Setup could not read the CD you inserted...


Go Back   Computer Help Articles > Windows XP Setup Deployment
User Name
Password
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-05-2006, 06:09 AM
JRW
 
Posts: n/a
Default Setup could not read the CD you inserted...

Had to replace a bad hard drive. When attempting new install of Windows XP
Home, Setup loads files, I agree to the licensing agreement, then I get the
following message:

Setup cannot find a previous version of Windows installed on your computer.
To continue, Setup needs to verify that you qualify to use this upgrade
product. Please insert one of the following Windows prodjuct CDs into the
CD-ROM drive: Windows XP Home Edition (Full Version)... When the CD is in
the drive, press ENTER.

I do as instructed with a replacement CD purchased from Microsoft because
they recommended that my original XP Home CD was at fault. Every time I
press ENTER, as instructed, the same error message as above comes up on the
screen.

BIOS is set to load off CD-ROM, followed by the Hard Drive.

Thank you, in advance, for any advise you can provide.

Jim
--
JRW
Reply With Quote
  #2  
Old 01-05-2006, 06:09 AM
Pegasus \(MVP\)
 
Posts: n/a
Default Re: Setup could not read the CD you inserted...


"JRW" <JRW@discussions.microsoft.com> wrote in message
news:52A43D15-EF14-45CF-B1E6-B2CFE327FD43@microsoft.com...
> Had to replace a bad hard drive. When attempting new install of Windows

XP
> Home, Setup loads files, I agree to the licensing agreement, then I get

the
> following message:
>
> Setup cannot find a previous version of Windows installed on your

computer.
> To continue, Setup needs to verify that you qualify to use this upgrade
> product. Please insert one of the following Windows prodjuct CDs into

the
> CD-ROM drive: Windows XP Home Edition (Full Version)... When the CD is in
> the drive, press ENTER.
>
> I do as instructed with a replacement CD purchased from Microsoft because
> they recommended that my original XP Home CD was at fault. Every time I
> press ENTER, as instructed, the same error message as above comes up on

the
> screen.
>
> BIOS is set to load off CD-ROM, followed by the Hard Drive.
>
> Thank you, in advance, for any advise you can provide.
>
> Jim
> --
> JRW


It appears that your current WinXP is an upgrade CD. It expects you to
have the CD for the original product, e.g. WinXP Home (Full Version).
Please insert it when prompted to do so.


Reply With Quote
  #3  
Old 01-05-2006, 06:09 AM
Dixonian69
 
Posts: n/a
Default RE: Setup could not read the CD you inserted...

Like Pegasus says it looks like you have an Upgrade version that you trying
to use for "CLean Install".

Do you have original OS CD? possibly Win 9X/ME/NT
When prompted for "Previous Version", install original OS CD in CD drive.
Setup will read it and continue. Can put in second cd drive or swap CDs, if
you only have one CD drive.

--
Dennis S.
I''m from Illinois. I hope I helped you. Good Luck.


"JRW" wrote:

> Had to replace a bad hard drive. When attempting new install of Windows XP
> Home, Setup loads files, I agree to the licensing agreement, then I get the
> following message:
>
> Setup cannot find a previous version of Windows installed on your computer.
> To continue, Setup needs to verify that you qualify to use this upgrade
> product. Please insert one of the following Windows prodjuct CDs into the
> CD-ROM drive: Windows XP Home Edition (Full Version)... When the CD is in
> the drive, press ENTER.
>
> I do as instructed with a replacement CD purchased from Microsoft because
> they recommended that my original XP Home CD was at fault. Every time I
> press ENTER, as instructed, the same error message as above comes up on the
> screen.
>
> BIOS is set to load off CD-ROM, followed by the Hard Drive.
>
> Thank you, in advance, for any advise you can provide.
>
> Jim
> --
> JRW

Reply With Quote
  #4  
Old 01-05-2006, 06:09 AM
Bob@see-below-for-address.com
 
Posts: n/a
Default Re: Setup could not read the CD you inserted...

On Sun, 6 Nov 2005 17:40:20 -0800, Dixonian69 wrote:

> Like Pegasus says it looks like you have an Upgrade version that you trying
> to use for "CLean Install".
>
> Do you have original OS CD? possibly Win 9X/ME/NT
> When prompted for "Previous Version", install original OS CD in CD drive.
> Setup will read it and continue. Can put in second cd drive or swap CDs, if
> you only have one CD drive.


Not true. I had the retail version of Win XP Home SP2, and I received the
same message when doing a completely new install on a newly formatted HDD.
I simply inserted my Win 98 disk and continued the install.

I have installed dozens of versions of windows going back to 3.1. Windows
never installs the same way twice.
--
r.s.nevin@att.net
Reply With Quote
  #5  
Old 01-05-2006, 06:09 AM
JRW
 
Posts: n/a
Default RE: Setup could not read the CD you inserted...

Pegasus and Dixonian,

Thank you for helping this rookie past this issue. I know this is probably
Windows 101 to you guys, but to me it was like putting a puzzle together
without the picture on the box.

Cheers,

JRW

--
JRW

> Like Pegasus says it looks like you have an Upgrade version that you trying
> to use for "CLean Install".
>
> Do you have original OS CD? possibly Win 9X/ME/NT
> When prompted for "Previous Version", install original OS CD in CD drive.
> Setup will read it and continue. Can put in second cd drive or swap CDs, if
> you only have one CD drive.
>
> --
> Dennis S.
> I''m from Illinois. I hope I helped you. Good Luck.
>
>
> "JRW" wrote:
>
> > Had to replace a bad hard drive. When attempting new install of Windows XP
> > Home, Setup loads files, I agree to the licensing agreement, then I get the
> > following message:
> >
> > Setup cannot find a previous version of Windows installed on your computer.
> > To continue, Setup needs to verify that you qualify to use this upgrade
> > product. Please insert one of the following Windows prodjuct CDs into the
> > CD-ROM drive: Windows XP Home Edition (Full Version)... When the CD is in
> > the drive, press ENTER.
> >
> > I do as instructed with a replacement CD purchased from Microsoft because
> > they recommended that my original XP Home CD was at fault. Every time I
> > press ENTER, as instructed, the same error message as above comes up on the
> > screen.
> >
> > BIOS is set to load off CD-ROM, followed by the Hard Drive.
> >
> > Thank you, in advance, for any advise you can provide.
> >
> > Jim
> > --
> > JRW

Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trouble with old SUS client Remy G. Windows Update 2 01-05-2006 05:20 PM
Error 0x8024d007 MPearl Windows Update 1 01-05-2006 05:18 PM
Update installation fails Harold Cataquet Windows Update 23 01-05-2006 05:17 PM
0x80070002 - DataStore GONE?! jmac30 Windows Update 3 01-05-2006 05:12 PM
Error number: 0x8024D007 kimhuai Windows Update 2 01-05-2006 05:09 PM


All times are GMT. The time now is 06:40 PM.


Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. SEO by vBSEO 2.3.2 © 2005, Crawlability, Inc.

Setup could not read the CD you inserted...