New Hard Drive in Windows XP

Question - Windows doesn't recognize the full Hard Drive size. How can I
correct this?

I bought a Western Digital 160GB Hard Drive, my old one (40 GB) crashed. I
installed and formatted it using Data Lifeguard Tools (came with Hard Drive).
The BIOS recognized the drive as 160GB.
I loaded my Windows XP Home disk, which included SP1a. After it finished
loading, I looked at the HD size and it shows as 149 GB. I have since loaded
SP2.
Because it shows 149 GB, I must be okay with the "no bigger than 137 GB"
issue.
Thanks...

From the Western Digital support web site:

Determining drive capacity can be confusing at times because
of the different measurement standards that are often used. When
dealing with Windows and Mac based systems, you will commonly
see both decimal measurements and binary measurements of a drive's
capacity. In either case, a drive's capacity is measured by using the total
number of bytes available on the drive. As long as the
drive displays the correct number of bytes (approximate), you are
getting the drive's full capacity.


Decimal vs. Binary:
For simplicity and consistency, hard drive manufacturers define a
megabyte as 1,000,000 bytes and a gigabyte as 1,000,000,000 bytes.
This is a decimal (base 10) measurement and is the industry standard.
However, certain system BIOSs, FDISK and Windows define a
megabyte as 1,048,576 bytes and a gigabyte as 1,073,741,824 bytes.
Mac systems also use these values. These are binary (base 2)
measurements.

To Determine Decimal Capacity:
A decimal capacity is determined by dividing the total number of bytes,
by the number of bytes per gigabyte (1,000,000,000 using base 10).

To Determine Binary Capacity:
A binary capacity is determined by dividing the total number of bytes,
by the number of bytes per gigabyte (1,073,741,824 using base 2).
This is why different utilities will report different capacities for the same drive.
The number of bytes is the same, but a
different number of bytes is used to make a megabyte and a gigabyte.
This is similar to the difference between 0 degrees Celsius and
32 degrees Fahrenheit. It is the same temperature, but will be reported
differently depending on the scale you are using.

------------------------------Â*------------------------------Â*--------------------

Various Drive Sizes and their Binary and Decimal Capacities:

Drive Size in GB Approximate Total Bytes Decimal Capacity
(bytes/1,000,000,000)

Approximate Binary Capacity (bytes/1,073,724,841)
10 GB 10,000,000,000 10 GB 9.31 GB
20 GB 20,000,000,000 20 GB 18.63 GB
30 GB 30,000,000,000 30 GB 27.94 GB
40 GB 40,000,000,000 40 GB 37.25 GB
60 GB 60,000,000,000 60 GB 55.88 GB
80 GB 80,000,000,000 80 GB 74.51 GB
100 GB 100,000,000,000 100 GB 93.13 GB
120 GB 120,000,000,000 120 GB 111.76 GB
160 GB 160,000,000,000 160 GB 149.01 GB
180 GB 180,000,000,000 180 GB 167.64 GB
200 GB 200,000,000,000 200 GB 186.26 GB
250 GB 250,000,000,000 250 GB 232.83 GB

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

"Rooster" wrote:

| Question - Windows doesn't recognize the full Hard Drive size. How can I
| correct this?
|
| I bought a Western Digital 160GB Hard Drive, my old one (40 GB) crashed. I
| installed and formatted it using Data Lifeguard Tools (came with Hard Drive).
| The BIOS recognized the drive as 160GB.
| I loaded my Windows XP Home disk, which included SP1a. After it finished
| loading, I looked at the HD size and it shows as 149 GB. I have since loaded
| SP2.
| Because it shows 149 GB, I must be okay with the "no bigger than 137 GB"
| issue.
| Thanks...

Perfect. Thanks for the details. I understood the basic premise, but didn't
realize what the actual number would be. Thank you for taking the time to
fully explain and give my capacity info. When I was looking through all of
the other posts that were similar, I thought that I was potentially going to
have to do a lot of different things to recover my perceived lost space.
Have a great Holday season.

"Carey Frisch [MVP]" wrote:

> From the Western Digital support web site:
>
> Determining drive capacity can be confusing at times because
> of the different measurement standards that are often used. When
> dealing with Windows and Mac based systems, you will commonly
> see both decimal measurements and binary measurements of a drive's
> capacity. In either case, a drive's capacity is measured by using the total
> number of bytes available on the drive. As long as the
> drive displays the correct number of bytes (approximate), you are
> getting the drive's full capacity.
>
>
> Decimal vs. Binary:
> For simplicity and consistency, hard drive manufacturers define a
> megabyte as 1,000,000 bytes and a gigabyte as 1,000,000,000 bytes.
> This is a decimal (base 10) measurement and is the industry standard.
> However, certain system BIOSs, FDISK and Windows define a
> megabyte as 1,048,576 bytes and a gigabyte as 1,073,741,824 bytes.
> Mac systems also use these values. These are binary (base 2)
> measurements.
>
> To Determine Decimal Capacity:
> A decimal capacity is determined by dividing the total number of bytes,
> by the number of bytes per gigabyte (1,000,000,000 using base 10).
>
> To Determine Binary Capacity:
> A binary capacity is determined by dividing the total number of bytes,
> by the number of bytes per gigabyte (1,073,741,824 using base 2).
> This is why different utilities will report different capacities for the same drive.
> The number of bytes is the same, but a
> different number of bytes is used to make a megabyte and a gigabyte.
> This is similar to the difference between 0 degrees Celsius and
> 32 degrees Fahrenheit. It is the same temperature, but will be reported
> differently depending on the scale you are using.
>
> ------------------------------Â*------------------------------Â*--------------------
>
> Various Drive Sizes and their Binary and Decimal Capacities:
>
> Drive Size in GB Approximate Total Bytes Decimal Capacity
> (bytes/1,000,000,000)
>
> Approximate Binary Capacity (bytes/1,073,724,841)
> 10 GB 10,000,000,000 10 GB 9.31 GB
> 20 GB 20,000,000,000 20 GB 18.63 GB
> 30 GB 30,000,000,000 30 GB 27.94 GB
> 40 GB 40,000,000,000 40 GB 37.25 GB
> 60 GB 60,000,000,000 60 GB 55.88 GB
> 80 GB 80,000,000,000 80 GB 74.51 GB
> 100 GB 100,000,000,000 100 GB 93.13 GB
> 120 GB 120,000,000,000 120 GB 111.76 GB
> 160 GB 160,000,000,000 160 GB 149.01 GB
> 180 GB 180,000,000,000 180 GB 167.64 GB
> 200 GB 200,000,000,000 200 GB 186.26 GB
> 250 GB 250,000,000,000 250 GB 232.83 GB
>
> --
> Carey Frisch
> Microsoft MVP
> Windows - Shell/User
> Microsoft Community Newsgroups
> news://msnews.microsoft.com/
>
> -------------------------------------------------------------------------------------------
>
> "Rooster" wrote:
>
> | Question - Windows doesn't recognize the full Hard Drive size. How can I
> | correct this?
> |
> | I bought a Western Digital 160GB Hard Drive, my old one (40 GB) crashed. I
> | installed and formatted it using Data Lifeguard Tools (came with Hard Drive).
> | The BIOS recognized the drive as 160GB.
> | I loaded my Windows XP Home disk, which included SP1a. After it finished
> | loading, I looked at the HD size and it shows as 149 GB. I have since loaded
> | SP2.
> | Because it shows 149 GB, I must be okay with the "no bigger than 137 GB"
> | issue.
> | Thanks...
>
>