Thanks - and sorry for the long delay in replying. I got a similar answer
else where but I should have known this to be a solution as I use Partition
Majic and have used Boot Magic many, many moons ago. Of course I could also
use LiLo or similar in Linux.

I was also playing with VMware, which may also solve my problems (as well as
give many more possible uses such as developing enviroments etc) and in an
even more convienent format.

Chris



"Ron Martell" <ron.martell@gmail.com> wrote in message
news:cfedm1h5qtf182m5n1qm8ma564iplvc66q@4ax.com...
> "Chris Swinney" <swin@fab-sas.co.uk> wrote:
>
> >Hi all,
> >
> >
> >
> >Is it possibly to create multiple Windows XP Pro installation on a single
> >computer to different partitions and HDD's whilst making sure that each
new
> >installations partition is referenced as the C drive?
> >
> >
> >
> >I'm pretty sure I managed to do this under Win NT (although my memory is
a
> >little foggy now) by marking a partition as active then rebooting. NT
would
> >then see the active partition as the System drive and so boot directly
from
> >that, instead of using the Boot.ini options. However, under XP, you can
mark
> >and ALL and ANY primary partitions as active (and there doesn't seem to
be a
> >way to unselecting this option natively), so this does not seem to work
> >unless you physically remove drives (which is of course no good if you
want
> >to install to a different partition on the same drive).
> >
> >
> >
> >The reason I want to do this is so that I can ghost any partition to a
new
> >drive and continue functioning correctly. The MS OEM tools that I have
used
> >in the past I believe allow me to strip out all pertinent hardware
> >information from the install, but I don't think they strip out all the
> >installed registry entries and shortcuts that will refer to the drive
letter
> >that the current drive happens to reside on.
> >
> >
>
> Yes you can do this, but you will need to install a third party Boot
> Manager program such as Boot Magic (part of Symantec's Partition
> Magic) or BootItNG (www.bootitng.com) and then configure it so that
> the non-booting operating system partitions are hidden.
>
> In order to install a new operating system and have it boot as drive
> C: you will need to:
> - Create the new partition and format it.
> - Configure the boot manager to include this new partition on the boot
> menu, hiding all the other bootable partitions.
> - Reboot the computer and choose the new empty partition to boot from.
> - When the computer halts with the "missing operating system" (or
> similar prompt insert your installation CD for the new O/S and reboot
> the computer. You can now install the new O/S and it will be drive C:
>
> Good luck
>
> Ron Martell Duncan B.C. Canada
> --
> Microsoft MVP
> On-Line Help Computer Service
> http://onlinehelp.bc.ca
>
> In memory of a dear friend Alex Nichol MVP
> http://aumha.org/alex.htm