@ work, we run a terminal server on which one of our remote clients can
access, but sometimes after 3 or 4 minutes she getting the remote
computer has ended connection msg. for no "obvious" reason. The time
limits are very generous, and we have about 200 - 300 clients, all save
the one, no problem. I can be talking to her on the phone, have her
login, a few minutes later I'm still seeing her rdp port suddenly jump
to X minutes idle time, and she's saying she got the msg. They are
runnning XP professional SP2 (not positive on sp2, but will see
tomorrow) with a hi-speed (cable) connection, It usually tends to
happen between 4 and 5 in the afternoon (client's time), as much as I'd
like to see it's all on her end, that may not be the case. Any help?
Thanks -pickluh

You may try to modify MTU. We have seen many RDC over VPN. These link may help,

connectivity issues after ms05-019 and 2003 sp1 The actual MTU value that is required to work around this problem depends on ... However, an MTU value of 576 should help reduce the effect of the problem ...
http://www.howtonetworking.com/Troub...g/2003sp1a.htm


Black screen when rdp over vpn Troubleshooting: Since this is DSL line, we suspect this is MTU issue. ... Resolution: Use the ping to test and lower MTU. Finally, We reduce MTU from 1500 ...
www.howtonetworking.com/casestudy/mtu1.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"pickluh" <pickluh@gmail.com> wrote in message news:1133927201.324316.48240@g43g2000cwa.googlegro ups.com...
@ work, we run a terminal server on which one of our remote clients can
access, but sometimes after 3 or 4 minutes she getting the remote
computer has ended connection msg. for no "obvious" reason. The time
limits are very generous, and we have about 200 - 300 clients, all save
the one, no problem. I can be talking to her on the phone, have her
login, a few minutes later I'm still seeing her rdp port suddenly jump
to X minutes idle time, and she's saying she got the msg. They are
runnning XP professional SP2 (not positive on sp2, but will see
tomorrow) with a hi-speed (cable) connection, It usually tends to
happen between 4 and 5 in the afternoon (client's time), as much as I'd
like to see it's all on her end, that may not be the case. Any help?
Thanks -pickluh

Thanks for the advice Robert. The client was sitting behind a wireless
LAN, so I advised them to hardwire into the router, which they did...1
day gone by, no problems. Will keep holding my breathe, and will gladly
accept any more advice in case this solution isn't the fix I'm hoping
for. Thanks, pickluh

Thank you for the feedback. Please keep us update.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"pickluh" <pickluh@gmail.com> wrote in message news:1134056874.957267.56050@g43g2000cwa.googlegro ups.com...
Thanks for the advice Robert. The client was sitting behind a wireless
LAN, so I advised them to hardwire into the router, which they did...1
day gone by, no problems. Will keep holding my breathe, and will gladly
accept any more advice in case this solution isn't the fix I'm hoping
for. Thanks, pickluh