Richard wrote:
> I get the message "Remote Assistance Failed. Please Try Again" when I
> respond to a request for RA. RA used to work fine, but now the
> error. I'm running XP Pro SP2 and all current updates. I'm behind a
> SpeedStream router with port 3389 open. Tried bypassing the router -
> same result. RA works OK using another PC plugged into same router.
> I use RA to help my Dad with his PC (also XP Pro SP2, but no router)
> both are broadband Earthlink (me) and Charter (Dad). I've read many
> forums and MS sites on the subject, but have had no success. Any
> help would be greatly appreciated.

I use it often - on many machine with many different configurations and do
not have the trouble you describe.
Printing.. Copy/Paste text, etc - all work great.

I do utilize the Windows 2003 RDC instead of the one that came with Windows
XP - so that MAY make a difference..

Otherwise - the only trouble I had with these options was when i installed
SP2 and then would have more than one RD connection open at a time - it
sometimes would not copy/paste unless I closed all but one of the sessions.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html

Yes, I too had good results using remote assistance in the past on this PC
even after SP2, but now I get the described error message. A MS page I
recently visited talked about a "hotfix" and said to check the "dphnpast.dll"
file. I searched my PC and found I didn't have this file so I ran sfc.exe and
was able to extract and install it from my installation CD hoping that was
the problem, but unfortunately, no. Please stay with me on this to help solve
my problem or perhaps direct me to a source to research it further. Thanks.

"Shenan Stanley" wrote:

> Richard wrote:
> > I get the message "Remote Assistance Failed. Please Try Again" when I
> > respond to a request for RA. RA used to work fine, but now the
> > error. I'm running XP Pro SP2 and all current updates. I'm behind a
> > SpeedStream router with port 3389 open. Tried bypassing the router -
> > same result. RA works OK using another PC plugged into same router.
> > I use RA to help my Dad with his PC (also XP Pro SP2, but no router)
> > both are broadband Earthlink (me) and Charter (Dad). I've read many
> > forums and MS sites on the subject, but have had no success. Any
> > help would be greatly appreciated.
>
> I use it often - on many machine with many different configurations and do
> not have the trouble you describe.
> Printing.. Copy/Paste text, etc - all work great.
>
> I do utilize the Windows 2003 RDC instead of the one that came with Windows
> XP - so that MAY make a difference..
>
> Otherwise - the only trouble I had with these options was when i installed
> SP2 and then would have more than one RD connection open at a time - it
> sometimes would not copy/paste unless I closed all but one of the sessions.
>
> --
> Shenan Stanley
> MS-MVP
> --
> How To Ask Questions The Smart Way
> http://www.catb.org/~esr/faqs/smart-questions.html
>
>
>

I have the same problem. Others can see my desktop, but I can't see theirs (I
get teh Remote Assistance Failed. Try Again." message.

I have:

1) opened port forwarding in my router for port 3389
2) checked "remote assistance" and "remote terminal" exceptions in Windopws
firewall
3) turned of the Windows firewall

Nothing worked


"Richard" wrote:

> Yes, I too had good results using remote assistance in the past on this PC
> even after SP2, but now I get the described error message. A MS page I
> recently visited talked about a "hotfix" and said to check the "dphnpast.dll"
> file. I searched my PC and found I didn't have this file so I ran sfc.exe and
> was able to extract and install it from my installation CD hoping that was
> the problem, but unfortunately, no. Please stay with me on this to help solve
> my problem or perhaps direct me to a source to research it further. Thanks.
>
> "Shenan Stanley" wrote:
>
> > Richard wrote:
> > > I get the message "Remote Assistance Failed. Please Try Again" when I
> > > respond to a request for RA. RA used to work fine, but now the
> > > error. I'm running XP Pro SP2 and all current updates. I'm behind a
> > > SpeedStream router with port 3389 open. Tried bypassing the router -
> > > same result. RA works OK using another PC plugged into same router.
> > > I use RA to help my Dad with his PC (also XP Pro SP2, but no router)
> > > both are broadband Earthlink (me) and Charter (Dad). I've read many
> > > forums and MS sites on the subject, but have had no success. Any
> > > help would be greatly appreciated.
> >
> > I use it often - on many machine with many different configurations and do
> > not have the trouble you describe.
> > Printing.. Copy/Paste text, etc - all work great.
> >
> > I do utilize the Windows 2003 RDC instead of the one that came with Windows
> > XP - so that MAY make a difference..
> >
> > Otherwise - the only trouble I had with these options was when i installed
> > SP2 and then would have more than one RD connection open at a time - it
> > sometimes would not copy/paste unless I closed all but one of the sessions.
> >
> > --
> > Shenan Stanley
> > MS-MVP
> > --
> > How To Ask Questions The Smart Way
> > http://www.catb.org/~esr/faqs/smart-questions.html
> >
> >
> >

Aloha Cliff,
From what I've been able to determine so far, the person giving Remote
Assistance doesn't need to be concerned about port forwarding. Only the
person receiving the RA if he(she) is behind a router. In my case the
receiver is not behind a router and I can connect to him with other Pcs
behind my router, but my PC generates the "Remote Assistance Failed" message.
That pretty much leaves some setting or registry value that got changed or
corrupted in WinXP.
I'm glad you tagged onto my post and hope someone in the know will get us
some help. I'm pretty sure there are others having this problem. I've been
pretty dilligent in trying to find a fix and I think exhausted all I can
think of short of the "Pay per incident" from MS (which hasn't proved very
helpfull in the past). HELP, PLEASE


"Cliff Reeves" wrote:

> I have the same problem. Others can see my desktop, but I can't see theirs (I
> get teh Remote Assistance Failed. Try Again." message.
>
> I have:
>
> 1) opened port forwarding in my router for port 3389
> 2) checked "remote assistance" and "remote terminal" exceptions in Windopws
> firewall
> 3) turned of the Windows firewall
>
> Nothing worked
>
>
> "Richard" wrote:
>
> > Yes, I too had good results using remote assistance in the past on this PC
> > even after SP2, but now I get the described error message. A MS page I
> > recently visited talked about a "hotfix" and said to check the "dphnpast.dll"
> > file. I searched my PC and found I didn't have this file so I ran sfc.exe and
> > was able to extract and install it from my installation CD hoping that was
> > the problem, but unfortunately, no. Please stay with me on this to help solve
> > my problem or perhaps direct me to a source to research it further. Thanks.
> >
> > "Shenan Stanley" wrote:
> >
> > > Richard wrote:
> > > > I get the message "Remote Assistance Failed. Please Try Again" when I
> > > > respond to a request for RA. RA used to work fine, but now the
> > > > error. I'm running XP Pro SP2 and all current updates. I'm behind a
> > > > SpeedStream router with port 3389 open. Tried bypassing the router -
> > > > same result. RA works OK using another PC plugged into same router.
> > > > I use RA to help my Dad with his PC (also XP Pro SP2, but no router)
> > > > both are broadband Earthlink (me) and Charter (Dad). I've read many
> > > > forums and MS sites on the subject, but have had no success. Any
> > > > help would be greatly appreciated.
> > >
> > > I use it often - on many machine with many different configurations and do
> > > not have the trouble you describe.
> > > Printing.. Copy/Paste text, etc - all work great.
> > >
> > > I do utilize the Windows 2003 RDC instead of the one that came with Windows
> > > XP - so that MAY make a difference..
> > >
> > > Otherwise - the only trouble I had with these options was when i installed
> > > SP2 and then would have more than one RD connection open at a time - it
> > > sometimes would not copy/paste unless I closed all but one of the sessions.
> > >
> > > --
> > > Shenan Stanley
> > > MS-MVP
> > > --
> > > How To Ask Questions The Smart Way
> > > http://www.catb.org/~esr/faqs/smart-questions.html
> > >
> > >
> > >

oRichard ... I have adeal for you!

I have a "Quick Assistance" card for a free supprt call, but as a MSFT
employee I can't use it ... drop me an email cliff.reeves@microsft.com and
I'll provide you the info you need to use the card.

Cliff

"Richard" wrote:

> Aloha Cliff,
> From what I've been able to determine so far, the person giving Remote
> Assistance doesn't need to be concerned about port forwarding. Only the
> person receiving the RA if he(she) is behind a router. In my case the
> receiver is not behind a router and I can connect to him with other Pcs
> behind my router, but my PC generates the "Remote Assistance Failed" message.
> That pretty much leaves some setting or registry value that got changed or
> corrupted in WinXP.
> I'm glad you tagged onto my post and hope someone in the know will get us
> some help. I'm pretty sure there are others having this problem. I've been
> pretty dilligent in trying to find a fix and I think exhausted all I can
> think of short of the "Pay per incident" from MS (which hasn't proved very
> helpfull in the past). HELP, PLEASE
>
>
> "Cliff Reeves" wrote:
>
> > I have the same problem. Others can see my desktop, but I can't see theirs (I
> > get teh Remote Assistance Failed. Try Again." message.
> >
> > I have:
> >
> > 1) opened port forwarding in my router for port 3389
> > 2) checked "remote assistance" and "remote terminal" exceptions in Windopws
> > firewall
> > 3) turned of the Windows firewall
> >
> > Nothing worked
> >
> >
> > "Richard" wrote:
> >
> > > Yes, I too had good results using remote assistance in the past on this PC
> > > even after SP2, but now I get the described error message. A MS page I
> > > recently visited talked about a "hotfix" and said to check the "dphnpast.dll"
> > > file. I searched my PC and found I didn't have this file so I ran sfc.exe and
> > > was able to extract and install it from my installation CD hoping that was
> > > the problem, but unfortunately, no. Please stay with me on this to help solve
> > > my problem or perhaps direct me to a source to research it further. Thanks.
> > >
> > > "Shenan Stanley" wrote:
> > >
> > > > Richard wrote:
> > > > > I get the message "Remote Assistance Failed. Please Try Again" when I
> > > > > respond to a request for RA. RA used to work fine, but now the
> > > > > error. I'm running XP Pro SP2 and all current updates. I'm behind a
> > > > > SpeedStream router with port 3389 open. Tried bypassing the router -
> > > > > same result. RA works OK using another PC plugged into same router.
> > > > > I use RA to help my Dad with his PC (also XP Pro SP2, but no router)
> > > > > both are broadband Earthlink (me) and Charter (Dad). I've read many
> > > > > forums and MS sites on the subject, but have had no success. Any
> > > > > help would be greatly appreciated.
> > > >
> > > > I use it often - on many machine with many different configurations and do
> > > > not have the trouble you describe.
> > > > Printing.. Copy/Paste text, etc - all work great.
> > > >
> > > > I do utilize the Windows 2003 RDC instead of the one that came with Windows
> > > > XP - so that MAY make a difference..
> > > >
> > > > Otherwise - the only trouble I had with these options was when i installed
> > > > SP2 and then would have more than one RD connection open at a time - it
> > > > sometimes would not copy/paste unless I closed all but one of the sessions.
> > > >
> > > > --
> > > > Shenan Stanley
> > > > MS-MVP
> > > > --
> > > > How To Ask Questions The Smart Way
> > > > http://www.catb.org/~esr/faqs/smart-questions.html
> > > >
> > > >
> > > >

Hello, has anyone resolved this issue yet, I am also trying to connect to my
dads computer with no luck.

"Cliff Reeves" wrote:

> oRichard ... I have adeal for you!
>
> I have a "Quick Assistance" card for a free supprt call, but as a MSFT
> employee I can't use it ... drop me an email cliff.reeves@microsft.com and
> I'll provide you the info you need to use the card.
>
> Cliff
>
> "Richard" wrote:
>
> > Aloha Cliff,
> > From what I've been able to determine so far, the person giving Remote
> > Assistance doesn't need to be concerned about port forwarding. Only the
> > person receiving the RA if he(she) is behind a router. In my case the
> > receiver is not behind a router and I can connect to him with other Pcs
> > behind my router, but my PC generates the "Remote Assistance Failed" message.
> > That pretty much leaves some setting or registry value that got changed or
> > corrupted in WinXP.
> > I'm glad you tagged onto my post and hope someone in the know will get us
> > some help. I'm pretty sure there are others having this problem. I've been
> > pretty dilligent in trying to find a fix and I think exhausted all I can
> > think of short of the "Pay per incident" from MS (which hasn't proved very
> > helpfull in the past). HELP, PLEASE
> >
> >
> > "Cliff Reeves" wrote:
> >
> > > I have the same problem. Others can see my desktop, but I can't see theirs (I
> > > get teh Remote Assistance Failed. Try Again." message.
> > >
> > > I have:
> > >
> > > 1) opened port forwarding in my router for port 3389
> > > 2) checked "remote assistance" and "remote terminal" exceptions in Windopws
> > > firewall
> > > 3) turned of the Windows firewall
> > >
> > > Nothing worked
> > >
> > >
> > > "Richard" wrote:
> > >
> > > > Yes, I too had good results using remote assistance in the past on this PC
> > > > even after SP2, but now I get the described error message. A MS page I
> > > > recently visited talked about a "hotfix" and said to check the "dphnpast.dll"
> > > > file. I searched my PC and found I didn't have this file so I ran sfc.exe and
> > > > was able to extract and install it from my installation CD hoping that was
> > > > the problem, but unfortunately, no. Please stay with me on this to help solve
> > > > my problem or perhaps direct me to a source to research it further. Thanks.
> > > >
> > > > "Shenan Stanley" wrote:
> > > >
> > > > > Richard wrote:
> > > > > > I get the message "Remote Assistance Failed. Please Try Again" when I
> > > > > > respond to a request for RA. RA used to work fine, but now the
> > > > > > error. I'm running XP Pro SP2 and all current updates. I'm behind a
> > > > > > SpeedStream router with port 3389 open. Tried bypassing the router -
> > > > > > same result. RA works OK using another PC plugged into same router.
> > > > > > I use RA to help my Dad with his PC (also XP Pro SP2, but no router)
> > > > > > both are broadband Earthlink (me) and Charter (Dad). I've read many
> > > > > > forums and MS sites on the subject, but have had no success. Any
> > > > > > help would be greatly appreciated.
> > > > >
> > > > > I use it often - on many machine with many different configurations and do
> > > > > not have the trouble you describe.
> > > > > Printing.. Copy/Paste text, etc - all work great.
> > > > >
> > > > > I do utilize the Windows 2003 RDC instead of the one that came with Windows
> > > > > XP - so that MAY make a difference..
> > > > >
> > > > > Otherwise - the only trouble I had with these options was when i installed
> > > > > SP2 and then would have more than one RD connection open at a time - it
> > > > > sometimes would not copy/paste unless I closed all but one of the sessions.
> > > > >
> > > > > --
> > > > > Shenan Stanley
> > > > > MS-MVP
> > > > > --
> > > > > How To Ask Questions The Smart Way
> > > > > http://www.catb.org/~esr/faqs/smart-questions.html
> > > > >
> > > > >
> > > > >

Sorry to say that I have not received any meaningful responses yet. I even
tried a newsgroup on DSLReports.com, but no help there either. If you find a
solution, please let me know and I'll do the same.

"stewstein" wrote:

> Hello, has anyone resolved this issue yet, I am also trying to connect to my
> dads computer with no luck.
>
> "Cliff Reeves" wrote:
>
> > oRichard ... I have adeal for you!
> >
> > I have a "Quick Assistance" card for a free supprt call, but as a MSFT
> > employee I can't use it ... drop me an email cliff.reeves@microsft.com and
> > I'll provide you the info you need to use the card.
> >
> > Cliff
> >
> > "Richard" wrote:
> >
> > > Aloha Cliff,
> > > From what I've been able to determine so far, the person giving Remote
> > > Assistance doesn't need to be concerned about port forwarding. Only the
> > > person receiving the RA if he(she) is behind a router. In my case the
> > > receiver is not behind a router and I can connect to him with other Pcs
> > > behind my router, but my PC generates the "Remote Assistance Failed" message.
> > > That pretty much leaves some setting or registry value that got changed or
> > > corrupted in WinXP.
> > > I'm glad you tagged onto my post and hope someone in the know will get us
> > > some help. I'm pretty sure there are others having this problem. I've been
> > > pretty dilligent in trying to find a fix and I think exhausted all I can
> > > think of short of the "Pay per incident" from MS (which hasn't proved very
> > > helpfull in the past). HELP, PLEASE
> > >
> > >
> > > "Cliff Reeves" wrote:
> > >
> > > > I have the same problem. Others can see my desktop, but I can't see theirs (I
> > > > get teh Remote Assistance Failed. Try Again." message.
> > > >
> > > > I have:
> > > >
> > > > 1) opened port forwarding in my router for port 3389
> > > > 2) checked "remote assistance" and "remote terminal" exceptions in Windopws
> > > > firewall
> > > > 3) turned of the Windows firewall
> > > >
> > > > Nothing worked
> > > >
> > > >
> > > > "Richard" wrote:
> > > >
> > > > > Yes, I too had good results using remote assistance in the past on this PC
> > > > > even after SP2, but now I get the described error message. A MS page I
> > > > > recently visited talked about a "hotfix" and said to check the "dphnpast.dll"
> > > > > file. I searched my PC and found I didn't have this file so I ran sfc.exe and
> > > > > was able to extract and install it from my installation CD hoping that was
> > > > > the problem, but unfortunately, no. Please stay with me on this to help solve
> > > > > my problem or perhaps direct me to a source to research it further. Thanks.
> > > > >
> > > > > "Shenan Stanley" wrote:
> > > > >
> > > > > > Richard wrote:
> > > > > > > I get the message "Remote Assistance Failed. Please Try Again" when I
> > > > > > > respond to a request for RA. RA used to work fine, but now the
> > > > > > > error. I'm running XP Pro SP2 and all current updates. I'm behind a
> > > > > > > SpeedStream router with port 3389 open. Tried bypassing the router -
> > > > > > > same result. RA works OK using another PC plugged into same router.
> > > > > > > I use RA to help my Dad with his PC (also XP Pro SP2, but no router)
> > > > > > > both are broadband Earthlink (me) and Charter (Dad). I've read many
> > > > > > > forums and MS sites on the subject, but have had no success. Any
> > > > > > > help would be greatly appreciated.
> > > > > >
> > > > > > I use it often - on many machine with many different configurations and do
> > > > > > not have the trouble you describe.
> > > > > > Printing.. Copy/Paste text, etc - all work great.
> > > > > >
> > > > > > I do utilize the Windows 2003 RDC instead of the one that came with Windows
> > > > > > XP - so that MAY make a difference..
> > > > > >
> > > > > > Otherwise - the only trouble I had with these options was when i installed
> > > > > > SP2 and then would have more than one RD connection open at a time - it
> > > > > > sometimes would not copy/paste unless I closed all but one of the sessions.
> > > > > >
> > > > > > --
> > > > > > Shenan Stanley
> > > > > > MS-MVP
> > > > > > --
> > > > > > How To Ask Questions The Smart Way
> > > > > > http://www.catb.org/~esr/faqs/smart-questions.html
> > > > > >
> > > > > >
> > > > > >