba laptop
seems to see the slot as a potential hard drive for one of their own
accessories so I thought that was that. Unplug the network card, reboot,
plug in the USB drive and away i went.

For about 4 weeks.

Now nothing can get explorer to see the drive. I assume this is because the
disk management system doesn't recognise the disk correctly, even though XP &
2000 on three other brands of PC recognise it instantly.

My advice is
1st to plug into another XP box just to be sure your USB drive is working and
2nd unplug all other devices and try your USB drive after a reboot.
I'm close to rebuilding my PC to try to get success, but of course I can't
back it up anymore so am not keen to start from scratch with a stack of CDs.
Keep us posted of your trials and successes (hopefully).
Seems what I thought was a Toshiba specific problem might be more widespread
than expected.


"DCO" wrote:

> Sometimes when I plug in a new USB peripheral the installation is successfull
> but it is not available in the "explorer". In the properties it says that it
> is in location 0; is that the problem ?
> The installed device is visible in the "unplug or eject hardware" task.
> This happend first with an external HD and to day with an USB/IDE converter.
> Can anyone help?
> --
> DCO